Christian Friebe

An aqueous, polymer-based redox-flow battery using non-corrosive, safe, and low-cost materials.

For renewable energy sources such as solar, wind, and hydroelectric to be effectively used in the grid of the future, flexible and scalable energy-storage solutions are necessary to mitigate output fluctuations. Redox-flow batteries (RFBs) were first built in the 1940s and are considered a promising large-scale energy-storage technology. A limited number of redox-active materials—mainly metal salts, corrosive halogens, and low-molar-mass organic compounds—have been investigated as active materials, and only a few membrane materials, such as Nafion, have been considered for RFBs. However, for systems that are intended for both domestic and large-scale use, safety and cost must be taken into account as well as energy density and capacity, particularly regarding long-term access to metal resources, which places limits on the lithium-ion-based and vanadium-based RFB development. Here we describe an affordable, safe, and scalable battery system, which uses organic polymers as the charge-storage material in combination with inexpensive dialysis membranes, which separate the anode and the cathode by the retention of the non-metallic, active (macro-molecular) species, and an aqueous sodium chloride solution as the electrolyte. This water- and polymer-based RFB has an energy density of 10 watt hours per litre, current densities of up to 100 milliamperes per square centimetre, and stable long-term cycling capability. The polymer-based RFB we present uses an environmentally benign sodium chloride solution and cheap, commercially available filter membranes instead of highly corrosive acid electrolytes and expensive membrane materials.

Polymer-Based Organic Batteries

The storage of electric energy is of ever growing importance for our modern, technology-based society, and novel battery systems are in the focus of research. The substitution of conventional metals as redox-active material by organic materials offers a promising alternative for the next generation of rechargeable batteries since these organic batteries are excelling in charging speed and cycling stability. This review provides a comprehensive overview of these systems and discusses the numerous classes of organic, polymer-based active materials as well as auxiliary components of the battery, like additives or electrolytes. Moreover, a definition of important cell characteristics and an introduction to selected characterization techniques is provided, completed by the discussion of potential socio-economic impacts.

2-(1 H-1,2,3-Triazol-4-yl)-Pyridine Ligands as Alternatives to 2,2'-Bipyridines in Ruthenium(II) Complexes

The synthesis of a variety of 2-(1H-1,2,3-triazol-4-yl)-pyridines by click chemistry is demonstrated to provide straightforward access to mono-functionalized ligands. The ring-opening polymerization of epsilon-caprolactone initiated by such a mono-functionalized ligand highlights the synthetic potential of this class of bidentate ligands with respect to polymer chemistry or the attachment onto surfaces and nanoparticles. The coordination to Ru(II) ions results in homoleptic and heteroleptic complexes with the resultant photophysical and electrochemical properties strongly dependent on the number of these ligands attached to the Ru(II) core.

Metal‐containing Polymers via Electropolymerization

Electropolymerization represents a suitable and well-established approach for the assembly of polymer structures, in particular with regard to the formation of thin, insoluble films. Utilization of monomers that are functionalized with metal complex units allows the combination of structural and functional benefits of polymers and metal moieties. Since a broad range of both electropolymerizable monomers and metal complexes are available, various structures and, thus, applications are possible. Recent developments in the field of synthesis and potential applications of metal-functionalized polymers obtained via electropolymerization are presented, highlighting the significant advances in this field of research.

Ruthenium(II) photosensitizers of tridentate click-derived cyclometalating ligands: a joint experimental and computational study.

A systematic series of heteroleptic bis(tridentate)ruthenium(II) complexes of click-derived 1,3-bis(1,2,3-triazol-4-yl)benzene N^C^N-coordinating ligands was synthesized, analyzed by single crystal X-ray diffraction, investigated photophysically and electrochemically, and studied by computational methods. The presented comprehensive characterization allows a more detailed understanding of the radiationless deactivation mechanisms. Furthermore, we provide a fully optimized synthesis and systematic variations towards redox-matched, broadly and intensely absorbing, cyclometalated ruthenium(II) complexes. Most of them show a weak room-temperature emission and a prolonged excited-state lifetime. They display a broad absorption up to 700 nm and high molar extinction coefficients up to 20 000 M(-1)cm(-1) of the metal-to-ligand charge transfer bands, resulting in a black color. Thus, the complexes reveal great potential for dye-sensitized solar-cell applications.

