Christian Küster

Recent advances in the synthesis of hierarchically porous silica materials on the basis of porous glasses

The thermal phase separation and subsequent leaching of sodium borosilicate glasses is a well established route for the preparation of porous glasses exhibiting adjustable pore sizes in the range of 1 nm up to almost 1 μm as well as a very flexible geometric shape. The combination of this route with a large spectrum of synthesis strategies for the implementation of an additional pore system enables the preparation of hierarchically porous glass-based materials. This review covers a wide range of preparative routes for hierarchically porous silica materials starting from the sodium borosilicate glass with a special emphasis on the very recent developments in this versatile field of materials engineering.

Improving mass-transfer in controlled pore glasses as supports for the platinum-catalyzed aromatics hydrogenation†

The liquid-phase hydrogenation of toluene and other alkyl substituted benzene derivatives with different critical diameters was investigated over Pt-catalysts supported on spherical controlled pore glasses (CPGs) as model supports at 373 K in the batch mode. The effect of mass-transfer within the catalyst pores was studied by varying the pore width (4, 10, and 80 nm) and average grain size (18–150 μm) of the Pt/CPG catalysts. For toluene hydrogenation, internal mass-transfer limitations were absent (effectiveness factor >90%) only for catalysts with particle sizes below 25 μm and pore widths ≤10 nm or with a pore width of 80 nm and particle sizes around 75 μm, respectively. Effective diffusion coefficients obtained from initial reaction rates via the Thiele concept, e.g., 2.8 × 10−10 m2 s−1 for toluene over the catalyst with 10 nm pore width, were an order of magnitude lower than when determined by PFG-NMR. This difference was explained in terms of transport resistances such as surface barriers affecting the diffusivity assessment via the Thiele concept, while PFG-NMR measures intraparticle diffusion only.

Diffusion in complementary pore spaces

The rate of mass transfer is among the key numbers determining the efficiency of nanoporous materials in their use for matter upgrading by heterogeneous catalysis or mass separation. Transport enhancement by pore space optimization is, correspondingly, among the main strategies of efficiency promotion. Any such activity involves probing and testing of the appropriate routes of material synthesis and post-synthesis modification just as the exploration of the transport characteristics of the generated material. Modelling and molecular simulation is known to serve as a most helpful tool for correlating these two types of activities and their results. The present paper reports about a concerted research activity comprising these three types of activities. Recent progress in producing pore space replicas enabled focusing, in these studies, on “complementary” pore spaces, i.e. on pairs of material, where the pore space of one sample did just coincide with the solid space of the other. We report about the correlations in mass transfer as observable, in this type of material, by pulsed field gradient NMR diffusion studies, with reference to the prediction as resulting from a quite general, theoretical treatment of mass transfer in complementary pore spaces.