Chuenchit Boonchird

Genome-wide identification of genes involved in tolerance to various environmental stresses in Saccharomyces cerevisiae

During fermentation, yeast cells are exposed to a number of stresses — such as high alcohol concentration, high osmotic pressure, and temperature fluctuation — so some overlap of mechanisms involved in the response to these stresses has been suggested. To identify the genes required for tolerance to alcohol (ethanol, methanol, and 1-propanol), heat, osmotic stress, and oxidative stress, we performed genome-wide screening by using 4828 yeast deletion mutants. Our screens identified 95, 54, 125, 178, 42, and 30 deletion mutants sensitive to ethanol, methanol, 1-propanol, heat, NaCl, and H2O2, respectively. These deleted genes were then classified based on their cellular functions, and cross-sensitivities between stresses were determined. A large number of genes involved in vacuolar H+-ATPase (V-ATPase) function, cytoskeleton biogenesis, and cell wall integrity, were required for tolerance to alcohol, suggesting their protective role against alcohol stress. Our results revealed a partial overlap between genes required for alcohol tolerance and those required for thermotolerance. Genes involved in cell wall integrity and the actin cytoskeleton are required for both alcohol tolerance and thermotolerance, whereas the RNA polymerase II mediator complex seems to be specific to heat tolerance. However, no significant overlap of genes required for osmotic stress and oxidative stress with those required for other stresses was observed. Interestingly, although mitochondrial function is likely involved in tolerance to several stresses, it was found to be less important for thermotolerance. The genes identified in this study should be helpful for future research into the molecular mechanisms of stress response.

Highly efficient bioethanol production by a Saccharomyces cerevisiae strain with multiple stress tolerance to high temperature, acid and ethanol.

Use of super strains exhibiting tolerance to high temperature, acidity and ethanol is a promising way to make ethanol production economically feasible. We describe here the breeding and performance of such a multiple-tolerant strain of Saccharomyces cerevisiae generated by a spore-to-cell hybridization technique without recombinant DNA technology. A heterothallic strain showing a high-temperature (41°C) tolerant (Htg(+)) phenotype, a derivative from a strain isolated from nature, was crossed with a homothallic strain displaying high-ethanol productivity (Hep(+)), a stock culture at the Thailand Institute of Scientific and Technological Research. The resultant hybrid TJ14 displayed ability to rapidly utilize glucose, and produced ethanol (46.6g/l) from 10% glucose fermentation medium at high temperature (41°C). Not only ethanol productivity at 41°C but also acid tolerance (Acd(+)) was improved in TJ14 as compared with its parental strains, enabling TJ14 to grow in liquid medium even at pH 3. TJ14 maintained high ethanol productivity (46.0g/l) from 10% glucose when fermentation was done under multiple-stress conditions (41°C and pH 3.5). Furthermore, when TJ14 was subjected to a repeated-batch fermentation scheme, the growth and ethanol production of TJ14 were maintained at excellent levels over ten cycles of fermentation. Thus, the multiple-stress (Htg(+) Hep(+) Acd(+)) resistant strain TJ14 should be useful for cost-effective bioethanol production under high-temperature and acidic conditions.

CDC19 encoding pyruvate kinase is important for high-temperature tolerance in Saccharomyces cerevisiae

Use of thermotolerant strains is a promising way to reduce the cost of maintaining optimum temperatures in the fermentation process. Here we investigated genetically a Saccharomyces cerevisiae strain showing a high-temperature (41°C) growth (Htg(+)) phenotype and the result suggested that the Htg(+) phenotype of this Htg(+) strain is dominant and under the control of most probably six genes, designated HTG1 to HTG6. As compared with a Htg(-) strain, the Htg(+) strain showed a higher survival rate after exposure to heat shock at 48°C. Moreover, the Htg(+) strain exhibited a significantly high content of trehalose when cultured at high temperature and stronger resistance to Congo Red, an agent that interferes with cell wall construction. These results suggest that a strengthened cell wall in combination with increased trehalose accumulation can support growth at high temperature. The gene CDC19, encoding pyruvate kinase, was cloned as the HTG2 gene. The CDC19 allele from the Htg(+) strain possessed five base changes in its upstream region, and two base changes resulting in silent mutations in its coding region. Interestingly, the latter base changes are probably responsible for the increased pyruvate kinase activity of the Htg(+) strain. The possible mechanism leading to this increased activity and to the Htg(+) phenotype, which may lead to the activation of energy metabolism to maintain cellular homeostasis, is discussed.