Anion Receptors Based on Halogen Bonding with Halo-1,2,3-triazoliums

A systematic series of anion receptors based on bidentate halogen bonding by halo-triazoles and -triazoliums is presented. The influence of the halogen bond donor atom, the electron-withdrawing group, and the linker group that bridges the two donor moieties is investigated. Additionally, a comparison with hydrogen bond-based analogues is provided. A new, efficient synthetic approach to introduce different halogens into the heterocycles is established using silver(I)-triazolylidenes, which are converted to the corresponding halo-1,2,3-triazoliums with different halogens. Comprehensive nuclear magnetic resonance binding studies supported by isothermal titration calorimetry studies were performed with different halides and oxo-anions to evaluate the influence of key parameters of the halogen bond donor, namely, polarization of the halogen and the bond angle to the anion. The results show a larger anion affinity in the case of more charge-dense halides as well as a general preference of the receptors to bind oxo-anions, in particular sulfate, over halides.

Physicochemical Analysis of Ruthenium(II) Sensitizers of 1,2,3-Triazole-Derived Mesoionic Carbene and Cyclometalating Ligands

A series of heteroleptic bis(tridentate) ruthenium(II) complexes bearing ligands featuring 1,2,3-triazolide and 1,2,3-triazolylidene units are presented. The synthesis of the C^N^N-coordinated ruthenium(II) triazolide complex is achieved by direct C-H activation, which is enabled by the use of a 1,5-disubstituted triazole. By postcomplexation alkylation, the ruthenium(II) 1,2,3-triazolide complex can be converted to the corresponding 1,2,3-triazolylidene complex. Additionally, a ruthenium(II) complex featuring a C^N^C-coordinating bis(1,2,3-triazolylidene)pyridine ligand is prepared via transmetalation from a silver(I) triazolylidene precursor. The electronic consequences of the carbanion and mesoionic carbene donors are studied both experimentally and computationally. The presented complexes exhibit a broad absorption in the visible region as well as long lifetimes of the charge-separated excited state suggesting their application in photoredox catalysis and photovoltaics. Testing of the dyes in a conventional dye-sensitized solar cell (DSSC) generates, however, only modest power conversion efficiencies (PCEs).

Synthesis and characterization of TEMPO- and viologen-polymers for water-based redox-flow batteries

Redox-flow batteries that employ redox-active polymers (pRFB) represent a novel energy storage technology requiring innovative materials. Polymers bearing a viologen unit (N,N′-dialkyl-4,4′-bipyridines) or a TEMPO radical are synthesized. Acrylamide, poly(ethyleneglycol) methyl acrylates, di(ethylene glycol) methacrylate and 2-(methacryloyloxy)-N,N,N-trimethylethane ammonium chloride are studied as water-solubility-enhancing comonomers. The rheological and electrochemical properties of these polymers in aqueous solutions are evaluated, revealing poly(1-methyl-1′-(4-vinylbenzyl)-[4,4′-bipyridine]-1,1′-diium dichloride) (P2a) and poly(4-methacryloyloxy-2,2,6,6-tetramethylpiperidine-1-oxyl-co-2-(methacryloyloxy)-N,N,N-trimethylethane ammonium chloride) (P4e) to be most suited as anode and cathode materials, respectively, for a pRFB.

π‐Conjugated Donor and Donor–Acceptor Metallo‐Polymers

Two zinc(II)- and two ruthenium(II) containing π-conjugated metallo-polymers were synthesized and characterized in detail. We could prove by SEC, analytical ultracentrifugation (AUC) and viscosimetry the ruthenium(II) metallo-polymers to be high molar mass materials (M(fs)  = 20 000 g · mol(-1) Ru1-2; M(fs)  = 34 000 g · mol(-1) Ru1) exhibiting intrinsic viscosities of up to [η] = 192 · cm(3)  · g(-1) . Applying spin-coating we produced homogeneous films of the polymers and could, subsequently, investigate the photophysical properties in the solid state. Introducing the Ru(II) metallo-polymers mixed with PCBM[60] as photoactive layer in bulk-heterojunction solar cells resulted in very low efficiencies due to morphology problems.

Ruthenium(II) Metallo-Supramolecular Polymers of Click-Derived Tridentate Ditopic Ligands

New ditopic 2,6-bis(1,2,3-triazol-4-yl)pyridine ligands featuring a π-conjugated spacer and clicked-on solubilizing groups were employed in the synthesis of Ru(II) metallo-supramolecular polymers that exhibit an intense metal-to-ligand charge transfer absorption in the visible light region. The coordination polymers obtained were studied in solution by means of size exclusion chromatography and analytical ultracentrifugation, revealing a comparably high molar mass and moderate rigidity. Investigations in the solid state by atomic force and transmission electron microscopy confirmed the formation of rod-like polymers. Furthermore, film preparation by drop-casting showed good film-forming properties. Thus, the solution-processable, photoredoxactive polymers might be applicable in solar cells.