Christopher C. Perry

Synthesis and catalytic activity of pluronic stabilized silver–gold bimetallic nanoparticles

In this report, we demonstrate a rapid, simple, and green method for synthesizing silver-gold (Ag-Au) bimetallic nanoparticles (BNPs). We used a novel modification to the galvanic replacement reaction by suspending maltose coated silver nanoparticles (NPs) in ≈ 2% aqueous solution of EO100PO65EO100 (Pluronic F127) prior to HAuCl4 addition. The Pluronic F127 stabilizes the BNPs, imparts biocompatibility, and mitigates the toxicity issues associated with other surfactant stabilizers. BNPs with higher Au:Ag ratios and, subsequently, different morphologies were successfully synthesized by increasing the concentration of gold salt added to the Ag NP seeds. These BNPs have enhanced catalytic activities than typically reported for monometallic Au or Ag NPs (∼ 2-10 fold) of comparable sizes in the sodium borohydride reduction of 4-nitrophenol. The 4-nitrophenol reduction rates were highest for partially hollow BNP morphologies.

Fluorescence of commercial Pluronic F127 samples: Temperature-dependent micellization

We present a novel approach of using the butylated hydroxytoluene (BHT) antioxidant found in commercial Pluronic F127 samples as a marker of polymer aggregation. The BHT marker was compared to the pyrene dye and static light scattering methods as a way to measure the critical micelle concentration (CMC) and critical micelle temperature (CMT). The n→π(∗) transitions of BHT are sensitive to the microenvironment as demonstrated by plotting the fractional intensities of its excitation (≈280nm) and emission (≈325nm) peaks. BHT is more sensitive to changes in temperature than concentration. The partition coefficient increases ≈40-fold for pyrene compared to ≈2-fold for BHT when the temperature is increased from 25 to 37°C. CMT values determined using the BHT fluorescence decrease with increasing F127 concentration. Our results show that BHT can be used as a reliable marker of changes in the microenvironment of Pluronic F127.

The influence of hydroxide on the initial stages of anodic growth of TiO2 nanotubular arrays

Understanding the mechanism for growing TiO(2) nanotubes is important for controlling the nanostructures. The hydroxide nano-islands on the Ti surface play a significant role at the initial stage of anodization by forming the very first nano-pores at the interface between hydroxide islands and substrate and eliminating the H(2)O electrolysis. A quantitative time dependent SEM study has revealed a nanotube growth process with an initial linear increase of pore diameter, film thickness and number of pores. During the anodization of titanium, different current transient curves are observed for Ti samples with or without hydroxide on the surface. The transient current profile has been quantitatively analyzed by fitting several distinctive stages based on a growth mechanism supported by SEM observations. It is found that a saturated cubic dependent equation is appropriate to fit a short current upturn due to the increase of the surface area.

Role of vimA in cell surface biogenesis in Porphyromonas gingivalis

The Porphyromonas gingivalis vimA gene has been previously shown to play a significant role in the biogenesis of gingipains. Further, in P. gingivalis FLL92, a vimA-defective mutant, there was increased auto-aggregation, suggesting alteration in membrane surface proteins. In order to determine the role of the VimA protein in cell surface biogenesis, the surface morphology of P. gingivalis FLL92 was further characterized. Transmission electron microscopy demonstrated abundant fimbrial appendages and a less well defined and irregular capsule in FLL92 compared with the wild-type. In addition, atomic force microscopy showed that the wild-type had a smoother surface compared with FLL92. Western blot analysis using anti-FimA antibodies showed a 41 kDa immunoreactive protein band in P. gingivalis FLL92 which was missing in the wild-type P. gingivalis W83 strain. There was increased sensitivity to globomycin and vancomycin in FLL92 compared with the wild-type. Outer membrane fractions from FLL92 had a modified lectin-binding profile. Furthermore, in contrast with the wild-type strain, nine proteins were missing from the outer membrane fraction of FLL92, while 20 proteins present in that fraction from FLL92 were missing in the wild-type strain. Taken together, these results suggest that the VimA protein affects capsular synthesis and fimbrial phenotypic expression, and plays a role in the glycosylation and anchorage of several surface proteins.

Characterization of condensed plasmid DNA models for studying the direct effect of ionizing radiation.

We have examined the changes in physical properties of aqueous solutions of the plasmid pUC18 that take place on the addition of the cationic oligopeptide penta-arginine. An increase in sedimentation rate and static light scattering, and changes in the nucleic acid CD spectrum all suggest that this ligand acts to condense the plasmid. Dynamic light scattering suggests the hydrodynamic radii of the condensate particles are a few micrometers, ca. 50-fold larger than that of the monomeric plasmid. Condensation of the plasmid also produces a ca. 100-fold decrease in the strand break yield produced by gamma irradiation. This extensive protection against reactive intermediates in the bulk of the solution implies that condensed plasmid DNA may offer a model system with which to study the direct effect of ionizing radiation (ionization of the DNA itself). The use of peptide ligands as condensing agents in this application is attractive because the derivatives of several amino acids (particularly tryptophan and tyrosine) have been shown to modify the radiation chemistry of DNA extensively.

Use of a coumarin-labeled hexa-arginine peptide as a fluorescent hydroxyl radical probe in a nanoparticulate plasmid DNA condensate.

