Cinzia Giannini

Nonhydrolytic Synthesis of High-Quality Anisotropically Shaped Brookite TiO2 Nanocrystals

A surfactant-assisted nonaqueous strategy, relying on high-temperature aminolysis of titanium carboxylate complexes, has been developed to access anisotropically shaped TiO2 nanocrystals selectively trapped in the metastable brookite phase. Judicious temporal manipulation of precursor supply to the reaction mixture enables systematic tuning of the nanostructure geometric features over an exceptionally wide dimensional range (30-200 nm). Such degree of control is rationalized within the frame of a self-regulated phase-changing seed-catalyzed mechanism, in which homogeneous nucleation, on one side, and heterogeneous nucleation/growth processes, on the other side, are properly balanced while switching from the anatase to the brookite structures, respectively, in a continuous unidirectional crystal development regime. The time variation of the chemical potential for the monomer species in the solution, the size dependence of thermodynamic structural stability of the involved titania polymorphs, and the reduced activation barrier for brookite nucleation onto initially formed anatase seeds play decisive roles in the crystal-phase- and shape-tailored growth of titania nanostructures by the present approach.

Assembly of Colloidal Semiconductor Nanorods in Solution by Depletion Attraction

Arranging anisotropic nanoparticles into ordered assemblies remains a challenging quest requiring innovative and ingenuous approaches. The variety of interactions present in colloidal solutions of nonspherical inorganic nanocrystals can be exploited for this purpose. By tuning depletion attraction forces between hydrophobic colloidal nanorods of semiconductors, dispersed in an organic solvent, these could be assembled into 2D monolayers of close-packed hexagonally ordered arrays directly in solution. Once formed, these layers could be fished onto a substrate, and sheets of vertically standing rods were fabricated, with no additional external bias applied. Alternatively, the assemblies could be isolated and redispersed in polar solvents, yielding suspensions of micrometer-sized sheets which could be chemically treated directly in solution. Depletion attraction forces were also effective in the shape-selective separation of nanorods from binary mixtures of rods and spheres. The reported procedures have the potential to enable powerful and cost-effective fabrication approaches to materials and devices based on self-organized anisotropic nanoparticles.

Sequential Cation Exchange in Nanocrystals: Preservation of Crystal Phase and Formation of Metastable Phases

We demonstrate that it is possible to convert CdSe nanocrystals of a given size, shape (either spherical or rod shaped), and crystal structure (either hexagonal wurtzite, i.e., hexagonal close packed (hcp), or cubic sphalerite, i.e., face-centered cubic (fcc)), into ZnSe nanocrystals that preserve all these characteristics of the starting particles (i.e., size, shape, and crystal structure), via a sequence of two cation exchange reactions, namely, Cd(2+) ⇒Cu(+) ⇒Zn(2+). When starting from hexagonal wurtzite CdSe nanocrystals, the exchange of Cd(2+) with Cu(+) yields Cu(2)Se nanocrystals in a metastable hexagonal phase, of which we could follow the transformation to the more stable fcc phase for a single nanorod, under the electron microscope. Remarkably, these metastable hcp Cu(2)Se nanocrystals can be converted in solution into ZnSe nanocrystals, which yields ZnSe nanocrystals in a pure hcp phase.

Tetrapod-Shaped Colloidal Nanocrystals of II−VI Semiconductors Prepared by Seeded Growth

We report a general synthetic approach to tetrapod-shaped colloidal nanocrystals made of various combinations of II-VI semiconductors. Uniform tetrapods were prepared using preformed seeds in the sphalerite structure, onto which arms were grown by coinjection of the seeds and chemical precursors into a hot mixture of surfactants. By this approach, a wide variety of core materials could be chosen (in practice, most of the II-VI semiconductors that could be prepared in the sphalerite phase, namely, CdSe, ZnTe, CdTe); in contrast, the best materials for arm growth were CdS and CdTe. The samples were extensively characterized with the aid of several techniques.

Metallic-like Stoichiometric Copper Sulfide Nanocrystals: Phase- and Shape-Selective Synthesis, Near-Infrared Surface Plasmon Resonance Properties, and Their Modeling

In the realm of semiconductor nanomaterials, a crystal lattice heavily doped with cation/anion vacancies or ionized atomic impurities is considered to be a general prerequisite to accommodating excess free carriers that can support localized surface plasmon resonance (LSPR). Here, we demonstrate a surfactant-assisted nonaqueous route to anisotropic copper sulfide nanocrystals, selectively trapped in the covellite phase, which can exhibit intense, size-tunable LSPR at near-infrared wavelengths despite their stoichiometric, undoped structure. Experimental extinction spectra are satisfactorily reproduced by theoretical calculations performed by the discrete dipole approximation method within the framework of the Drude-Sommerfeld model. The LSPR response of the nanocrystals and its geometry dependence are interpreted as arising from the inherent metallic-like character of covellite, allowed by a significant density of lattice-constitutional valence-band free holes. As a consequence of the unique electronic properties of the nanocrystals and of their monodispersity, coherent excitation of symmetric radial breathing modes is observed for the first time in transient absorption experiments at LSPR wavelengths.

The Impact of the Crystallization Processes on the Structural and Optical Properties of Hybrid Perovskite Films for Photovoltaics.

