Christopher McConville

Affect intensity: Factor or artifact?

Abstract The construct of affect intensity is widely used as a measure of the strength with which individuals experience emotion. This construct is inferred from the presence of a large positive correlation between affect intensity measures computed from scales measuring positive and negative affect when these are administered over several days. A serious statistical artifact is reported in the procedure used to compute affect intensity. This is believed to completely invalidate the affect intensity construct. A Monte Carlo study reveals a large correlation between positive and negative affect intensity from data which vary randomly from day to day. Several features of the score distribution are shown to affect the magnitude of these correlations, and it is proposed that affect intensity can be more parsimoniously explained as a mixture of trait neuroticism and extraversion. The affect intensity literature is shown to be consistent with such an explanation.

Development and characterisation of a self-microemulsifying drug delivery systems (SMEDDSs) for the vaginal administration of the antiretroviral UC-781.

UC-781 is highly selective and potent against HIV-1. However, its hydrophobic nature (logP 5.1) and lack of aqueous solubility have limited its development as a HIV microbicide. Self-microemulsifying drug delivery systems (SMEDDSs) have been developed to enhance the water solubility and bioavailability of hydrophobic drugs, such as UC781. In this study, we show the development of UC781-loaded SMEDDS and their enhanced release of UC781 from hard gelatine capsules, when compared to UC781 powder only. The majority of antiretrovirals being evaluated as potential HIV microbicides are hydrophobic. Therefore, a SMEDDS formulation offers an alternative approach to enhancing the vaginal absorption of these microbicidal candidates.

Preparation and characterisation of Kolliphor® P 188 and P 237 solid dispersion oral tablets containing the poorly water soluble drug disulfiram.

The oral route of administration is the most common and preferred route of drug delivery due to its ease of administration, cost-effectiveness and flexibility in design. However, limited aqueous solubility of the active pharmaceutical ingredient can result in poor bioavailability, which is a major issue for the pharmaceutical industry. Increasing numbers of new drugs are falling into class II of the Biopharmaceutical Classification System (BCS), where they have a low solubility and high tissue permeability, meaning that bioavailability is solubility dependent. Here we demonstrate the development and characterisation of solid dispersion oral tablets, containing the poorly water-soluble drug disulfiram, prepared using both the hot melt and solvent evaporation methods and manufactured from two different polymers, Kolliphor(®) P 188 and P 237, specifically designed for the manufacture of solid dispersions. This paper demonstrates that the disulfiram solid dispersions tablets have an enhanced release rate of disulfiram compared to the control tablets. The Kolliphor(®) P 188 polymer control tablets released approximately 48.8% of their disulfiram content over 8h, with the solvent evaporated tablets releasing approximately 65.8%, while the 60 and 80 °C hot melt tablets released approximately 73.2 and 100% of their disulfiram content respectively. A similar trend was seen with Kolliphor(®) P 237 as the control tablets released approximately 50.5% of their disulfiram content over 8h, while the solvent evaporated tablets released approximately 79.5% and the 60 and 80 °C hot melt tablets released 100.2 and 100.3% respectively. Depending on what method and polymer is used to manufacture the solid dispersions the disulfiram is either maintained completely or partially in its amorphous state and it is this which enhances its solubility and release rate from the tablets. The disulfiram in the Kolliphor(®) P 188 solvent evaporated and 60 °C hot melt tablets retained 50.5 and 44.1% of its crystallinity, while the disulfiram in the 80 °C hot melt tablets was completely amorphous. Whereas the disulfiram in the Kolliphor(®) P 237 solvent evaporated tablets retained 45.2% crystallinity, while the disulfiram in both of the hot melt tablets was completely in its amorphous form.

Preformulation and Development of a Once-Daily Sustained-Release Tenofovir Vaginal Tablet Tablet Containing A Single Excipient

Tenofovir is a nucleoside reverse-transcriptase inhibitor that is currently being investigated as a potential HIV microbicide candidate, with a recent phase IIb study of a 1% (w/w) tenofovir gel reducing HIV acquisition by 39% in sexually active women. However, not only does a HIV microbicidal product need to be safe and effective, it also needs to be cheap and easy to manufacture. In this study, we report the development of a tenofovir-loaded tablet, manufactured using a single sustained-release polymer, which has an acceptable hardness, friability and tenofovir release rate. Furthermore, by varying both the type and molecular weight of the sustained-release polymer, as well as the particle size of both tenofovir and the sustained-release polymer, we can vary the release rate of tenofovir from the tablets.

Poly lactic-co-glycolic acid controlled delivery of disulfiram to target liver cancer stem-like cells

Disulfiram (DS), an anti-alcoholism drug, shows very strong cytotoxicity in many cancer types. However its clinical application in cancer treatment is limited by the very short half-life in the bloodstream. In this study, we developed a poly lactic-co-glycolic acid (PLGA)-encapsulated DS protecting DS from the degradation in the bloodstream. The newly developed DS-PLGA was characterized. The DS-PLGA has very satisfactory encapsulation efficiency, drug-loading content and controlled release rate in vitro. PLGA encapsulation extended the half-life of DS from shorter than 2 minutes to 7 hours in serum. In combination with copper, DS-PLGA significantly inhibited the liver cancer stem cell population. CI-isobologram showed a remarkable synergistic cytotoxicity between DS-PLGA and 5-FU or sorafenib. It also demonstrated very promising anticancer efficacy and antimetastatic effect in liver cancer mouse model. Both DS and PLGA are FDA approved products for clinical application. Our study may lead to repositioning of DS into liver cancer treatment.

