Christof Christophis

Coherent imaging of biological samples with femtosecond pulses at the free-electron laser FLASH

Coherent x-ray imaging represents a new window to imaging non- crystalline, biological specimens at unprecedented resolutions. The advent of free-electron lasers (FEL) allows extremely high flux densities to be delivered to a specimen resulting in stronger scattered signal from these samples to be measured. In the best case scenario, the diffraction pattern is measured before the sample is destroyed by these intense pulses, as the processes involved in radiation damage may be substantially slower than the pulse duration. In this case, the scattered signal can be interpreted and reconstructed to yield a faithful image of the sample at a resolution beyond the conventional radiation damage limit. We employ coherent x-ray diffraction imaging (CXDI) using the free-electron

The Biocompatibility of Metal–Organic Framework Coatings: An Investigation on the Stability of SURMOFs with Regard to Water and Selected Cell Culture Media

Highly porous thin films based on a [Cu(bdc)(2)](n) (bdc = benzene-1,4-dicarboxylic acid) metal-organic framework, MOF, grown using liquid-phase epitaxy (LPE) show remarkable stability in pure water as well as in artificial seawater. This opens the possibility to use these highly porous coatings for environmental and life science applications. Here we characterize in detail the stability of these SURMOF 2 thin films under aqueous and cell culture conditions. We find that the material degrades only very slowly in water and artificial seawater (ASW) whereas in typical cell culture media (PBS and DMEM) a rapid dissolution is observed. The release of Cu(2+) ions resulting from the dissolution of the SURMOF 2 in the liquids exhibits no adverse effect on the adhesion of fibroblasts, prototype eukaryotic cells, to the substrate and their subsequent proliferation, thus demonstrating the biocompatibility of SURMOF 2 surface coatings. Thus, the results are an important step toward application of these porous materials as a slow release matrix, for example, for pharmaceuticals and growth factors.

X-ray holographic microscopy with zone plates applied to biological samples in the water window using 3rd harmonic radiation from the free-electron laser FLASH

The imaging of hydrated biological samples - especially in the energy window of 284-540 eV, where water does not obscure the signal of soft organic matter and biologically relevant elements - is of tremendous interest for life sciences. Free-electron lasers can provide highly intense and coherent pulses, which allow single pulse imaging to overcome resolution limits set by radiation damage. One current challenge is to match both the desired energy and the intensity of the light source. We present the first images of dehydrated biological material acquired with 3rd harmonic radiation from FLASH by digital in-line zone plate holography as one step towards the vision of imaging hydrated biological material with photons in the water window. We also demonstrate the first application of ultrathin molecular sheets as suitable substrates for future free-electron laser experiments with biological samples in the form of a rat fibroblast cell and marine biofouling bacteria Cobetia marina.

Digital In-line Holography with femtosecond VUV radiation provided by the free-electron laser FLASH

Femtosecond vacuum ultraviolet (VUV) radiation provided by the free-electron laser FLASH was used for digital in-line holographic microscopy and applied to image particles, diatoms and critical point dried fibroblast cells. To realize the classical in-line Gabor geometry, a 1 microm pinhole was used as spatial filter to generate a divergent light cone with excellent pointing stability. At a fundamental wavelength of 8 nm test objects such as particles and diatoms were imaged at a spatial resolution of 620 nm. In order to demonstrate the applicability to biologically relevant systems, critical point dried rat embryonic fibroblast cells were for the first time imaged with free-electron laser radiation.

Microfluidic Assay to Quantify the Adhesion of Marine Bacteria

For both, environmental and medical applications, the quantification of bacterial adhesion is of major importance to understand and support the development of new materials. For marine applications, the demand is driven by the quest for improved fouling-release coatings. To determine the attachment strength of bacteria to coatings, a microfluidic adhesion assay has been developed which allows probing at which critical wall shear stress bacteria are removed from the surface. Besides the experimental setup and the optimization of the assay, we measured adhesion of the marine bacterium Cobetia marina on a series of differently terminated self-assembled monolayers. The results showed that the adhesion strength of C. marina changes with surface chemistry. The difference in critical shear stress needed to remove bacteria can vary by more than one order of magnitude if a hydrophobic material is compared to an inert chemistry such as polyethylene glycol.

Digital in-line X-ray holography with zone plates

Single pulse imaging with radiation provided by free-electron laser sources is a promising approach towards X-ray microscopy, which is expected to provide high resolution images of biological samples unaffected by radiation damage. One fully coherent imaging technique for this purpose is digital in-line holography. Key to its successful application is the creation of X-ray point sources with high photon flux. In this study we applied zone plates to create such point sources with synchrotron radiation provided by the storage ring BESSY II. The obtained, divergent light cone is applied to holographic microscopy of biological objects such as critical point dried Navicula perminuta diatoms and human cells using photons with an energy of 250 eV. Compared to conventional experiments employing pinholes, exposure times are reduced by two orders of magnitude.

Differences between healthy hematopoietic progenitors and leukemia cells with respect to CD44 mediated rolling versus adherence behavior on hyaluronic acid coated surfaces

We previously demonstrated that leukemia cell lines expressing CD44 and hematopoietic progenitor cells (HPC) from umbilical cord blood (CB) showed rolling on hyaluronic acid (HA)-coated surfaces under physiological shear stress. In the present study, we quantitatively assessed the interaction of HPC derived from CB, mobilized peripheral blood (mPB) and bone marrow (BM) from healthy donors, as well as primary leukemia blasts from PB and BM of patients with acute myeloid leukemia (AML) with HA. We have demonstrated that HPC derived from healthy donors showed relative homogeneous rolling and adhesion to HA. In contrast, highly diverse behavioral patterns were found for leukemia blasts under identical conditions. The monoclonal CD44 antibody (clone BU52) abrogated the shear stress-induced rolling of HPC and leukemia blasts, confirming the significance of CD44 in this context. On the other hand, the immobile adhesion of leukemia blasts to the HA-coated surface was, in some cases, not or incompletely inhibited by BU52. The latter property was associated with non-responsiveness to induction chemotherapy and subsequently poor clinical outcome.

Adherent cells avoid polarization gradients on periodically poled LiTaO3 ferroelectrics

The response of fibroblast cells to periodically poled LiTaO3 ferroelectric crystals has been studied. While fibroblast cells do not show morphological differences on the two polarization directions, they show a tendency to avoid the field gradients that occur between polarization domains of the ferroelectric. The response to the field gradients is fully established after one hour, a time at which fibroblasts form their first focal contacts. If suspension cells, with a lower tendency to establish strong surface contacts are used, no influence of the field gradients is observed.

Fibroblast adhesion on unidirectional polymeric nanofilms

Nanotextured polymeric surfaces with inclined rods reveal highly anisotropic properties concerning wetting and adhesion. In this work, we report on the interaction of fibroblast cells with these highly anisotropic materials. The authors quantified removal of adherent cells from such surfaces by a laminar flow. The critical shear force needed for cell removal from the surface depends on the inclination direction. Based on electron microscopy cross sections we deduce that interactions of cellular filopodia extending into the nanotextured surface are causing the direction depending removal.