Claudia Aurisicchio

Self-Assembly of Flexible One-Dimensional Coordination Polymers on Metal Surfaces

We employed a de novo synthesized porphyrin module to construct one-dimensional (1D) Cu-coordinated polymers on Cu(111) and Ag(111) surfaces. The programmed geometry and functionality of the molecular module together with its conformational flexibility and substrate interaction yields sinuous metal-organic polymeric assemblies, based on an unusual two-fold Cu-pyridyl coordination motif. An analysis of scanning tunneling microscopy (STM) data reveals the occurrence of two enantiomers, resulting from the surface confinement that deconvolutes the module in 2D-chiral conformational isomers. The stereoisomers exhibit site-specific surface anchoring, from whence three discrete orientations are possible for each species. Their sequence and mutual arrangement determine direction and curvature of the metal-organic chains. The Cu-coordinated polymers are very similar on both Cu(111) and Ag(111), where their formation is induced by intrinsic and coevaporated adatoms, respectively, which indicates that the lateral bonding motif is predominantly independent of the substrate. In addition, molecular manipulation experiments show the collective motion of entire segments of the Cu-coordinated multi-porphyrin polymers.

Surface-assisted assembly of discrete porphyrin-based cyclic supramolecules.

We employed de novo synthesized porphyrin modules to construct discrete cyclic supramolecular architectures supported on a copper surface. The programmed geometry and functionality of the molecular modules together with their conformational flexibility and substrate interaction yields symmetric discrete assemblies, including dimers and chains as well as three- to six-membered cyclic structures. The area of the molecular cavities is extended by creating bicomponent structures combining building blocks with different symmetry.

Hierarchic self-assembly of nanoporous chiral networks with conformationally flexible porphyrins.

We report the hierarchic design of homochiral 2D nanoporous networks under ultrahigh vacuum conditions on the Ag(111) surface by using a flexible porphyrin derivative as a primary unit. The conformational adaptation of the molecular module gives rise to two enantiomers upon 2D confinement, which self-assemble in enantiopure clusters made of three molecules reflecting chiral recognition, which constitute the secondary supramolecular building block mediating the formation of the tertiary complex open networks. Our results show that the creation of homochiral superstructures based on the hierarchical assembly of conformationally flexible molecular components constitutes a unique pathway toward the design of novel and functional chiral structures.

Two-Dimensional Short-Range Disordered Crystalline Networks from Flexible Molecular Modules

Studies of complex condensed matter systems have led to the discovery of materials of unexpected spatial organization as glasses, glassy crystals, quasicrystals, and protein and virus crystals. Here, we present two-dimensional (2D) short-range disordered molecular crystalline networks, which, regarding spatial organization, can be considered as surface analogues of 3D glassy crystals. In particular, the deposition of a flexible molecular module on Cu(111) gives rise to distinct phases whose characteristics have been examined in real space by scanning tunneling microscopy: a 2D short-range distortional disordered crystalline network and a 2D short-range orientational disordered crystalline network, respectively. Both phases exhibit a random arrangement of nanopores that are stabilized by the simultaneous presence of metal-organic and pyridyl-pyridyl interactions. The 2D short-range distortional disordered crystalline network displayed intriguing flexibility, as probed by the STM tip that modifies the pore shape, a prerequisite for adaptive behavior in host-guest processes.

Supramolecular assembly of interfacial nanoporous networks with simultaneous expression of metal-organic and organic-bonding motifs

The formation of 2D surface-confined supramolecular porous networks is scientifically and technologically appealing, notably for hosting guest species and confinement phenomena. In this study, we report a scanning tunneling microscopy (STM) study of the self-assembly of a tripod molecule specifically equipped with pyridyl functional groups to steer a simultaneous expression of lateral pyridyl-pyridyl interactions and Cu-pyridyl coordination bonds. The assembly protocols yield a new class of porous open assemblies, the formation of which is driven by multiple interactions. The tripod forms a purely porous organic network on Ag(111), phase α, in which the presence of the pyridyl groups is crucial for porosity, as confirmed by molecular dynamics and Monte Carlo simulations. Additional deposition of Cu dramatically alters this scenario. For submonolayer coverage, three different porous phases coexist (i.e., β, γ, and δ). Phases β and γ are chiral and exhibit a simultaneous expression of lateral pyridyl-pyridyl interactions and twofold Cu-pyridyl linkages, whereas phase δ is just stabilized by twofold Cu-pyridyl bonds. An increase in the lateral molecular coverage results in a rise in molecular pressure, which leads to the formation of a new porous phase (ε), only coexisting with phase α and stabilized by a simultaneous expression of lateral pyridyl-pyridyl interactions and threefold Cu-pyridyl bonds. Our results will open new avenues to create complex porous networks on surfaces by exploiting components specifically designed for molecular recognition through multiple interactions.

