Cinia Schriber

275 W average output power from a femtosecond thin disk oscillator operated in a vacuum environment.

We present an ultrafast thin disk laser that generates an average output power of 275 W, which is higher than any other modelocked laser oscillator. It is based on the gain material Yb:YAG and operates at a pulse duration of 583 fs and a repetition rate of 16.3 MHz resulting in a pulse energy of 16.9 μJ and a peak power of 25.6 MW. A SESAM designed for high damage threshold initiated and stabilized soliton modelocking. We reduced the nonlinearity of the atmosphere inside the cavity by several orders of magnitude by operating the oscillator in a vacuum environment. Thus soliton modelocking was achieved at moderate amounts of self-phase modulation and negative group delay dispersion. Our approach opens a new avenue for power scaling femtosecond oscillators to the kW level.

Ultrafast thin-disk laser with 80 μJ pulse energy and 242 W of average power

We present a semiconductor saturable absorber mirror (SESAM) mode-locked thin-disk laser generating 80 μJ of pulse energy without additional amplification. This laser oscillator operates at a repetition rate of 3.03 MHz and delivers up to 242 W of average output power with a pulse duration of 1.07 ps, resulting in an output peak power of 66 MW. In order to minimize the parasitic nonlinearity of the air inside the laser cavity, the oscillator was operated in a vacuum environment. To start and stabilize soliton mode locking, we used an optimized high-damage threshold, low-loss SESAM. With this new milestone result, we have successfully scaled the pulse energy of ultrafast laser oscillators to a new performance regime and can predict that pulse energies of several hundreds of microjoules will become possible in the near future. Such lasers are interesting for both industrial and scientific applications, for example for precise micromachining and attosecond science.

SESAMs for High-Power Oscillators: Design Guidelines and Damage Thresholds

We present for the first time to the best of our knowledge a systematic study of lifetime and damage of semiconductor saturable absorber mirrors (SESAMs) designed for operation in high-power oscillators. We characterize and compare nonlinear reflectivity and inverse saturable absorption (ISA) parameters as well as damage threshold and lifetime of different representative SESAMs under test using a nonlinear reflectivity measurement setup at unprecedented high fluence levels. We investigate the catastrophic damage that occurs at very high fluences by demonstrating a dependence of the damage threshold on the ISA parameter F2 and the maximum reflectivity fluence F0. We can clearly demonstrate that the damage fluence Fd scales proportionally to √F2 for all SESAMs. In the case of SESAMs with the same absorber where the product Fsat .ΔR is constant, the damage fluence Fd scales proportionally to F0. Therefore, damage occurs due to heating of the lattice by the energy absorbed due to the ISA process and is not related to the quantum well (QW) absorbers. Furthermore, we present guidelines on how to design samples with high saturation fluences, reduced induced absorption, and high damage thresholds. Using multiple QWs and a suitable di-electric topsection, we achieved SESAMs with saturation fluences >;200 μj/cm2, nonsaturable losses <;0.1%, and reduced ISA. Our best sample could not be damaged at a maximum available fluence of 0.21 J/cm2 and a peak intensity of 370 GW/cm2. These SESAMs will be suitable for future high-power femtosecond oscillators in the kilowatt average output power regime, which is very interesting for attosecond science and industrial material processing applications.

Beam delivery and pulse compression to sub-50 fs of a modelocked thin-disk laser in a gas-filled Kagome-type HC-PCF fiber.

We present two experiments confirming that hypocycloid Kagome-type hollow-core photonic crystal fibers (HC-PCFs) are excellent candidates for beam delivery of MW peak powers and pulse compression down to the sub-50 fs regime. We demonstrate temporal pulse compression of a 1030-nm Yb:YAG thin disk laser providing 860 fs, 1.9 µJ pulses at 3.9 MHz. Using a single-pass grating pulse compressor, we obtained a pulse duration of 48 fs (FWHM), a spectral bandwidth of 58 nm, and an average output power of 4.2 W with an overall power efficiency into the final polarized compressed pulse of 56%. The pulse energy was 1.1 µJ. This corresponds to a peak power of more than 10 MW and a compression factor of 18 taking into account the exact temporal pulse profile measured with a SHG FROG. The compressed pulses were close to the transform limit of 44 fs. Moreover, we present transmission of up to 97 µJ pulses at 10.5 ps through 10-cm long fiber, corresponding to more than twice the critical peak power for self-focusing in silica.

Frontiers in passively mode-locked high-power thin disk laser oscillators.

Semiconductor saturable absorber mirror (SESAM) mode-locked thin disk lasers define the state-of-the-art performance for high average power and high pulse energy femtosecond laser oscillators. To date pulse energies above 30 µJ and average powers above 140 W have been demonstrated. In this paper we review the achievements of mode-locked thin disk lasers in terms of average power and pulse energy. Stable mode locking requires single transverse mode operation even at the highest average power, which is challenging and therefore addressed in more detail. We then summarize our expectations on the main challenges and limitiations for the next generation of mode-locked thin disk laser oscillators with an average power above 500 W and pulse energies in excess of 100 µJ.

