Clésio Soldateli Paim

Gemifloxacin mesylate (GFM) stability evaluation applying a validated bioassay method and in vitro cytotoxic study.

The validation of a microbiological assay applying the cylinder-plate method to determine the quinolone gemifloxacin mesylate (GFM) content is described. Using a strain of Staphylococcus epidermidis ATCC 12228 as the test organism, the GFM content in tablets at concentrations ranging from 0.5 to 4.5 μg mL(-1) could be determined. A standard curve was obtained by plotting three values derived from the diameters of the growth inhibition zone. A prospective validation showed that the method developed is linear (r=0.9966), precise (repeatability and intermediate precision), accurate (100.63%), specific and robust. GFM solutions (from the drug product) exposed to direct UVA radiation (352 nm), alkaline hydrolysis, acid hydrolysis, thermal stress, hydrogen peroxide causing oxidation, and a synthetic impurity were used to evaluate the specificity of the bioassay. The bioassay and the previously validated high performance liquid chromatographic (HPLC) method were compared using Students t test, which indicated that there was no statistically significant difference between these two validated methods. These studies demonstrate the validity of the proposed bioassay, which allows reliable quantification of GFM in tablets and can be used as a useful alternative methodology for GFM analysis in stability studies and routine quality control. The GFM reference standard (RS), photodegraded GFM RS, and synthetic impurity samples were also studied in order to determine the preliminary in vitro cytotoxicity to peripheral blood mononuclear cells. The results indicated that the GFM RS and photodegraded GFM RS were potentially more cytotoxic than the synthetic impurity under the conditions of analysis applied.

Development and validation of a dissolution test for telithromycin in coated tablets

A dissolution test for telithromycin tablets was validated and developed. In order to choose the most discriminatory one, the conditions to carry out are 900 mL of sodium phosphate buffer at pH 7.5, paddles at 50 rpm stirring speed, time test set to 60 min and using USP apparatus 2 with paddles. The UV spectrophotometric method for determination of telithromycin released was developed and validated. The method presents linearity (r = 1) in the concentration range of 20–60 μg/mL. Precision and recoveries were good, 100.62 and 97.06%, respectively. The method was successfully used for the dissolution test of telithromycin tablets.

LC method for telithromycin in tablets: a stability-indicating assay.

A liquid chromatographic (LC) method for the quantitative determination of telithromycin, the first member of the ketolides, which is a new class of macrolides, was developed. Analytical parameters were studied according to International Conference on Harmonization (ICH) guidelines. An Ace RP-18 octadecyl silane column (250 mm x 4.6 mm, 5 microm) maintained at 50 degrees C was used as the stationary phase, and methanol and 0.067 M potassium monobasic phosphate buffer pH 4.0 (55:45, v/v) were used as the mobile phase with UV detection at 265 nm. In forced degradation studies, the effects of acid, base, oxidation, UV light and temperature were investigated showing no interference in the drug peak. The method was linear (r=0.9999) at concentration ranging from 10.0 to 40.0 microg/mL, precise (intra-day relative standard deviation [RSD] and inter-day RSD values<2.0%), accurate (mean recovery=100.76%), specific and robust. Detection and quantitation limits were 0.0027 and 0.0082 microg/mL, respectively. The results showed the proposed method is suitable for its intended use. The validated method may be used to quantify telithromycin tablets and to determine the stability of the drug. The method is able to separate telithromycin from its degradation products and tablet excipients for its sensitivity and reproducibility. These results are in accordance with a previous microbiological assay study, which used the same tested conditions showing that the methods can be interchangeable.

Gemifloxacin mesylate: UV spectrophotometric method for quantitative determination using experimental design for robustness

This study describes the validation of UV spectrophotometric method for quantitative determination of gemifloxacin mesylate (GFM) in tablets using methanol as solvent. The method was specific, linear, precise, exact and robust at 272 and 343 nm. The results confirmed that the method in both wavelengths is valid and useful to the routine quality control of GFM in coated tablets. The validate method was compared to liquid chromatography (HPLC), microbiological assay and visible (VIS) spectrophotometry, which were previously developed and validated to the same drug. There was not significative difference between the methods for GFM quantitation.

LC and UV Methods for Lamotrigine Determination in Pharmaceutical Formulation

Liquid chromatography (LC) and ultraviolet spectrophotometric (UV) methods for lamotrigine (LTG) determination were validated. The LC separation was achieved on an ACE RP-18 as stationary phase and 0.3% triethylamine in water (v/v) pH 4.0 : methanol (62 : 38, v/v) as mobile phase. Detection was achieved with a photodiode array at 279 nm. The detection response for LTG was linear (𝑟2=0.9999). The specificity and stability were proved using stress conditions. The CV (%) values for intraday and interday precision were less than 2.0%. The method was accurate and robust. The 𝑡-student test proved that the LC and UV methods are interchangeable.

