Claire Marichal

Interactions of oxytetracycline with a smectite clay: a spectroscopic study with molecular simulations.

Binding of antibiotics to clay minerals can decrease both their physical and biological availability in soils. To elucidate the binding mechanisms of tetracycline antibiotics on smectite clays as a function of pH, we probed the interactions of oxytetracycline (OTC) with Na-montmorillonite (MONT) using X-ray diffraction (XRD), infrared (IR), and solid-state nuclear magnetic resonance (NMR) spectroscopies, and Monte Carlo molecular simulations. The XRD patterns demonstrate the presence of OTC in the MONT interlayer space at acidic pH whereas complexation of OTC by external basal and edge sites seems to prevail at pH 8. At both pH, the (1)H-(13)C NMR profile indicates restricted mobility of the adsorbed OTC species; and, -CH(3) deformation and C-N stretching IR vibration bands confirm a binding mechanism involving the protonated dimethylamino group of OTC. Changes in the (23)Na NMR environments are consistent with cation-exchange and cation complexation reactions at the different sites of adsorption. Molecular simulations indicate that MONT interlayer spacing and structural charge localization dictate favorable binding conformations of the intercalated OTC, facilitating multiple interactions in agreement with the spectroscopic data. Our results present complementary insights into the mechanisms of adsorption of TETs on smectites important for their retention in natural and engineered soil environments.

Pure silica chabazite molecular spring: a structural study on water intrusion-extrusion processes.

Water intrusion-extrusion isotherms performed at room temperature on hydrophobic pure silica chabazite show that the water-Si-CHA system displays real spring behavior. However, differences in pressure-volume diagrams are observed between the first and the other intrusion-extrusion cycles, indicating that some water molecules interact with the inorganic framework after the first intrusion. (29)Si and especially (1)H solid-state NMR showed the creation of new defect sites upon the intrusion-extrusion of water and the existence of two kinds of water molecules trapped in the supercage of Si-CHA: a first layer of water strongly hydrogen bonded with the silanols of the framework and a subsequent layer of liquidlike physisorbed water molecules undergoing interaction with the first layer. This hydrogen bonding scheme is also supported by X-ray powder diffraction.

Functionalization of synthetic talc-like phyllosilicates by alkoxyorganosilane grafting

A range of talc-like phyllosilicates were prepared via a hydrothermal synthesis performed at five different temperatures from 160 to 350 °C. The organization of the lattice and the degree of crystallinity of the new materials were evaluated by different techniques such as XRD, FTIR, solid-state 29Si NMR, TEM, FEG-SEM and TG-DTA. When synthesized at low temperature the material presents high degree of hydration, low crystallinity and flawed structure. This was attributed to stevensite-talc interstratified product present in the samples. The stevensite/talc ratio and the hydration decrease in the talc-like phyllosilicate samples when the hydrothermal synthesis temperature increases and so the crystallinity becomes higher. A thermal treatment at 500 °C allowed a significant flaw reduction in talc-like phyllosilicate structure; the synthesized sample at 350 °C and heat treated presents a structure close to that of talc. The different talc-like phyllosilicates were grafted covalently by two organoalkoxysilane reagents, N-(3-triethoxysilylpropyl)-4,5-dihydroimidazole (IM2H) and 2-hydroxy-4-(3-triethoxysilylpropoxy)-diphenylketone (HTDK). The grafted amounts of the hybrids, determined by elemental analysis and confirmed by thermogravimetric data, are dependent on the hydrothermal synthesis temperature and organoalkoxysilanes; they become smaller when the synthesis temperature increases and when HTDK is used. FTIR and solid-state 13C CP MAS NMR were applied to characterize the grafted organic groups. So, in this work it is shown that by choosing the hydrothermal synthesis temperature or by performing an additional annealing it is possible to adjust the amount of defects in the structure of talc-like phyllosilicates which seems to be strongly correlated to the grafting performance.

Multiarm cyclam-grafted mesoporous silica: a strategy to improve the chemical stability of silica materials functionalized with amine ligands

We have explored in this work the stability and the reactivity of multiarm cyclam-grafted mesoporous silica samples in aqueous solution. A series of hybrid materials have been prepared by grafting silylated cyclam molecules bearing one, two, or four silyl groups onto both amorphous silica gel (K60) and ordered mesoporous silica (SBA15). Under these conditions, cyclam moieties are attached to the silica walls via one, two, or four arms. Various physicochemical techniques have been applied to characterize the functionalized solids (elemental analysis, 1H-29Si and 1H-13C CPMAS NMR, and N2 adsorption-desorption isotherms). The interest in two and four arms for improving the chemical stability in solution, by comparison with the system displaying only one arm, has been demonstrated by using a set of complementary experiments involving pH measurements and silicon determination with ICP-AES. Then, the investigation of their protonation and binding properties toward copper(II) has revealed a significant decrease in the reactivity of these hybrids as a consequence of multiarm tethering. A comparison of amorphous and ordered materials has permitted us to point out the influence of mesostructuration on the reactivity of these functionalized solids, especially from a kinetic point of view.

