Christian Sternemann

Microscopic structure of water at elevated pressures and temperatures

We report on the microscopic structure of water at sub- and supercritical conditions studied using X-ray Raman spectroscopy, ab initio molecular dynamics simulations, and density functional theory. Systematic changes in the X-ray Raman spectra with increasing pressure and temperature are observed. Throughout the studied thermodynamic range, the experimental spectra can be interpreted with a structural model obtained from the molecular dynamics simulations. A spatial statistical analysis using Ripley’s K-function shows that this model is homogeneous on the nanometer length scale. According to the simulations, distortions of the hydrogen-bond network increase dramatically when temperature and pressure increase to the supercritical regime. In particular, the average number of hydrogen bonds per molecule decreases to ≈0.6 at 600 °C and p = 134 MPa.

Intercalation in Layered Metal–Organic Frameworks: Reversible Inclusion of an Extended π-System

We report the synthesis of layered [Zn(2)(bdc)(2)(H(2)O)(2)] and [Cu(2)(bdc)(2)(H(2)O)(2)] (bdc = benzdicarboxylate) metal-organic frameworks (MOF) carried out using the liquid-phase epitaxy approach employing self-assembled monolayer (SAM) modified Au-substrates. We obtain Cu and Zn MOF-2 structures, which have not yet been obtained using conventional, solvothermal synthesis methods. The 2D Cu(2+) dimer paddle wheel planes characteristic for the MOF are found to be strictly planar, with the planes oriented perpendicular to the substrate. Intercalation of an organic dye, DXP, leads to a reversible tilting of the planes, demonstrating the huge potential of these surface-anchored MOFs for the intercalation of large, planar molecules.

Effect of Osmolytes on Pressure‐Induced Unfolding of Proteins: A High‐Pressure SAXS Study

Herein, we explore the effect of different types of osmolytes on the high-pressure stability and tertiary structure of a well-characterized monomeric protein, staphylococcal nuclease (SNase). Changes in the denaturation pressure and the radius of gyration are obtained in the presence of different concentrations of trimethylamine N-oxide (TMAO), glycerol and urea. To reveal structural changes in the protein upon compression at various osmolyte conditions, small-angle X-ray scattering (SAXS) experiments were carried out. To this end, a new high-pressure cell suitable for high-precision SAXS studies at synchrotron sources was built, which allows one to carry out scattering experiments up to maximum pressures of about 7 kbar. Our data clearly indicate that the osmolytes that stabilize proteins against temperature-induced unfolding drastically increase their pressure stability and that the elliptically shaped curve of the pressure-temperature-stability diagram of proteins is shifted to higher temperatures and pressures with increasing osmolyte concentration. A drastic stabilization is observed for the osmolyte TMAO, which exhibits not only a significant stabilization against temperature-induced unfolding, but also a particularly strong stabilization of the protein against pressure. In fact, such findings are in accordance with in vivo studies (for example P. J. Yancey, J. Exp. Biol. 2005, 208, 2819-2830), where unusually high TMAO concentrations in some deep-sea animals were found. Conversely, chaotropic agents such as urea have a strong destabilizing effect on both the temperature and pressure stability of the protein. Our data also indicate that sufficiently high TMAO concentrations might be able to largely offset the destabilizing effect of urea. The different scenarios observed are discussed in the context of recent experimental and theoretical studies.

The carbon dioxide-water interface at conditions of gas hydrate formation.

The structure of the carbon dioxide-water interface was analyzed by X-ray diffraction and reflectivity at temperature and pressure conditions which allow the formation of gas hydrate. The water-gaseous CO2 and the water-liquid CO2 interface were examined. The two interfaces show a very different behavior with respect to the formation of gas hydrate. While the liquid-gas interface exhibits the formation of thin liquid CO2 layers on the water surface, the formation of small clusters of gas hydrate was observed at the liquid-liquid interface. The data obtained from both interfaces points to a gas hydrate formation process which may be explained by the so-called local structuring hypothesis.

The new diffractometer for surface X-ray diffraction at beamline BL9 of DELTA.

The experimental endstation of the hard X-ray beamline BL9 of the Dortmund Electron Accelerator is equipped with a Huber six-circle diffractometer. It is dedicated to grazing-incidence X-ray diffraction and X-ray reflectivity experiments on solid surfaces and thin films as well as to powder diffraction measurements. A new set-up for grazing-incidence X-ray scattering of liquids has been built up using a silicon mirror to reflect the incident X-ray to the liquid surface at angles of incidence around the critical angle of total reflection of the sample. X-ray reflectivity measurements of a polymer film and grazing-incidence X-ray diffraction measurements of an epitaxically grown Gd40Y60 film, an oxidized surface of Fe-15at.%Al alloy and aqueous salt solutions are presented and discussed.

