Claude L. Chenier

Desorption electrospray ionization mass spectrometric analysis of organophosphorus chemical warfare agents using ion mobility and tandem mass spectrometry

Desorption electrospray ionization mass spectrometry (DESI-MS) has been applied to the direct analysis of sample media for target chemicals, including chemical warfare agents (CWA), without the need for additional sample handling. During the present study, solid-phase microextraction (SPME) fibers were used to sample the headspace above five organophosphorus CWA, O-isopropyl methylphosphonofluoridate (sarin, GB), O-pinacolyl methylphosphonofluoridate (soman, GD), O-ethyl N,N-dimethyl phosphoramidocyanidate (tabun, GA), O-cyclohexyl methylphosphonofluoridate (cyclohexyl sarin, GF) and O-ethyl S-2-diisopropylaminoethyl methyl phosphonothiolate (VX) spiked into glass headspace sampling vials. Following sampling, the SPME fibers were introduced directly into a modified ESI source, enabling rapid and safe DESI of the toxic compounds. A SYNAPT HDMS instrument was used to acquire time-aligned parallel (TAP) fragmentation data, which provided both ion mobility and MS(n) (n = 2 or 3) data useful for the confirmation of CWA. Unique ion mobility profiles were acquired for each compound and characteristic product ions of the ion mobility separated ions were produced in the Triwave transfer collision region. Up to six full scanning MS(n) spectra, containing the [M + H](+) ion and up to seven diagnostic product ions, were acquired for each CWA during SPME fiber analysis. A rapid screening approach, based on the developed methodology, was applied to several typical forensic media, including Dacron sampling swabs spiked with 5 microg of CWA. Background interference was minimal and the spiked CWA were readily identified within one minute on the basis of the acquired ion mobility and mass spectrometric data.

Packed capillary liquid chromatography–electrospray mass spectrometry of snow contaminated with sarin

Packed capillary liquid chromatography-electrospray mass spectrometry (LC-ESI-MS) was used for the analysis of a snow sample that was accidentally contaminated with an organophosphorus chemical warfare agent during the destruction of a chemical munition. Sarin, its hydrolysis products and a number of related compounds were identified on the basis of acquired LC-ESI-MS data. Full mass spectra were acquired for 14 compounds, with all exhibiting MH+, [MH+ACN]+ ions and/or protonated dimers that could be used to confirm molecular mass. Sampling cone voltages from 20 to 70 V were utilized with the higher sampling voltages enhancing formation of structurally important product ions in the ESI interface. All data were acquired with a time-of-flight mass spectrometer with a resolution of 5,000 (50% valley definition), a resolution that aided in the assignment of elemental composition of the observed ions. The application of LC-ESI-MS to snow analysis appears to be an attractive alternative to the GC-MS methods, since both chemical warfare agents and their hydrolysis products may be analysed directly, eliminating the need for additional sample handling and derivatization steps.

Mass spectrometric analysis of chemical warfare agents and their degradation products in soil and synthetic samples.

A packed capillary liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method was developed for the identification of chemical warfare agents, their degradation products and related compounds in synthetic tabun samples and in soil samples collected from a former mustard storage site. A number of organophosphorus and organosulfur compounds that had not been previously characterized were identified, based on acquired high-resolution ESI-MS data. At lower sampling cone voltages, the ESI mass spectra were dominated by protonated, sodiated and protonated acetonitrile adducts and/or their dimers that could be used to confirm the molecular mass of each compound. Structural information was obtained by inducing product ion formation in the ESI interface at higher sampling cone voltages. Representative ESI-MS mass spectra for previously uncharacterized compounds were incorporated into a database as part of an on-going effort in chemical warfare agent detection and identification. The same samples were also analyzed by capillary column gas chromatography (GC)-MS in order to compare an established method with LC-ESI-MS for chemical warfare agent identification. Analysis times and full-scanning sensitivities were similar for both methods, with differences being associated with sample matrix, ease of ionization and compound volatility. GC-MS would be preferred for organic extracts and must be used for the determination of mustard and relatively non-polar organosulfur degradation products, including 1,4-thioxane and 1,4-dithiane, as these compounds do not ionize during ESI-MS. Diols, formed following hydrolysis of mustard and longer-chain sulfur vesicants, may be analyzed using both methods with LC-ESI-MS providing improved chromatographic peak shape. Aqueous samples and extracts would, typically, be analyzed by LC-ESI-MS, since these analyses may be conducted directly without the need for additional sample handling and/or derivatization associated with GC-MS determinations. Organophosphorus compounds, including chemical warfare agents, related compounds and lower volatility hydrolysis products may all be determined during a single LC-ESI-MS analysis. Derivatization of chemical warfare agent hydrolysis products and other compounds with hydroxyl substitution would be required prior to GC-MS analysis, giving LC-ESI-MS a definite advantage over GC-MS for the analysis of samples containing chemical warfare agents and/or their hydrolysis products.