Development and characterisation of sustained release solid dispersion oral tablets containing the poorly water soluble drug disulfiram.

Administration of drugs via the oral route is the most common and preferred route due to its ease of administration, cost-effectiveness and flexibility in design. However, if the drug being administered has limited aqueous solubility it can result in poor bioavailability. Furthermore, the low pH of the stomach as well as enzymatic activity can result in drugs delivered via the oral route being rapidly metabolised and degraded. Here we demonstrate the development and characterisation of sustained release solid dispersion oral tablets, containing the poorly water-soluble drug disulfiram (DSF). The tablets, which are manufactured from two different polymers (Kolliphor(®) P 188 and P 237) specifically designed for the manufacture of solid dispersions and two different polymers (Kollidon(®) SR and HPMC) specifically designed to provide sustained release, can enhance the solubility of DSF, sustain its release, while protecting it from degradation in simulated gastric fluid (SGF). The paper demonstrates that when using the hot melt method at 80°C the DSF loading capacity of the Kolliphor(®) P 188 and P 237 polymers is approximately 43 and 46% respectively, with the DSF completely in an amorphous state. The addition of 80% Kollidon(®) SR to the formulation completely protected the DSF in SGF for up to 70 min with 16% degradation after 120 min, while 75% degradation occurred after 120 min with the addition of 80% HPMC. The release rate of DSF can be manipulated by both the loading and type of sustained release polymer used, with HPMC providing for a much faster release rate compared to Kollidon(®) SR.

Efficacy of Tenofovir 1% Vaginal Gel in Reducing the Risk of HIV-1 and HSV-2 Infection

Human Immunodeficiency Virus (HIV) is a retrovirus that can result in rare opportunistic infections occurring in humans. The onset of these infections is known as Acquired Immune Deficiency Syndrome (AIDS). Sexual transmission is responsible for the majority of infections 1, resulting in transmission of HIV due to infected semen or vaginal and cervical secretions containing infected lymphocytes. HIV microbicides are formulations of chemical or biological agents that can be applied to the vagina or rectum with the intention of reducing the acquisition of HIV. Tenofovir is an NRTI that is phosphorylated by adenylate kinase to tenofovir diphosphate, which in turn competes with deoxyadeosine 5’-triphosphate for incorporation into newly synthesized HIV DNA. Once incorporated, tenofovir diphosphate results in chain termination, thus inhibiting viral replication. Tenofovir has been formulated into a range of vaginal formulations, such as rings, tablets gels and films. It has been shown to safe and effective in numerous animal models, while demonstrating safety and acceptability in numerous human trials. The most encouraging results came from the CAPRISA 004 clinical trial which demonstrated that a 1% Tenofovir vaginal gel reduced HIV infection by approximately 39%.

Development of a multi-layered vaginal tablet containing dapivirine levonorgestrel and acyclovir for use as a multipurpose prevention technology.

Multipurpose prevention technologies (MPTs) are preferably single dosage forms designed to simultaneously address multiple sexual and reproductive health needs, such as unintended pregnancy, HIV infection and other sexually transmitted infections (STIs). This manuscript describes the development of a range of multi-layered vaginal tablets, with both immediate and sustained release layers capable of delivering the antiretroviral drug dapivirine, the contraceptive hormone levonorgestrel, and the anti-herpes simplex virus drug acyclovir at independent release rates from a single dosage form. Depending on the design of the tablet in relation to the type (immediate or sustained release) or number of layers, the dose of each drug could be individually controlled. For example one tablet design was able to provide immediate release of all three drugs, while another tablet design was able to provide immediate release of both acyclovir and levonorgestrel, while providing sustained release of Dapivirine for up to 8h. A third tablet design was able to provide immediate release of both acyclovir and levonorgestrel, a large initial burst of Dapivirine, followed by sustained release of Dapivirine for up to 8h. All of the tablets passed the test for friability with a percent friability of less than 1%. The hardness of all tablet designs was between 115 and 153N, while their drug content met the European Pharmacopeia 2.9.40 Uniformity of Dosage units acceptance value at levels 1 and 2. Finally, the accelerated stability of all three actives was significantly enhanced in comparison with a mixed drug control.

Development of Disulfiram-Loaded Vaginal Rings for the Localised Treatment of Cervical Cancer

Cervical cancer is the third most prevalent cancer in women and disproportionately affects those in low resource settings due to limited programs for screening and prevention. In the developed world treatment for the disease in the non-metastasised state usually takes the form of surgical intervention and/or radiotherapy. In the developing world such techniques are less widely available. This paper describes the development of an intravaginal ring for the localised delivery of a chemotherapeutic drug to the cervix that has the potential to reduce the need for surgical intervention and will also provide a novel anti-cancer therapy for women in low resource settings. Disulfiram has demonstrated antineoplastic action against prostate, breast and lung cancer. Both PEVA and silicone elastomer were investigated for suitability as materials in the manufacture of DSF eluting intravaginal rings. DSF inhibited the curing process of the silicone elastomer, therefore PEVA was chosen as the material to manufacture the DSF-loaded vaginal rings. The vaginal rings had an excellent content uniformity while the DSF remained stable throughout the manufacturing process. Furthermore, the rings provided diffusion controlled release of DSF at levels well in excess of the IC50 value for the HeLa cervical cancer cell line.

The cytotoxic mechanisms of disulfiram and copper(II) in cancer cells

The anticancer activity of disulfiram (DS) is copper(ii) (Cu)-dependent.