Chunlin Xu

Biocomposites of Nanofibrillated Cellulose, Polypyrrole, and Silver Nanoparticles with Electroconductive and Antimicrobial Properties

In this work, flexible and free-standing composite films of nanofibrillated cellulose/polypyrrole (NFC/PPy) and NFC/PPy-silver nanoparticles (NFC/PPy-Ag) have been synthesized for the first time via in situ one-step chemical polymerization and applied in potential biomedical applications. Incorporation of NFC into PPy significantly improved its film formation ability resulting in composite materials with good mechanical and electrical properties. It is shown that the NFC/PPy-Ag composite films have strong inhibition effect against the growth of Gram-positive bacteria, e.g., Staphylococcus aureus. The electrical conductivity and strong antimicrobial activity makes it possible to use the silver composites in various applications aimed at biomedical treatments and diagnostics. Additionally, we report here the structural and morphological characterization of the composite materials with Fourier-transform infrared spectroscopy, atomic force microscopy, and scanning and transmission electron microscopy techniques.

Kinetics of Acid Hydrolysis of Water-Soluble Spruce O-Acetyl Galactoglucomannans

Water-soluble O-acetyl galactoglucomannan (GGM) is a softwood-derived polysaccharide, which can be extracted on an industrial scale from wood or mechanical pulping waters and now is available in kilogram scale for research and development of value-added products. To develop applications of GGM, information is needed on its stability in acidic conditions. The kinetics of acid hydrolysis of GGM was studied at temperatures up to 90 degrees C in the pH range of 1-3. Molar mass and molar mass distribution were determined using size exclusion chromatography with multiangle laser light scattering and refractive index detection. The molar mass of GGM decreased considerably with treatment time at temperatures above 70 degrees C and pH below 2. The molar mass distribution broadened with hydrolysis time. A first-order kinetic model was found to match the acid hydrolysis. The reaction rate constants at various pH values and temperatures were calculated on the basis of the first-order kinetic model. Furthermore, the activation energy, E, was obtained from the Arrhenius plot. The activation energy E was 150 kJ mol (-1) for acid hydrolysis of spruce GGM. The apparent rate constant during acid hydrolysis increased by a factor of 10 with a decrease in pH by 1 unit, regardless of temperature. In addition, gas chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were applied to study the released GGM monomers and oligomers.

Chemo‐enzymatic Assembly of Clickable Cellulose Surfaces via Multivalent Polysaccharides

The chemists guide to the galactosyl unit: A chemo-enzymatic process is developed for the multivalent functionalization of cellulose surfaces via regioselective oxidation of heteropolysaccharides with galactose 6-oxidase. Reductive amination, surface sorption, and click chemistry enable the assembly of (bio)chemically active cellulose surfaces for applications ranging from functional biocomposites to in vitro diagnostics.

Cellulose nanocrystals prepared via formic acid hydrolysis followed by TEMPO-mediated oxidation

Cellulose nanocrystals (CNCs) as a renewable and biodegradable nanomaterial have wide application value. In this work, CNCs were extracted from bleached chemical pulp using two stages of isolation (i.e. formic acid (FA) hydrolysis and 2,2,6,6-tetramethyl-piperidine-1-oxyl (TEMPO) mediated oxidation) under mild conditions. In the first stage, FA was used to remove hemicellulose, swell cellulose fibers, and release CNCs. The FA could be readily recovered and reused. In the second stage, the CNCs isolated by FA were further modified by TEMPO-mediated oxidation to increase the surface charge of CNCs. It was found that the modified CNCs with more ordered crystal structure and higher surface charge had better redispersibility and higher viscosity in aqueous phase. Therefore, the modified CNCs could be more effective when used as rheology modifier in the fields of water based coating, paint, food etc.

Functional and Anionic Cellulose-Interacting Polymers by Selective Chemo-Enzymatic Carboxylation of Galactose-Containing Polysaccharides

Carboxylated, anionic polysaccharides were selectively prepared using a combination of enzymatic and chemical reactions. The galactose-containing polysaccharides studied were spruce galactoglucomannan, guar galactomannan, and tamarind galactoxyloglucan. The galactosyl units of the polysaccharides were first oxidized with galactose oxidase (EC 1.1.3.9) and then selectively carboxylated, resulting in the galacturonic acid derivatives with good conversion and yield. The degrees of oxidation (DO) of the products were determined by gas chromatography-mass spectrometry (GC-MS). A novel feasible electrospray ionization-mass spectrometry (ESI-MS) method was also developed for the determination of DO. The solution properties and charge densities of the products were investigated. The interaction of the products with cellulose was studied by two methods, bulk sorption onto bleached birch kraft pulp and adsorption onto nanocellulose ultrathin films by quartz crystal microbalance with dissipation (QCM-D). To study the effect of the location of the carboxylic acid groups on the physicochemical properties, polysaccharides were also oxidized by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated reaction producing polyuronic acids. The chemo-enzymatically oxidized galacturonic polysaccharides with an unmodified backbone had a better ability to interact with cellulose than the TEMPO-oxidized products. The selectively carboxylated polysaccharides can be further exploited, as such, or in the targeted functionalization of cellulose surfaces.