Photoinduced structural modifications in multicomponent architectures containing azobenzene moieties as photoswitchable cores

Four novel π-conjugated chromophores with an azobenzene core (1–4) have been synthesized exploiting Pd-catalysed cross-coupling reactions between ethynyl-bearing azobenzene cores and suitably-designed peripheral groups. While in molecules 2 and 3 the azobenzene core is equipped, respectively, with ethynyl and 1,3-butadiyne spacers terminated with a substituted aniline, molecule 4 is an homologue of derivative 2 in which the terminal moieties are replaced by meso-substituted Zn-porphyrins. X-Ray crystallographic studies of substituted azobenzene 2 reveal a nearly planar arrangement of the four phenyl rings and the trans configuration of the NN central unit. The UV-Vis absorption spectrum of molecule 1 in cyclohexane (CHX) is very similar to that of unsubstituted azobenzenes; upon irradiation at the maximum of the intense π–π absorption feature (360 nm), 1 undergoes trans → cisphotoisomerization reaching a photostationary state. The process is fully reversible both photochemically and thermally (ca. 120 min in the dark). The UV-Vis electronic absorption features of 2–4 are dramatically different compared to those of 1, but the photochemical process can still be traced and exhibits full reversibility in CHX. Also in the case of compound 4, where the photoreactive azobenzene excited states might be quenched by the low-lying porphyrin electronic levels, the photoreaction does occur. Extensive STM investigations of self-assembled monolayers (SAMs) of 2 and 3 at the solid/liquid interface were performed by means of scanning tunneling microscopy (STM) on highly oriented pyrolytic graphite (HOPG). It is evidenced that only the trans isomer can be physisorbed on the surface whereas the cis form, either produced under illumination in situ or prepared by irradiation of the solution prior to deposition (ex-situ), is never observed on the surface. The smallest azobenzene 1 and the bisporphyrin system 4 did not physisorb onto the surface because of the very small size and the bulky 3,5-di(tert-butyl)phenyl groups hindering flat adsorption on HOPG, respectively.

NLO Response of Photoswitchable Azobenzene‐Based Materials

The nonlinear optical (NLO) response of three π-conjugated azobenzene (AB) derivatives was investigated under picosecond laser excitation by means of the Z-scan technique to evaluate the effect of an ethynyl-based conjugated spacer on the NLO properties of ABs. All modules possessed large third-order nonlinearity, but unexpectedly it was the less extended AB derivative that exhibited the largest NLO response. This finding has been confirmed by means of DFT calculations and was attributed to a higher cis/trans ratio of the particular AB derivative in its investigated photoequilibrated state. Furthermore, the influence of the amount of cis isomer on the third-order nonlinear susceptibility [χ((3))] of the less extended AB derivative has been thoroughly investigated. Specifically, modulation of the NLO response has been successfully achieved by tuning the isomeric composition of the investigated photostationary state. These results highlighted the cis-dependent increase of the NLO response to support the general idea that such compounds can be used for multistep switching NLO materials.

Walking down the chalcogenic group of the periodic table: from singlet to triplet organic emitters.

The synthesis, X-ray crystal structures, ground- and excited-state UV/Vis absorption spectra, and luminescence properties of chalcogen-doped organic emitters equipped on both extremities with benzoxa-, benzothia-, benzoselena- and benzotellurazole (1X and 2X ) moieties have been reported for the first time. The insertion of the four different chalcogen atoms within the same molecular skeleton enables the investigation of only the chalcogenic effect on the organisation and photophysical properties of the material. Detailed crystal-structure analyses provide evidence of similar packing for 2O -2Se , in which the benzoazoles are engaged in π-π stacking and, for the heavier atoms, in secondary X⋅⋅⋅X and X⋅⋅⋅N bonding interactions. Detailed computational analysis shows that the arrangement is essentially governed by the interplay of van der Waals and secondary bonding interactions. Progressive quenching of the fluorescence and concomitant onset of phosphorescence features with gradually shorter lifetimes are detected as the atomic weight of the chalcogen heteroatom increases, with the tellurium-doped derivatives exhibiting only emission from the lowest triplet excited state. Notably, the phosphorescence spectra of the selenium and tellurium derivatives can be recorded even at room temperature; this is a very rare finding for fully organic emitters.