Christine Achten

Native polycyclic aromatic hydrocarbons (PAH) in coals - A hardly recognized source of environmental contamination

Numerous environmental polycyclic aromatic hydrocarbon (PAH) sources have been reported in literature, however, unburnt hard coal/ bituminous coal is considered only rarely. It can carry native PAH concentrations up to hundreds, in some cases, thousands of mg/kg. The molecular structures of extractable compounds from hard coals consist mostly of 2-6 polyaromatic condensed rings, linked by ether or methylene bridges carrying methyl and phenol side chains. The extractable phase may be released to the aquatic environment, be available to organisms, and thus be an important PAH source. PAH concentrations and patterns in coals depend on the original organic matter type, as well as temperature and pressure conditions during coalification. The environmental impact of native unburnt coal-bound PAH in soils and sediments is not well studied, and an exact source apportionment is hardly possible. In this paper, we review the current state of the art.

Time to Say Goodbye to the 16 EPA PAHs? Toward an Up-to-Date Use of PACs for Environmental Purposes

The 16 EPA PAHs have played an exceptionally large role above all in environmental and analytical sciences in the last 40 years, but now there are good reasons to question their utility in many circumstances even though their use is so established and comfortable. Here we review the reasons why the list has been so successful and why sometimes it is seen as less relevant. Three groups of polycyclic aromatic compounds (PAC) are missing: larger and highly relevant PAHs, alkylated PACs, and compounds containing heteroatoms. Attempts to improve the situation for certain matrixes are known and here: (1) an updated list of PAHs (including the 16 EPA PAHs) for the evaluation of the toxicity in the environment (40 EnvPAHs); (2) a list of 23 NSO-heterocyclic compounds and 6 heterocyclic metabolites; and (3) lists of 10 oxy-PAHs and 10 nitro-PAHs are proposed for practical use in the future. A discussion in the scientific community about these lists is invited. Although the state of knowledge has improved dramatically since the introduction of the 16 EPA PAHs in the 1970s, this summary also shows that more research is needed about the toxicity, occurrence in the environment and chemical analysis, particularly of alkylated PAHs, higher molecular weight PAHs and substituted PACs such as amino-PAHs, cyano-PAHs, etc.. We also suggest that a long overdue discussion of an update of regulatory environmental PAH analysis is initiated.

Identification of carbonaceous geosorbents for PAHs by organic petrography in river floodplain soils

Organic petrographic analysis was applied to provide direct information on carbonaceous geosorbents for PAHs in river floodplain soils. The anthropogenic OM group (primarily coal and coal-derived particles) displayed large volume amounts for all the soil samples. Distinct PAH concentrations with similar PAH distribution patterns were determined in grain size and density fractions for each sample. Two-ring PAHs had stronger correlation to organic carbon (OC) than black carbon (BC) contents, while heavier PAHs showed correlation to BC, rather than OC. In this study, we combined grain size and density separation, PAH determinations, TOC and BC measurements, and organic petrographic identification, and concluded that two-ring PAHs in soils were associated to coal particles. Other heavier PAHs could be more controlled by black carbon (BC), which were mostly coal-derived particles from former coal mining and coal industrial activity.

Overview of Polycyclic Aromatic Compounds (PAC)

The chemical group of polycyclic aromatic compounds (PAC), including the better-known subgroup of polycyclic aromatic hydrocarbons (PAH) and the heterocyclic aromatic compounds (NSO-PAC, heterocycles), comprise several thousand individual compounds. It is hard to find a comprehensive overview in the literature of these PACs that includes a substantial amount of relevant properties. Here an attempt is made to summarize the most studied but also some less well-known PACs. In addition to basic data such as recommended names, abbreviations, CAS numbers, molecular formulas, chemical structures, and exact mono-isotopic molecular weights, physico-chemical properties taken from the literature like boiling points, vapor pressures, water solubilities, Henrys Law constants, n-octanol-water partition coefficients (log KOW), and pKa are summarized. Selected toxicological data are listed indicating carcinogenic and mutagenic activity or effects on different organisms. PAC nomenclature is a complex topic, so suggestions for practical use are made. Regarding available data, estimated (instead of measured) values should be used with caution because considerable deviations from experimentally determined values can occur. For an enhanced understanding of the behavior of single PACs in comparison with each other, some of the properties mentioned above are plotted vs. the number of rings or the degree of alkylation. Also, some physico-chemical data are correlated with different functional groups as substituents of the PAHs. This article reveals that rather little is known about the less common PACs, e.g., higher molecular weight compounds, alkylated or otherwise substituted aromatics, for instance, keto-, oxo-, amino-, nitro-, cyano-PAHs, or some heterocyclic aromatic compounds, including their derivatives. It mirrors the limited state of knowledge about the variety of PACs that do not belong to the 16 EPA PAHs.