Stress‐Induced Stabilization of Crystals in Shape Memory Natural Rubber

In contrast to all known shape memory polymers, the melting temperature of crystals in shape memory natural rubber (SMNR) can be greatly manipulated by the application of external mechanical stress. As shown previously, stress perpendicular to the prior programming direction decreases the melting temperature by up to 40 K. In this study, we investigated the influence of mechanical stress parallel to prior stretching direction during programming on the stability of the elongation-stabilizing crystals. It was found that parallel stress stabilizes the crystals, which is indicated by linear increase of the trigger temperature by up to 17 K. The crystal melting temperature can be increased up to 126.5 °C under constrained conditions as shown by X-ray diffraction measurements.

The small-angle and wide-angle X-ray scattering set-up at beamline BL9 of DELTA.

The multi-purpose experimental endstation of beamline BL9 at the Dortmund Electron Accelerator (DELTA) is dedicated to diffraction experiments in grazing-incidence geometry, reflectivity and powder diffraction measurements. Moreover, fluorescence analysis and inelastic X-ray scattering experiments can be performed. Recently, a new set-up for small-angle and wide-angle X-ray scattering utilizing detection by means of an image-plate scanner was installed and is described in detail here. First small-angle X-ray scattering experiments on aqueous solutions of lysozyme with different cosolvents and of staphylococcal nuclease are discussed. The application of the set-up for texture analysis is emphasized and a study of the crystallographic texture of natural bio-nanocomposites, using lobster and crab cuticles as model materials, is presented.

Subsurface influence on the structure of protein adsorbates as revealed by in situ X-ray reflectivity.

The adsorption process of proteins to surfaces is governed by the mutual interactions among proteins, the solution, and the substrate. Interactions arising from the substrate are usually attributed to the uppermost atomic layer. This actual surface defines the surface chemistry and hence steric and electrostatic interactions. For a comprehensive understanding, however, the interactions arising from the bulk material also have to be considered. Our protein adsorption experiments with globular proteins (α-amylase, bovine serum albumin, and lysozyme) clearly reveal the influence of the subsurface material via van der Waals forces. Here, a set of functionalized silicon wafers enables a distinction between the effects of surface chemistry and the subsurface composition of the substrate. Whereas the surface chemistry controls whether the individual proteins are denatured, the strength of the van der Waals forces affects the final layer density and hence the adsorbed amount of proteins. The results imply that van der Waals forces mainly influence surface processes, which govern the structure formation of the protein adsorbates, such as surface diffusion and spreading.

Multiple phase-transitions upon selective CO2 adsorption in an alkyl ether functionalized metal–organic framework—an in situ X-ray diffraction study

The flexible alkyl ether functionalized metal–organic framework [Zn2(BME-bdc)2(dabco)]n (BME-bdc = 2,5-bis(2-methoxyethoxy)-1,4-benzenedicarboxylate, dabco = 1,4-diazabicyclo[2.2.2]octane) shows remarkable structural changes upon selective adsorption of CO2 as determined by in situ X-ray diffraction at 195 K. Upon accommodation of carbon dioxide [Zn2(BME-bdc)2(dabco)]n transfers from a narrow pore form to an open pore form, which exhibits a much higher unit cell volume. Due to the slow adsorption kinetics an unexpected metastable intermediate form could be identified.

Exploring the interfacial structure of protein adsorbates and the kinetics of protein adsorption: an in situ high-energy X-ray reflectivity study.

The high energy X-ray reflectivity technique has been applied to study the interfacial structure of protein adsorbates and protein adsorption kinetics in situ. For this purpose, the adsorption of lysozyme at the hydrophilic silica-water interface has been chosen as a model system. The structure of adsorbed lysozyme layers was probed for various aqueous solution conditions. The effect of solution pH and lysozyme concentration on the interfacial structure was measured. Monolayer formation was observed for all cases except for the highest concentration. The adsorbed protein layers consist of adsorbed lysozyme molecules with side-on or end-on orientation. By means of time-dependent X-ray reflectivity scans, the time-evolution of adsorbed proteins was monitored as well. The results of this study demonstrate the capabilities of in situ X-ray reflectivity experiments on protein adsorbates. The great advantages of this method are the broad wave vector range available and the high time resolution.