We investigate the relationship between structural and optical properties of organo-lead mixed halide perovskite films as a function of the crystallization mechanism. For methylammonium lead tri-iodide, the organic cations rearrange within the inorganic cage, moving from crystals grown in a mesoporous scaffold to larger, oriented crystals grown on a flat substrate. This reduces the strain felt by the bonds forming the cage and affects the motion of the organic cation in it, influencing the electronic transition at the onset of the optical absorption spectrum of the semiconductor. Moreover, we demonstrate that in mixed-halide perovskite, though Cl(-) ions are not present in a detectable concentration in the unit cell, they drive the crystallization dynamics. This induces a preferential order during crystallization, from a molecular, i.e., organic-inorganic moieties arrangement, to a nano-mesoscopic level, i.e., larger crystals with anisotropic shape. Finally, we show that while Cl is mainly expelled from flat films made of large crystals, in the presence of an oxide mesoporous scaffold they are partially retained in the composite.

Phosphine-free synthesis of p-type copper(I) selenide nanocrystals in hot coordinating solvents.

We report a phosphine-free synthesis of p-type copper(I) selenide nanocrystals by a colloidal approach in a mixture of oleylamine and 1-octadecene. The nanocrystals had a cuboctahedral shape and cubic berzelianite phase. Films of these nonstoichiometric copper-deficient Cu(2-x)Se nanocrystals were highly conductive and showed high absorption coefficient in the near-infrared region. These nanocrystals could be used as hole-injection layers in optoelectronic devices.

One-Pot Synthesis and Characterization of Size-Controlled Bimagnetic FePt−Iron Oxide Heterodimer Nanocrystals

A one-pot, two-step colloidal strategy to prepare bimagnetic hybrid nanocrystals (HNCs), comprising size-tuned fcc FePt and inverse spinel cubic iron oxide domains epitaxially arranged in a heterodimer configuration, is described. The HNCs have been synthesized in a unique surfactant environment by temperature-driven sequential reactions, involving the homogeneous nucleation of FePt seeds and the subsequent heterogeneous growth of iron oxide. This self-regulated mechanism offers high versatility in the control of the geometric features of the resulting heterostructures, circumventing the use of more elaborate seeded growth techniques. It has been found that, as a consequence of the exchange coupling between the two materials, the HNCs exhibit tunable single-phase-like magnetic behavior, distinct from that of their individual components. In addition, the potential of the heterodimers as effective contrast agents for magnetic resonance imaging techniques has been examined.

Architectural Control of Seeded-Grown Magnetic−Semicondutor Iron Oxide−TiO2 Nanorod Heterostructures: The Role of Seeds in Topology Selection

A colloidal nonaqueous approach to semiconductor-magnetic hybrid nanocrystals (HNCs) with selectable heterodimer topologies and tunable geometric parameters is demonstrated. Brookite TiO(2) nanorods, distinguished by a curved shape-tapered profile with richly faceted terminations, are exploited as substrate seeds onto which a single spherical domain of inverse spinel iron oxide can be epitaxially grown at either one apex or any location along their longitudinal sidewalls in a hot surfactant environment. The topologically controlled arrangement of the component material lattices, the crystallographic relationships holding between them, and strain distribution across individual heterostructures have been studied by combining X-ray diffraction and absorption techniques with high-resolution transmission electron microscopy investigations. Supported by such structural knowledge, the synthetic achievements are interpreted within the frame of various mechanistic models offering complementary views of HNC formation. The different HNC architectures are concluded to be almost equivalent in terms of surface-interface energy balance associated with their formation. HNC topology selection is rationalized on the basis of a diffusion-limited mechanism allowing iron oxide heterogeneous nucleation and growth on the TiO(2) nanorods to switch from a thermodynamically controlled to a kinetically overdriven deposition regime, in which the anisotropic reactivity offered by the uniquely structured seeds is accentuated under high spatially inhomogeneous monomer fluxes. Finally, the multifunctional capabilities of the heterostructures are highlighted through illustration of their magnetic and photocatalytic properties, which have been found to diverge from those otherwise exhibited by their individual material components and physical mixture counterparts.

Non-destructive determination of local strain with 100-nanometre spatial resolution

Structure sizes of ∼180 nm are now standard in microelectronics, and state-of-the-art fabrication techniques can reduce these to just a few tens of nanometres (ref. 1). But at these length scales, the strain induced at interfaces can locally distort the crystal lattice, which may in turn affect device performance in an unpredictable way. A means of non-destructively characterizing such strain fields with high spatial resolution and sensitivity is therefore highly desirable. One approach is to use Raman spectroscopy, but this is limited by the intrinsic ∼0.5-µm resolution limit of visible light probes. Techniques based on electron-beam diffraction can achieve the desired nanometre-scale resolution. But either they require complex sample preparation procedures (which may alter the original strain field) or they are sensitive to distortional (but not dilational) strain within only the top few tens of nanometres of the sample surface. X-rays, on the other hand, have a much greater penetration depth, but have not hitherto achieved strain analysis with sub-micrometre resolution. Here we describe a magnifying diffraction imaging procedure for X-rays which achieves a spatial resolution of 100 nm in one dimension and a sensitivity of 10-4 for relative lattice variations. We demonstrate the suitability of this procedure for strain analysis by measuring the strain depth profiles beneath oxidized lines on silicon crystals.