Variations in concentrations and compositions of polycyclic aromatic hydrocarbons (PAHs) in coals related to the coal rank and origin.

The release of unburnt coal particles and associated polycyclic aromatic hydrocarbons (PAHs) may cause adverse impacts on the environment. This study assessed variations in the concentration and composition of PAHs in a set of fifty coal samples from eleven coal basins worldwide. The maximum PAH concentrations at high volatile bituminous rank were recorded in samples from a single basin. Considering the entire sample set, the highest PAH concentrations were in fact found outside of this rank range, suggesting that the maceral composition and thus the coals origin also influenced PAH concentrations. The examination of the PAH compositions revealed that alkylated 2-3 ring PAHs remain dominant compounds irrespective of coal rank or origin. Multivariate analysis based on PAH and maceral content, bulk and maturity parameters allowed the recognition of seven groups with different rank and origin within the coal sample set.

Limited waterborne acute toxicity of native polycyclic aromatic compounds from coals of different types compared to their total hazard potential.

Coals contain native polycyclic aromatic compounds (PACs), which include polycyclic aromatic hydrocarbons (PAHs), and heterocyclic aromatic compounds (NSO-PACs) in considerably varying amounts up to 2500 mg/kg. Whereas PAC bioavailability and toxicity from coals are generally considered to be low, few studies have considered potential variations arising from the composition of different coal types including native PAC content. In the present study, fine particles of different coal types exhibiting variable properties were systematically investigated regarding their PAC bioavailability. PAH content reached up to 79 mg/kg EPA-PAH and 865 mg/kg total PAH. Determination of the toxic potential of extracted PACs in bioassays showed inhibition of Caenorhabditis elegans reproduction (up to 94%) and increased mortality of Danio rerio embryos (up to 100%) after exposure to extracts from lignite, sub-bituminous, and bituminous coals. Anthracite extracts showed no effects. Contact assays using whole coal samples revealed no toxicity to D. rerio embryos in any of the coal samples, suggesting low bioavailability of PACs. In contrast, C. elegans reproduction was inhibited by direct coal contact; however, the observed toxicity probably resulted from other coal effects. The results suggest that despite the high toxic potential of PACs present, their bioavailability from different coal types is very limited and independent of coal properties and native PAH content.

The lack of microbial degradation of polycyclic aromatic hydrocarbons from coal-rich soils.

Analytical techniques used to assess the environmental risk of contamination from polycyclic aromatic hydrocarbons (PAHs) typically consider only abiotic sample parameters. Supercritical fluid extraction and sorption enthalpy experiments previously suggested slow desorption rates for PAH compounds in two coal-contaminated floodplain soils. In this study, the actual PAH availability for aerobic soil microorganisms was tested in two series of soil-slurry experiments. The experimental conditions supported microbial degradation of phenanthrene if it was weakly sorbed onto silica gel. Native coals and coal-derived particles in two soils effectively acted as very strong sorbents and prevented microbial PAH degradation. The long history of PAH exposure and degree of coal contamination apparently had no influence on the capability of the microbial soil community to overcome constraints of PAH availability. Within the context of the experimental conditions and the compounds chosen, our results confirm that coal-bound PAHs are not bioavailable and hence of low environmental concern.

Polar polycyclic aromatic compounds from different coal types show varying mutagenic potential, EROD induction and bioavailability depending on coal rank.