Coumarin derivatives have found application as probes for the hydroxyl radical because one of the products of the reaction between them is a highly fluorescent umbelliferone. We have examined the interaction in aqueous solution between a cationic coumarin-labeled hexa-arginine peptide ligand and plasmid DNA, and compared after gamma irradiation the yields of products derived from both of them. At low ionic strengths, the ligand binds very tightly to the plasmid. Compared with the structurally similar 4-methylumbelliferone (phenolic pK(a) = 7.8), the fluorescent product derived from gamma irradiation of the coumarin labeled cationic peptide is significantly more acidic (pK(a) = 6.1), making it a very convenient probe for solutions of pH in the physiological range. The yield of this product is generally in excellent agreement over a wide range of conditions with that of the single strand break product produced by the reaction of the hydroxyl radical with the plasmid. Thus coumarin-labeled peptide ligands offer promise as hydroxyl radical probes for locations in close proximity to DNA.

Characterization of a lipophilic plasmid DNA condensate formed with a cationic peptide fatty acid conjugate.

In the presence of cationic ligands, DNA molecules can become aggregated into larger particles in a process known as condensation. DNA condensates are of interest as models for the dense packing found in naturally occurring structures such as phage heads and chromatin. They have found extensive application in DNA transfection and also provide convenient models with which to study DNA damage by the direct effect of ionizing radiation. Further, conjugates of cationic peptides with fatty acids may represent a class of attractive ligands for these areas because of their simple synthesis. When plasmid pUC18 is used as the DNA target and N-caproyl-penta-arginine amide (Cap-R(5)-NH(2)) is used as the ligand, the physical properties of the resulting mixtures were characterized using static and dynamic light scattering, sedimentation, dye exclusion, circular dichroism, nanoparticle tracking, and atomic force microscopy. Their chemical properties were assayed using solvent extraction and protection against hydroxyl radical attack and nuclease digestion. Titration of the plasmid with the Cap-R(5)-NH(2) ligand produced sharply defined changes in both chemical and physical properties, which was associated with the formation of condensed DNA particles in the 100-2000 nm size range. The caproyl group at the ligands N-terminus produced a large increase in the partitioning of the resulting condensate from water into chloroform and in its binding to the neutral detergent Pluronic F-127. Both the physical and chemical data were all consistent with condensation of the plasmid by the ligand where the presence in the ligand of the caproyl group conferred an extensive lipophilic character upon the condensate.

Modeling the Influence of Histone Proteins on the Sensitivity of DNA to Ionizing Radiation

The DNA-binding proteins that are present in chromatin significantly affect the sensitivity of cells to ionizing radiation and to the radiation chemistry of DNA damage. The interaction between protein and DNA modifies the radiation chemistry of the latter. To model these processes, we have examined the effects of ionizing radiation on the minichromosome form of SV40 (which contains histone proteins arranged in nucleosomes) and also on plasmid DNA in the presence of lysozyme. Although high concentrations of lysozyme can bring about an extensive radioprotection by condensation of the plasmid, at lower levels it still produces significant radioprotective effects under conditions where this associative phase separation does not take place. The presence of histones or of lysozyme decreases the yield of modified guanines produced by ionizing radiation. Comparison with previous observations made with oligopeptides suggests that the mechanism responsible is electron donation to guanyl radicals in the DNA by tryptophan and tyrosine residues in the proteins. However, there was no evidence for DNA-protein crosslink formation.

Mechanistic Investigation of Seeded Growth in Triblock Copolymer Stabilized Gold Nanoparticles

We report the seeded synthesis of gold nanoparticles (GNPs) via the reduction of HAuCl4 by (L31 and F68) triblock copolymer (TBP) mixtures. In the present study, we focused on [TBP]/[Au(III)] ratios of 1-5 (≈1 mM HAuCl4) and seed sizes ~20 nm. Under these conditions, the GNP growth rate is dominated by both the TBP and seed concentrations. With seeding, the final GNP size distributions are bimodal. Increasing the seed concentration (up to ~0.1 nM) decreases the mean particle sizes 10-fold, from ~1000 to 100 nm. The particles in the bimodal distribution are formed by the competitive direct growth in solution and the aggregative growth on the seeds. By monitoring kinetics of GNP growth, we propose that (1) the surface of the GNP seeds embedded in the TBP cavities form catalytic centers for GNP growth and (2) large GNPs are formed by the aggregation of GNP seeds in an autocatalytic growth process.

Electrospinning of poly(methyl methacrylate) nanofibers in a pump-free process

Abstract The effects of processing parameters, including solution concentration, viscosity, nozzle diameter, voltage bias and the nozzle to collector distance, on the morphology and diameters of poly(methyl methacrylate) (PMMA) fibers have been systematically investigated, using a unique pump-free electrospinning method. For PMMA solution concentrations less than the critical entanglement concentration, ce, prolate spheroid-shaped droplets or beads with fibers were formed, whereas at concentrations above ce, good quality bead-free fibers were formed. Quantitative analysis revealed a linear dependence between the solution viscosity and fiber diameter. Larger fiber diameters were achieved by increasing the nozzle diameter and voltage bias. Increasing the bias voltage has the additional effect of broadening the diameter distribution, as a result of splaying and splitting. By contrast, when the strength of the electrical field was reduced by increasing the distance between the nozzle and collector, the overall fiber diameter was reduced.