Bioconversion of paper sludge to biofuel by simultaneous saccharification and fermentation using a cellulase of paper sludge origin and thermotolerant Saccharomyces cerevisiae TJ14

BackgroundEthanol production from paper sludge (PS) by simultaneous saccharification and fermentation (SSF) is considered to be the most appropriate way to process PS, as it contains negligible lignin. In this study, SSF was conducted using a cellulase produced from PS by the hypercellulase producer, Acremonium cellulolyticus C-1 for PS saccharification, and a thermotolerant ethanol producer Saccharomyces cerevisiae TJ14 for ethanol production. Using cellulase of PS origin minimizes biofuel production costs, because the culture broth containing cellulase can be used directly.ResultsWhen 50 g PS organic material (PSOM)/l was used in SSF, the ethanol yield based on PSOM was 23% (g ethanol/g PSOM) and was two times higher than that obtained by a separate hydrolysis and fermentation process. Cellulase activity throughout SSF remained at around 60% of the initial activity. When 50 to 150 g PSOM/l was used in SSF, the ethanol yield was 21% to 23% (g ethanol/g PSOM) at the 500 ml Erlenmeyer flask scale. Ethanol production and theoretical ethanol yield based on initial hexose was 40 g/l and 66.3% (g ethanol/g hexose) at 80 h, respectively, when 161 g/l of PSOM, 15 filter paper units (FPU)/g PSOM, and 20% inoculum were used for SSF, which was confirmed in the 2 l scale experiment. This indicates that PS is a good raw material for bioethanol production.ConclusionsEthanol concentration increased with increasing PSOM concentration. The ethanol yield was stable at PSOM concentrations of up to 150 g/l, but decreased at concentrations higher than 150 g/l because of mass transfer limitations. Based on a 2 l scale experiment, when 1,000 kg PS was used, 3,182 kFPU cellulase was produced from 134.7 kg PS. Produced cellulase was used for SSF with 865.3 kg PS and ethanol production was estimated to be 51.1 kg. Increasing the yeast inoculum or cellulase concentration did not significantly improve the ethanol yield or concentration.

Characterization and gene expression profiles of thermotolerant Saccharomyces cerevisiae isolates from Thai fruits.

For industrial applications, fermentation of ethanol at high temperature offers advantages such as reduction in cooling costs, reduced risk of microbial contamination and higher efficiency of fermentation processes including saccharification and continuous ethanol stripping. Three thermotolerant Saccharomyces cerevisiae isolates (C3723, C3751 and C3867) from Thai fruits were capable of growing and producing 38 g/L ethanol up to 41°C. Based on genetic analyses, these isolates were prototrophic and homothallic, with dominant homothallic and thermotolerant phenotypes. After short-term (30 min) and long-term (12 h) exposure at 37°C, expression levels increased for the heat stress-response genes HSP26, SSA4, HSP82, and HSP104 encoding the heat shock proteins small HSP, HSP70, HSP90 and the HSP100 family, respectively. In isolates C3723 and C3867, expression was significantly higher than that in reference isolates W303 and TISTR5606 for TPS1 encoding trehalose-6-phosphate synthase, NTH1 encoding neutral trehalase and GSY1 encoding glycogen synthase. The results suggested that continuous high expression of heat stress-response genes was important for the long-term, heat stress tolerance of these thermotolerant isolates.

Enhanced bio-ethanol production from cellulosic materials by semi-simultaneous saccharification and fermentation using high temperature resistant Saccharomyces cerevisiae TJ14

The capability of multi-stress-tolerant Saccharomyces cerevisiae diploid strain TJ14 for the production of cellulosic bio-ethanol by semi-simultaneous saccharification and fermentation (SSSF) technology was evaluated under high-temperature conditions. At 39°C, the TJ14 produced 45 g/l ethanol by SSSF of 100 g (w/v)/l cellulose - a significantly higher concentration than reported in prevailing literature.

Construction of Bordetella pertussis strains with enhanced production of genetically-inactivated Pertussis Toxin and Pertactin by unmarked allelic exchange

BackgroundAcellular Pertussis vaccines against whooping cough caused by Bordetella pertussis present a much-improved safety profile compared to the original vaccine of killed whole cells. The principal antigen of acellular Pertussis vaccine, Pertussis Toxin (PT), must be chemically inactivated to obtain the corresponding toxoid (PTd). This process, however, results in extensive denaturation of the antigen. The development of acellular Pertussis vaccines containing PTd or recombinant PT (rPT) with inactivated S1, Filamentous Hemagglutinin (FHA), and Pertactin (PRN) has shown that the yield of PRN was limiting, whereas FHA was overproduced. To improve antigen yields and process economics, we have constructed strains of Bordetella pertussis that produce enhanced levels of both rPT and PRN.ResultsThree recombinant strains of Bordetella pertussis were obtained by homologous recombination using an allelic exchange vector, pSS4245. In the first construct, the segment encoding PT subunit S1 was replaced by two mutations (R9K and E129G) that removed PT toxicity and Bp-WWC strain was obtained. In the second construct, a second copy of the whole cluster of PT structural genes containing the above mutations was inserted elsewhere into the chromosome of Bp-WWC and the Bp-WWD strain was obtained. This strain generated increased amounts of rPT (3.77 ± 0.53 μg/mL) compared to Bp-WWC (2.61 ± 0.16 μg/mL) and wild type strain (2.2 μg/mL). In the third construct, a second copy of the prn gene was inserted into the chromosome of Bp-WWD to obtain Bp-WWE. Strain Bp-WWE produced PRN at 4.18 ± 1.02 μg/mL in the cell extract which was about two-fold higher than Bp-WWC (2.48 ± 0.10 μg/mL) and Bp-WWD (2.31 ± 0.17 μg/mL). Purified PTd from Bp-WWD at 0.8-1.6 μg/well did not show any toxicity against Chinese hamster ovary (CHO) cell whereas purified PT from WT demonstrated a cell clustering endpoint at 2.6 pg/well.ConclusionsWe have constructed Bordetella pertussis strains expressing increased amounts of the antigens, rPT or rPT and PRN. Expression of the third antigen, FHA was unchanged (always in excess). These strains will be useful for the manufacture of affordable acellular Pertussis vaccines.