Hemicellulose-reinforced nanocellulose hydrogels for wound healing application

Polysaccharides are finding an increasing number of applications in medical and pharmaceutical fields thanks to their biodegradability, biocompatibility, and in some cases bioactivity. Two approaches were applied to use hemicelluloses as crosslinkers to tune the structural and mechanical properties of nanofibrillated cellulose (NFC) hydrogel scaffolds, and thus to investigate the effect of these properties on the cellular behavior during wound healing application. Different types of hemicellulose (galactoglucomannan (GGM), xyloglucan (XG), and xylan) were introduced into the NFC network via pre-sorption (Method I) and in situ adsorption (Method II) to reinforce the NFC hydrogels. The charge density of the NFC, the incorporated hemicellulose type and amount, and the swelling time of the hydrogels were found to affect the pore structure, the mechanical strength, and thus the cells’ growth on the composite hydrogel scaffolds. The XG showed the highest adsorption capacity on the NFC, the highest reinforcement effect, and facilitated/promoted cell growth. The pre-sorbed XG in the low-charged NFC network with a lower weight ratio (NFC/XG-90:10) showed the highest efficacy in supporting the growth and proliferation of fibroblast cells (NIH 3T3). These all-polysaccharide composite hydrogels may work as promising scaffolds in wound healing applications to provide supporting networks and to promote cells adhesion, growth, and proliferation.

Cationic hemicellulose-based hydrogels for arsenic and chromium removal from aqueous solutions

In this work the synthesis of hemicellulose-based hydrogels and their application for the removal of arsenic and chromium ions is described. In a first step O-acetyl galactoglucomannan (GGM) was subjected to a transesterification applying glycidyl methacrylate (GMA) for the synthesis of novel GGM macromonomers. Two distinguished and purified GGM fractions with molar mass of 7.1 and 28 kDa were used as starting materials. The resulting GGM macromonomers (GGM-MA) contained well-defined amounts of methacrylate groups as determined by (1)H NMR spectroscopy. Selected GGM-MA derivatives were consecutively applied as a crosslinker in the synthesis of tailored hydrogels using [2-(methacryloyloxy)ethyl]trimethylammonium chloride (MeDMA) as monomer. The swelling rate of the hydrogels was determined and the coherence between the swelling rate and the hydrogel composition was examined. The morphology of the GGM-based hydrogels was analysed by SEM and the hydrogels revealed a high surface area and were assessed in respect to their ability to remove arsenate and chromate ions from aqueous solutions. The presented bio-based hydrogels are of high interest especially for the mining industries as a sustainable material for the treatment of their highly contaminated wastewaters.

Building Custom Polysaccharides in Vitro with an Efficient, Broad-Specificity Xyloglucan Glycosynthase and a Fucosyltransferase

The current drive for applications of biomass-derived compounds, for energy and advanced materials, has led to a resurgence of interest in the manipulation of plant polymers. The xyloglucans, a family of structurally complex plant polysaccharides, have attracted significant interest due to their intrinsic high affinity for cellulose, both in muro and in technical applications. Moreover, current cell wall models are limited by the lack of detailed structure–property relationships of xyloglucans, due to a lack of molecules with well-defined branching patterns. Here, we have developed a new, broad-specificity “xyloglucan glycosynthase”, selected from active-site mutants of a bacterial endoxyloglucanase, which catalyzed the synthesis of high molar mass polysaccharides, with complex side-chain structures, from suitable glycosyl fluoride donor substrates. The product range was further extended by combination with an Arabidopsis thaliana α(1→2)-fucosyltransferase to achieve the in vitro synthesis of fucosylated xyloglucans typical of dicot primary cell walls. These enzymes thus comprise a toolkit for the controlled enzymatic synthesis of xyloglucans that are otherwise impossible to obtain from native sources. Moreover, this study demonstrates the validity of a chemo-enzymatic approach to polysaccharide synthesis, in which the simplicity and economy of glycosynthase technology is harnessed together with the exquisite specificity of glycosyltransferases to control molecular complexity.

Obtaining Spruce Hemicelluloses of Desired Molar Mass by using Pressurized Hot Water Extraction

There is growing interest in utilizing galactoglucomannan, the main hemicellulose in softwoods, for various applications such as cosmetics, pharmaceuticals, textiles, alimentary, and health products, as well as for the production of fuels. For fuel production and for using the rare sugars as platform chemicals, the hemicelluloses need to be hydrolyzed to sugar monomers, and for this purpose, low-molecular-mass extracts are favorable. However, for the other applications high molecular masses are required, which presents an even greater challenge for extraction. The ability to optimize the extraction process according to the needs of further processing, by using solely water as the solvent, is a key issue in the environmentally friendly utilization of this versatile raw material. The goal of this work is to study how the average molar mass of hemicelluloses extracted from spruce sapwood can be influenced by altering the experimental conditions. The main parameters influencing the extraction and hydrolysis of the hemicelluloses, namely, extraction time, temperature, pH, and chip size, were studied. The results show that it is feasible to develop an extraction process for harvesting spruce hemicelluloses, also of large molar masses, for industrial applications by using pressurized hot water extraction.

Modification of nanofibrillated cellulose using amphiphilic block-structured galactoglucomannans

Nanofibrillated cellulose (NFC) and hemicelluloses have shown to be highly promising renewable components both as barrier materials and in novel biocomposites. However, the hydrophilic nature of these materials restricts their use in some applications. In this work, the usability of modified O-acetyl galactoglucomannan (GGM) for modification of NFC surface properties was studied. Four GGM-block-structured, amphiphilic derivatives were synthesized using either fatty acids or polydimethylsiloxane as hydrophobic tails. The adsorption of these GGM derivatives was consecutively examined in aqueous solution using a quartz crystal microbalance with dissipation monitoring (QCM-D). It was found that the hydrophobic tails did not hinder adsorption of the GGM derivatives to cellulose, which was concluded to be due to the presence of the native GGM-block with high affinity to cellulose. The layer properties of the adsorbed block-co-polymers were discussed and evaluated. Self-standing NFC films were further prepared and coated with the GGM derivatives and the effect of the surface modification on wetting properties and oxygen permeability (OP) of the modified films was assessed.