Simultaneous analysis of gemifloxacin mesylate and its main synthetic impurity by an optimized capillary zone electrophoretic method

A simple and rapid stability indicating capillary zone electrophoretic (CZE) method was validated for the simultaneous determination of gemifloxacin mesylate (GFM) and its main synthetic impurity. The method was performed with a fused-silica capillary (50 μm i.d.) maintained at 30 °C. The background electrolyte consisted of 25 mM borate buffer (pH 10) and the separation was achieved applying 30 kV. The samples were injected hydrodynamically (6 s at 50 mbar) and detection was done at 220 nm. The procedure was validated by specificity, limit of detection (LOD), limit of quantification (LOQ), linearity, accuracy, precision and robustness. Degradations were performed in 0.1 M HCl, 0.01 M NaOH, 30% H2O2, moist heat at 60 °C and exposure to UV-A radiation to show the specificity and stability-indicating capability. Otherwise the excipients did not interfere with the quantitation of GFM. The method was linear for GFM (20.0–80.0 μg mL−1) and its synthetic impurity (3.0–20.0 μg mL−1). LOD and LOQ were 1.0 and 3.0 μg mL−1, respectively, for synthetic impurity. The results of precision and accuracy showed values that agreed with the literature and the Plackett–Burman experimental design applied confirmed the robustness. The proposed method was used for the quantitative analysis of GFM and its synthetic impurity.

Dissolution method for delapril and manidipine combination tablets based on an absorption profile of manidipine

The present study describes the development and validation of a dissolution method for delapril (DEL) and manidipine (MAN) combination tablets, using a simulated absorption profile based on in vivo data for MAN. The suitable in vitro dissolution profile for this formulation was obtained using 900 mL of citrate buffer pH 3.2 at 37 °C±0.5 °C as dissolution medium and USP apparatus 2 (paddle) at 75 rpm. All samples were analyzed by a liquid chromatography (LC) method. Under these conditions, a significant linear relationship between the absorbed (calculated by deconvolution approach) and dissolved fractions of MAN was obtained (R=0.997) and an in vivo-in vitro (IVIV) correlation for this particular formulation containing MAN can be established. Validation parameters for dissolution methodology such as the specificity, linearity, accuracy and precision were also evaluated according to the international guidelines, giving results within the acceptable range. Therefore, the proposed dissolution conditions can be applied for the simultaneous release analysis of DEL and MAN from the solid dosage form, contributing to the improvement of the quality control of pharmaceutics and minimizing the number of bioavailability studies.

Structural elucidation of gemifloxacin mesylate degradation product.

Gemifloxacin mesylate (GFM), chemically (R,S)-7-[(4Z)-3-(aminomethyl)-4-(methoxyimino)-1-pyrrolidinyl]-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic acid methanesulfonate, is a synthetic broad-spectrum antibacterial agent. Although many papers have been published in the literature describing the stability of fluorquinolones, little is known about the degradation products of GFM. Forced degradation studies of GFM were performed using radiation (UV-A), acid (1 mol L(-1) HCl) and alkaline conditions (0.2 mol L(-1) NaOH). The main degradation product, formed under alkaline conditions, was isolated using semi-preparative LC and structurally elucidated by nuclear magnetic resonance (proton - (1) H; carbon - (13) C; correlate spectroscopy - COSY; heteronuclear single quantum coherence - HSQC; heteronuclear multiple-bond correlation - HMBC; spectroscopy - infrared, atomic emission and mass spectrometry techniques). The degradation product isolated was characterized as sodium 7-amino-1-pyrrolidinyl-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylate, which was formed by loss of the 3-(aminomethyl)-4-(methoxyimino)-1-pyrrolidinyl ring and formation of the sodium carboxylate. The structural characterization of the degradation product was very important to understand the degradation mechanism of the GFM under alkaline conditions. In addition, the results highlight the importance of appropriate protection against hydrolysis and UV radiation during the drug-development process, storage, handling and quality control.

Stability Study of Finasteride: Stability-Indicating LC Method, In Silico and LC–ESI-MS Analysis of Major Degradation Product, and an In Vitro Biological Safety Study

Stability studies of the pharmaceutically important compound finasteride were conducted in order to evaluate decomposition of the drug under forced degradation conditions. A simple stability-indicating liquid chromatography method was developed and validated for the evaluation of finasteride and degradation products formed in pharmaceutical preparations and the raw material. Isocratic LC separation was achieved on a C18 column using a mobile phase of o-phosphoric acid (0.1% v/v), adjusted to pH 2.8 with triethylamine (10% v/v) and acetonitrile (52:48 v/v), with a flow rate of 1.0 mL min-1. The alkaline degradation kinetics of the drug were also evaluated and could be best described as second-order kinetics under the experimental conditions applied for the tablets and raw material. Based on in silico studies and molecular weight confirmation, a comprehensive degradation pathway for the drug and the identity of its major product could be suggested without complicated isolation or purification processes. Furthermore, a biological safety study was performed to evaluate the effect of the degraded sample in relation to the intact molecule. The results showed that the degraded sample affected the cell proliferation. Therefore, these studies show that special care must be taken during the manipulation, manufacture and storage of this pharmaceutical drug.

Stability-indicating comparative methods using mekc and lc for determination of olmesartan medoxomil

A stability-indicating method using MEKC was validated for the analysis of olmesartan medoxomil in tablets. Successful separation was achieved using a fused silica capillary (40 cm x 50 µm i.d.); background electrolyte consisted of a combination of 10 mmol L-1 borate buffer and 5 mmol L-1 anionic detergent sodium dodecyl sulfate (95:5; v/v) pH 6.5; hydrodynamic mode at 50 mBar for 5 s; 25 kV separation voltage at 25 oC; and column temperature 25 oC with detection at 257 nm. The proposed method, validated following ICH guidelines, was applied to the determination of this antihypertensive with good results compared with an LC method.