Enhanced interlayer trapping of a tetracycline antibiotic within montmorillonite layers in the presence of Ca and Mg

The formation of a ternary antibiotic-metal-clay complex is hypothesized as the primary adsorption mechanism responsible for the increased adsorption of tetracycline antibiotics on smectites in the presence of divalent metal cations under circumneutral and higher pH conditions. To evaluate this hypothesis, we conducted a spectroscopic investigation of oxytetracycline (OTC) interacting with Na-montmorillonite in the presence and absence of Ca or Mg salts at pH 6 and pH 8. Despite a two-fold increase in OTC adsorbed in the presence of Ca or Mg, both solid-state nuclear magnetic resonance and infrared signatures of the OTC functional groups involved in metal complexation implied that the formation of an inner-sphere ternary complexation was not significant in stabilizing the adsorbate structures. The spectroscopic data further indicated that the positively-charged amino group mediated the OTC adsorption both in the absence and presence of the divalent metal cations. Focusing on the experiments with Mg, X-ray diffraction analysis revealed that the metal-promoted adsorption was coupled with an increased intercalation of OTC within the montmorillonite layers. The resulting interstratified clay layers were characterized by simulating X-ray diffraction of theoretical stacking compositions using molecular dynamics-optimized montmorillonite layers with and without OTC. The simulations uncovered the evolution of segregated interstratification patterns that demonstrated how increased access to smectite interlayers in the presence of the divalent metal cations enhanced adsorption of OTC. Our findings suggest that specific aqueous structures of the clay crystallites in response to the co-presence of Mg and OTC in solution served as precursors to the interlayer trapping of the antibiotic species. Elucidation of these structures is needed for further insights on how aqueous chemistry influences the role of smectite clay minerals in trapping organic molecules in natural and engineered soil particles.

IM-17: a new zeolitic material, synthesis and structure elucidation from electron diffraction ADT data and Rietveld analysis

The synthesis and the structure of IM-17, a new germanosilicate with a novel zeolitic topology, prepared hydrothermally with decamethonium as the organic structure directing agent, are reported. The structure of calcined and partially rehydrated IM-17 of chemical formula per unit cell |(H2O)14.4|[Si136.50Ge39.50O352] was solved ab initio using electron diffraction ADT data in the acentric Amm2 (setting Cm2m) space group and refined by the Rietveld method. This new zeolite framework type contains a 3D pore system made of intersecting 12, 10 and 8-ring channels.

51V Magic-angle-spinning NMR and electric field gradient calculations in V2O5 and γ-LiV2O5 crystals

51V Magic-angle-spinning (MAS) NMR has been applied to V2O5 at two different magnetic field strengths (4.7 and 7.1 T). Both the magnitude and relative orientation of the quadrupole and chemical shift (CS) tensors have been determined by iterative fitting of the 51V MAS NMR lineshapes at the two magnetic field strengths. The reliability of the results is discussed. Moreover, it is shown that previous low-field single-crystal data are fully consistent with the high-field powder-sample MAS NMR results provided that a slight noncoincidence between the CS tensor and the crystal frame axes is considered. The electric field gradient tensor at the vanadium and lithium sites is subsequently used to test several electronic structure calculation at an ab initio Hartree-Fock level in V2O5 and gamma-LiV2O5 crystals. It is shown that a wide distribution of oxygen charges must be considered to describe the particular environment of each type of oxygen atoms. Furthermore, this analysis supports the fact that the vanadyl bond is likely a short ionic bond. NMR is found to be a valuable experimental tool to get insight into the nature of chemical bonds in vanadium oxides.

Synthesis of highly ordered mesoporous hybrid silica from aromatic fluorinated organosilane precursors

Organo-fluorinated mesoporous MCM-41 type silica presenting a high degree of order has been prepared from co-condensation of tetraethoxysilane (TEOS) and pentafluorophenyltriethoxysilane [PFPTES (1)] in the presence of cetyltrimethylammonium bromide as a template. Both basic and acidic routes have been explored. In the presence of an excess of water using fluoro-precursor (1), most of the bound fluoro-organic moieties are cleaved, yielding to pentafluorophenyl doped silica. Higher fluorine content silica-based MCM-41 materials were obtained by using 2-pentafluorophenylethyltriethoxysilane [PFPETES (2)] as the organosilane precursor. In that case, the fluoro-containing groups remain covalently bound to the mesoporous inorganic network, yielding materials with potential hydrophobic, adsorbing and optical properties.

Synthesis of dithiocarbamate-functionalized mesoporous silica-based materials: interest of one-step grafting

The classical approach to prepare dithiocarbamate-functionalized silica involves a two-step procedure based on the reaction of carbon disulfide with a pre-formed amine modified silica sample. A novel approach is proposed here, involving the direct grafting of silica surfaces with the aid of a siloxydithiocarbamate precursor. Functionalization has been applied to three silica samples (a non-ordered silica gel and two ordered mesoporous solids with distinct pore size) to evidence possible effects of mesostructural order and/or pore size of the materials. The performance of the one-step method has been compared to the two-step one and qualitatively discussed in terms of derivatization efficiency regarding the integrity of dithiocarbamate organo-functional groups. Thanks to complementary physico-chemical techniques (N2adsorption/desorption, solid-state NMR, XPS, XRD), the interest of direct grafting has been clearly demonstrated as it allows to access in one step dithiocarbamate-functionalized silicas free of residual amine groups. Moreover, the use of a base in the two-step procedure is likely to induce some degradation of the silica materials. The advantageous features of the direct grafting process were also discussed with respect to Hg(II) adsorption to these materials.

Solid-state NMR studies of micelle-templated mesoporous solids.

In this tutorial review we intend to give an overview of the potential of NMR spectroscopy, and in particular solid-state NMR, in characterising micelle-templated mesoporous materials. Different topics are covered including the study of formation mechanisms, the characterisation of structures, textures, surfaces and interfaces, functionalisation, dynamic properties and structure-reactivity correlations. Some selected examples illustrate the variety of information provided by this spectroscopy. Particular attention is paid to recent technological and/or methodological developments.