SESAM mode-locked Yb:CaGdAlO4 thin disk laser with 62 fs pulse generation.

We present a semiconductor saturable absorber mirror (SESAM) mode-locked thin disk laser (TDL) based on Yb:CaGdAlO(4) (Yb:CALGO) generating 62 fs pulses, which is the shortest pulse duration achieved from mode-locked TDLs to date. The oscillator operates at a repetition rate of 65 MHz and delivers 5.1 W of average output power. The short pulse duration of our TDL in combination with the high intracavity peak power of 44 MW makes this oscillator attractive for intracavity table-top extreme nonlinear optics applications such as high harmonic generation and vacuum ultraviolet frequency comb generation. The current average power was limited by the quality of the Yb:CALGO disk. However, power scaling of Yb:CALGO TDLs to the multi-10-W range with short pulse durations (<100 fs) appears feasible in the near future by using thinner disks of better quality and further optimized SESAMs.

Toward Millijoule-Level High-Power Ultrafast Thin-Disk Oscillators

SESAM modelocked thin-disk lasers have recently reached new frontiers and remain the leading technology in terms of average power and pulse energy, setting new performance levels for ultrafast oscillators. The milestones achieved seem to indicate that there are no major roadblocks ahead to achieve further scaling of modelocked oscillators to kilowatt output powers and millijoule output pulse energies. In this paper, we review the current state of the art and present the next steps toward future generations of millijoule, kilowatt-class ultrafast thin-disk oscillators.

Self-referenceable frequency comb from an ultrafast thin disk laser

We present the first measurement of the carrier envelope offset (CEO) frequency of an ultrafast thin disk laser (TDL). The TDL used for this proof-of-principle experiment was based on the gain material Yb:Lu(2)O(3) and delivered 7 W of average power in 142-fs pulses, which is more than two times shorter than previously realized with this material. Using only 65 mW of the output of the laser, we generated a coherent octave-spanning supercontinuum (SC) in a highly nonlinear photonic crystal fiber (PCF). We detected the CEO beat signal using a standard f-to-2f interferometer, achieving a signal-to-noise ratio of >25 dB (3 kHz resolution bandwidth). The CEO frequency was tunable with the pump current with a slope of 33 kHz/mA. This result opens the door towards high-power frequency combs from unamplified oscillators. Furthermore, it confirms the suitability of these sources for future intralaser extreme nonlinear optics experiments such as high harmonic generation and VUV frequency comb generation from compact sources.

Phase-stabilization of the carrier-envelope-offset frequency of a SESAM modelocked thin disk laser

We phase-stabilized the carrier-envelope-offset (CEO) frequency of a SESAM modelocked Yb:CaGdAlO₄ (CALGO) thin disk laser (TDL) generating 90-fs pulses at a center wavelength of 1051.6 nm and a repetition rate of 65 MHz. By launching only 2% of its output power into a photonic crystal fiber, we generated a coherent octave-spanning supercontinuum spectrum. Using a standard f-to-2f interferometer for CEO detection, we measured CEO beats with 33 dB signal-to-noise ratio in 100 kHz resolution bandwidth. We achieved a tight lock of the CEO frequency at 26.18 MHz by active feedback to the pump current. The residual in-loop integrated phase noise is 120 mrad (1 Hz-1 MHz). This is, to our knowledge, the first CEO-stabilized SESAM modelocked TDL. Our results show that a reliable lock of the CEO frequency can be achieved using standard techniques in spite of the strongly spatially multimode pumping scheme of TDLs. This opens the door towards fully-stabilized low-noise frequency combs with hundreds of watts of average power from table-top SESAM modelocked thin disk oscillators.

Optimized SESAMs for kilowatt-level ultrafast lasers

We present a thorough investigation of surface deformation and thermal properties of high-damage threshold large-area semiconductor saturable absorber mirrors (SESAMs) designed for kilowatt average power laser oscillators. We compare temperature rise, thermal lensing, and surface deformation of standard SESAM samples and substrate-removed SESAMs contacted using different techniques. We demonstrate that for all cases the thermal effects scale linearly with the absorbed power, but the contacting technique critically affects the strength of the temperature rise and the thermal lens of the SESAMs (i.e. the slope of the linear change). Our best SESAMs are fabricated using a novel substrate-transfer direct bonding technique and show excellent surface flatness (with non-measureable radii of curvature (ROC), compared to astigmatic ROCs of up to 10 m for standard SESAMs), order-of-magnitude improved heat removal, and negligible deformation with absorbed power. This is achieved without altering the saturation behavior or the recovery parameters of the samples. These SESAMs will be a key enabling component for the next generation of kilowatt-level ultrafast oscillators.