Christoph Vannahme

Integrated Optical Devices in Lithium Niobate

Lithium niobate offers incredible versatility as a substrate for integrated optics. Researchers have developed an array of new optical devices based on this material, including waveguide structures, electro-optical wavelength filters and polarization controllers, lasers with remarkable properties, nonlinear frequency converters of exceptional efficiency, ultrafast all-optical signal processing devices and single photon sources.

Plasmonic colour laser printing

Colour generation by plasmonic nanostructures and metasurfaces has several advantages over dye technology: reduced pixel area, sub-wavelength resolution and the production of bright and non-fading colours. However, plasmonic colour patterns need to be pre-designed and printed either by e-beam lithography (EBL) or focused ion beam (FIB), both expensive and not scalable processes that are not suitable for post-processing customization. Here we show a method of colour printing on nanoimprinted plasmonic metasurfaces using laser post-writing. Laser pulses induce transient local heat generation that leads to melting and reshaping of the imprinted nanostructures. Depending on the laser pulse energy density, different surface morphologies that support different plasmonic resonances leading to different colour appearances can be created. Using this technique we can print all primary colours with a speed of 1 ns per pixel, resolution up to 127,000 dots per inch (DPI) and power consumption down to 0.3 nJ per pixel.

High-Q conical polymeric microcavities

We report on the fabrication of high-Q microresonators made of low-loss, thermoplastic polymer poly(methyl methacrylate) (PMMA) directly processed on a silicon substrate. Using this polymer-on-silicon material in combination with a thermal reflow step enables cavities of conical geometry with an ultrasmooth surface. The cavity Q factor of these PMMA resonators is above 2×106 in the 1300 nm wavelength range. Finite element simulations show the existence of a variety of “whispering gallery” modes in these resonators explaining the complexity of the measured transmission spectra.

Lipid multilayer gratings

The interaction of electromagnetic waves with matter can be controlled by structuring the matter on the scale of the wavelength of light, and various photonic components have been made by structuring materials using top-down or bottom-up approaches. Dip-pen nanolithography is a scanning-probe-based fabrication technique that can be used to deposit materials on surfaces with high resolution and, when carried out in parallel, with high throughput. Here, we show that lyotropic optical diffraction gratings--composed of biofunctional lipid multilayers with controllable heights between approximately 5 and 100 nm--can be fabricated by lipid dip-pen nanolithography. Multiple materials can be simultaneously written into arbitrary patterns on pre-structured surfaces to generate complex structures and devices, allowing nanostructures to be interfaced by combinations of top-down and bottom-up fabrication methods. We also show that fluid and biocompatible lipid multilayer gratings allow label-free and specific detection of lipid-protein interactions in solution. This biosensing capability takes advantage of the adhesion properties of the phospholipid superstructures and the changes in the size and shape of the grating elements that take place in response to analyte binding.

Plastic lab-on-a-chip for fluorescence excitation with integrated organic semiconductor lasers

Laser light excitation of fluorescent markers offers highly sensitive and specific analysis for bio-medical or chemical analysis. To profit from these advantages for applications in the field or at the point-of-care, a plastic lab-on-a-chip with integrated organic semiconductor lasers is presented here. First order distributed feedback lasers based on the organic semiconductor tris(8-hydroxyquinoline) aluminum (Alq3) doped with the laser dye 4-dicyanomethylene-2-methyl-6-(p-dimethylaminostyril)-4H-pyrane (DCM), deep ultraviolet induced waveguides, and a nanostructured microfluidic channel are integrated into a poly(methyl methacrylate) (PMMA) substrate. A simple and parallel fabrication process is used comprising thermal imprint, DUV exposure, evaporation of the laser material, and sealing by thermal bonding. The excitation of two fluorescent marker model systems including labeled antibodies with light emitted by integrated lasers is demonstrated.

Continuously tunable solution-processed organic semiconductor DFB lasers pumped by laser diode

The fabrication and characterization of continuously tunable, solution-processed distributed feedback (DFB) lasers in the visible regime is reported. Continuous thin film thickness gradients were achieved by means of horizontal dipping of several conjugated polymer and blended small molecule solutions on cm-scale surface gratings of different periods. We report optically pumped continuously tunable laser emission of 13 nm in the blue, 16 nm in the green and 19 nm in the red spectral region on a single chip respectively. Tuning behavior can be described with the Bragg-equation and the measured thickness profile. The laser threshold is low enough that inexpensive laser diodes can be used as pump sources.

Low-threshold conical microcavity dye lasers

We report on lasing in rhodamine 6G-doped, conical polymeric microcavities with high quality factors fabricated on a silicon substrate. Threshold pump energies as low as 3 nJ are achieved by free-space excitation in the quasistationary pumping regime with lasing wavelengths around 600 nm. Finite element simulations confirm that lasing occurs in whispering gallery modes which corresponds well to the measured multimode laser-emission. The effect of dye concentration on lasing threshold and lasing wavelength is investigated and can be explained using a standard dye laser model.

All-polymer organic semiconductor laser chips: Parallel fabrication and encapsulation

Organic semiconductor lasers are of particular interest as tunable visible laser light sources. For bringing those to market encapsulation is needed to ensure practicable lifetimes. Additionally, fabrication technologies suitable for mass production must be used. We introduce all-polymer chips comprising encapsulated distributed feedback organic semiconductor lasers. Several chips are fabricated in parallel by thermal nanoimprint of the feedback grating on 4″ wafer scale out of poly(methyl methacrylate) (PMMA) and cyclic olefin copolymer (COC). The lasers consisting of the organic semiconductor tris(8-hydroxyquinoline) aluminum (Alq3) doped with the laser dye 4-dicyanomethylene-2-methyl-6-(p-dimethylaminostyril)-4H-pyrane (DCM) are hermetically sealed by thermally bonding a polymer lid. The organic thin film is placed in a basin within the substrate and is not in direct contact to the lid. Thus, the spectral properties of the lasers are unmodified in comparison to unencapsulated lasers. Grating periods of 378 nm to 428 nm in steps of 10 nm result in lasing at wavelengths of 622 nm to 685 nm. The operational lifetime of the lasers expressed in number of pulses is improved 11-fold (PMMA) and 3-fold (COC) in comparison to unencapsulated PMMA devices.

Single-mode biological distributed feedback laser.

Single-mode second order distributed feedback (DFB) lasers of riboflavin (vitamin B2) doped gelatine films on nanostructured low refractive index material are demonstrated. Manufacturing is based on a simple UV nanoimprint and spin-coating. Emission wavelengths of 543 nm and 562 nm for two different grating periods are reported.

Optofluidic dye laser in a foil

First order distributed feedback optofluidic dye lasers embedded in a 350 microm thick TOPAS((R)) foil are demonstrated. They are designed in order to give high output pulse energies. Microfluidic channels and first order distributed feedback gratings are fabricated in parallel by thermal nanoimprint into a 100 microm foil. The channels are closed by thermal bonding with a 250 microm thick foil and filled with 5.10(-3) mol/l Pyrromethene 597 in benzyl alcohol. The fluid forms a liquid core single mode slab waveguide of 1.6 microm height on a nanostructured grating area of 0.5 x 0.5 mm(2). This results in a large gain volume. Two grating periods of 185 nm and 190 nm yield single mode laser light emission at 566 nm and 581 nm respectively. High emitted pulse energies of more than 1 microJ are reported. Stable operation for more than 25 min at 10 Hz pulse repetition rate is achieved.