Investigations of the bioavailability and toxicity of polycyclic aromatic compounds (PAC) have rarely considered the heterogeneity of coals and the impact of more polar PAC besides polycyclic aromatic hydrocarbons (PAH). Earlier, we investigated the toxicity of eight heterogeneous coals and their extracts. In the present study, the hazard potential with respect to mechanism-specific toxicity of polar fractions of dichloromethane extracts from coals was studied. Polar extract fractions of all coal types except for anthracite induced EROD activity (determined in RTL-W1 cells), independent of coal type (Bio-TEQs between 23 ± 16 and 52 ± 22 ng/g). The polar fractions of all bituminous coal extracts revealed mutagenic activity (determined using the Ames Fluctuation test). No significant mutation induction was detected for the polar extract fractions from the lignite, sub-bituminous coal and anthracite samples, which indicates a higher dependency on coal type for polar PAC here. Additionally, information on bioavailability was derived from a bioaccumulation test using the deposit-feeding oligochaete Lumbriculus variegatus which was exposed for 28 days to ground coal samples. Despite the high toxic potential of most coal extracts and a reduced biomass of Lumbriculus in bituminous coal samples, bioaccumulation of PAH and mortality after 28 days were found to be low. Limited bioaccumulation of PAH (up to 3.6 ± 3.8 mg/kg EPA-PAH) and polar PAC were observed for all coal samples. A significant reduction of Lumbriculus biomass was observed in the treatments containing bituminous coals (from 0.019 ± 0.004 g to 0.046 ± 0.011 g compared to 0.080 ± 0.025 g per replicate in control treatments). We conclude that bioavailability of native PAC from coals including polar PAC is low for all investigated coal types. In comparison to lignite, sub-bituminous coals and anthracite, the bioavailability of PAC from bituminous coals is slightly increased.

Accelerated benzene polycarboxylic acid analysis by liquid chromatography–time-of-flight–mass spectrometry for the determination of petrogenic and pyrogenic carbon

Pyrogenic carbon species are of particular interest due to their ubiquitous occurrence in the environment and their high sorption capacities for nonpolar organic compounds. It has recently been shown that the analysis of the molecular markers for complex aromatic carbon structures, benzene polycarboxylic acids (BPCA), has a high potential for aid in the identification of different carbon sources. In this study, the first LC method using mass spectrometry (MS) for reliable and accelerated (<24h) quantification of pyrogenic and petrogenic carbon by BPCA analysis has been developed. The main advantage of LC-MS compared to previous methods is the higher sensitivity, which is important if only small sample amounts are available. Sample pre-treatment could be reduced to a minimum. Deuterated phthalic acid was introduced as internal standard due to its structural similarity to BPCA and its lack of occurrence in the environment. Linear quantification with r2≥0997 was accomplished for all BPCA. Method validation showed an excellent quantification reproducibility (mean CV<5%) which is comparable to LC-DAD methods and more reliable than GC-FID measurements (CV 16-23%). In summary, the presented BPCA method is more economic, efficient and presumably attractive to use. Besides reference materials, various pyrogenic and petrogenic samples were analyzed to test if the sources were indicated by BPCA analysis. In addition to pyrogenic carbon, large amounts of petrogenic carbon species can also be present in urban soils and river sediments, especially in mining regions. They also to a large degree consist of aromatic carbon structures and therefore have an impact on source identification by BPCA analysis. Comparison of petrogenic and pyrogenic carbon samples shows similarities in the BPCA concentrations and patterns, in their aromaticity and degree of aromatic condensation. Thus, a differentiation between petrogenic and pyrogenic carbon only by BPCA analysis of samples with unknown carbon sources is not possible. For reliable source identification of the carbon species, the combination with other methods, such as e. g. analysis of polycyclic aromatic hydrocarbons may be successful.

Toward Streamlined Identification of Dioxin-like Compounds in Environmental Samples through Integration of Suspension Bioassay

Effect-directed analysis (EDA) is a powerful strategy to identify biologically active compounds in environmental samples. However, in current EDA studies, fractionation and handling procedures are laborious, consist of multiple evaporation steps, and thus bear the risk of contamination and decreased recoveries of the target compounds. The low resulting throughput has been one of the major bottlenecks of EDA. Here, we propose a high-throughput EDA (HT-EDA) work-flow combining reversed phase high-performance liquid chromatography fractionation of samples into 96-well microplates, followed by toxicity assessment in the micro-EROD bioassay with the wild-type rat hepatoma H4IIE cells, and chemical analysis of bioactive fractions. The approach was evaluated using single substances, binary mixtures, and extracts of sediment samples collected at the Three Gorges Reservoir, Yangtze River, China, as well as the rivers Rhine and Elbe, Germany. Selected bioactive fractions were analyzed by highly sensitive gas chromatography-atmospheric pressure laser ionization-time-of-flight-mass spectrometry. In addition, we optimized the work-flow by seeding previously adapted suspension-cultured H4IIE cells directly into the microplate used for fractionation, which makes any transfers of fractionated samples unnecessary. The proposed HT-EDA work-flow simplifies the procedure for wider application in ecotoxicology and environmental routine programs.