Cellular mechanisms contributing to multiple stress tolerance in Saccharomyces cerevisiae strains with potential use in high-temperature ethanol fermentation

High-temperature ethanol fermentation has several benefits including a reduction in cooling cost, minimizing risk of bacterial contamination, and enabling simultaneous saccharification and fermentation. To achieve the efficient ethanol fermentation at high temperature, yeast strain that tolerates to not only high temperature but also the other stresses present during fermentation, e.g., ethanol, osmotic, and oxidative stresses, is indispensable. The C3253, C3751, and C4377 Saccharomyces cerevisiae strains, which have been previously isolated as thermotolerant yeasts, were found to be multiple stress-tolerant. In these strains, continuous expression of heat shock protein genes and intracellular trehalose accumulation were induced in response to stresses causing protein denaturation. Compared to the control strains, these multiple stress-tolerant strains displayed low intracellular reactive oxygen species levels and effective cell wall remodeling upon exposures to almost all stresses tested. In response to simultaneous multi-stress mimicking fermentation stress, cell wall remodeling and redox homeostasis seem to be the primary mechanisms required for protection against cell damage. Moreover, these strains showed better performances of ethanol production than the control strains at both optimal and high temperatures, suggesting their potential use in high-temperature ethanol fermentation.

Differential binding with ERα and ERβ of the phytoestrogen-rich plant Pueraria mirifica

Variations in the estrogenic activity of the phytoestrogen-rich plant, Pueraria mirifica , were determined with yeast estrogen screen (YES) consisting of human estrogen receptors (hER) hERα and hERβ and human transcriptional intermediary factor 2 (hTIF2) or human steroid receptor coactivator 1 (hSRC1), respectively, together with the β-galactosidase expression cassette. Relative estrogenic potency was expressed by determining the β-galactosidase activity (EC50) of the tuber extracts in relation to 17β-estradiol. Twenty-four and 22 of the plant tuber ethanolic extracts interacted with hERα and hERβ, respectively, with a higher relative estrogenic potency with hERβ than with hERα. Antiestrogenic activity of the plant extracts was also determined by incubation of plant extracts with 17β-estradiol prior to YES assay. The plant extracts tested exhibited antiestrogenic activity. Both the estrogenic and the antiestrogenic activity of the tuber extracts were metabolically activated with the rat liver S9-fraction prior to the assay indicating the positive influence of liver enzymes. Correlation analysis between estrogenic potency and the five major isoflavonoid contents within the previously HPLC-analyzed tuberous samples namely puerarin, daidzin, genistin, daidzein, and genistein revealed a negative result.

Two new anti-apoptotic proteins of white spot syndrome virus that bind to an effector caspase (PmCasp) of the giant tiger shrimp Penaeus (Penaeus) monodon

White spot syndrome virus proteins WSSV134 and WSSV322 have been shown to bind with the p20 domain (residues 55-214) of Penaeus monodon caspase (PmCasp) protein through yeast two-hybrid screening. Binding was confirmed for the p20 domain and the full-length caspase by co-immunoprecipitation. WSSV134 is also known as the WSSV structural protein VP36A, but no function or conserved domains have been ascribed to WSSV322. Discovery of the caspase binding activity of these two proteins led to an investigation of their possible anti-apoptotic roles. Full-length PmCasp was confirmed to be an effector caspase by inducing apoptosis in transfected Sf-9 cells as assessed by DAPI staining. Using the same cell model, comparison of cells co-transfected with PmCasp and either WSSV134 or WSSV322 revealed that both of the binding proteins had anti-apoptotic activity. However, using the same Sf-9 protocol with anti-apoptosis protein-1 (AAP-1; also called WSSV449) previously shown to bind and inactivate a different effector caspase from P. monodon (Pm caspase) did not block apoptosis induced by PmCasp. The results revealed diversity in effector caspases and their viral protein inhibitors in P. monodon.