Congfeng Luo

Three-column fixation for complex tibial plateau fractures.

Objectives: 1) To introduce a computed tomography-based “three-column fixation” concept; and 2) to evaluate clinical outcomes (by using a column-specific fixation technique) for complex tibial plateau fractures (Schatzker classification Types V and VI). Design: Prospective cohort study. Setting: Level 1 trauma center. Patients: Twenty-nine cases of complex tibial plateau fractures were included. Based on routine x-ray and computed tomography images, all the fractures were classified as a “three-column fracture,” which means at least one separate fragment was found in lateral, medial, and posterior columns in the proximal tibia (Schatzker classification Types V and VI). Intervention: The patients were operated on in a “floating position” with a combined approach, an inverted L-shaped posterior approach combined with an anterior-lateral approach. All three columns of fractures were fixed. Outcome Measures: Operative time, blood loss, quality of reduction and alignment, fracture healing, complications, and functional outcomes based on Hospital for Special Surgery score and lower-extremity measure were recorded. Results: All the cases were followed for average 27.3 months (range, 24-36 months). All the cases had satisfactory reduction except one case, which had a 4-mm stepoff at the anterior ridge of the tibial plateau postoperatively. No case of secondary articular depression was found. One case had secondary varus deformity, one case had secondary valgus deformity, and two cases of screw loosening occurred postoperatively. No revision surgery was performed. Two cases had culture-negative wound drainage. No infection was noted. The average radiographic bony union time and full weightbearing time were 13.1 weeks (range, 11-16 weeks) and 16.7 weeks (range, 12-24 weeks), respectively. The mean Short Form 36, Hospital for Special Surgery score, and lower-extremity measure at 24 months postoperatively were 89 (range, 80-98), 90 (range, 84-98), and 87 (range, 80-95), respectively. The average range of motion of the affected knee was 2.7° to 123.4° at 2 years after the operation. Conclusion: Three-column fixation is a new fixation concept in treating complex tibial plateau fractures, which is especially useful for multiplanar fractures involving the posterior column. The combination of posterior and anterior-lateral approaches is a safe and effective way to have direct reduction and satisfactory fixation for such difficult tibial plateau fractures.

Improvement of blood flow, expression of nitric oxide, and vascular endothelial growth factor by low-energy shockwave therapy in random-pattern skin flap model.

Extracorporeal shock wave therapy (ESWT) can improve flap survival, but its mechanism remains unclear. In this study, we aim to investigate whether ESWT can improve blood flow in ischemic skin flaps and the possible mechanism. Cranially based random-pattern flap (3 × 10 cm) model was established, and its ischemic portion was treated with or without ESWT at 0.09 mJ/mm2 with 750 impulses (1.5 Hz), immediately after operation. Survival area, blood flow, vessel distribution, microvessel density, and expression of nitric oxide and vascular endothelial growth factor were evaluated at 1, 3, and 10 days postoperatively. The results showed that blood perfusion, expression of nitric oxide and vascular endothelial growth factor, vasodilatation of pre-existing vessels at early postoperative stage, neovascularization at late stage, and flap survival were all significantly promoted in treatment group. In conclusion, ESWT can improve skin flap surviving rate through enhanced vasodilatation at early postoperative stage and neovascularization at late stage via modulation of angio-active factors expression.

A comparative study of Less Invasive Stabilization System (LISS) fixation and two-incision double plating for the treatment of bicondylar tibial plateau fractures.

The present investigation is a prospective study comparing the use of locked plates and classic double plates for the repair of bicondylar tibial plateau fractures. Eighty-four patients with bicondylar tibial plateau fractures were treated with plate fixation by either a locked plate (Less Invasive Stabilization System, LISS) or classic double plates (DP). All patients were followed for a minimum of 24 months. Outcomes were assessed by recording the surgical experience with each approach, post-operative complications and improvements in knee function as measured by the Hospital for Special Surgery (HSS) score. For all patients, no differences in the mechanisms of injury, fracture type, open fracture grade, mean age, gender distribution, associated medical conditions, pre-surgical stay, surgical time, bony union rate or radiographic healing times were observed between the two groups. Also, the HSS score and incidences of infection, seroma, hematoma, deep venous thrombosis, loss of reduction, loss of alignment, hardware failure and overall post-operative complications were all similar in both groups (P>0.05). Wound size and blood loss were significantly less in the LISS group than in the DP group (both P<0.05). A significantly higher incidence of post-operative malalignment of the proximal tibia (P=0.041) and a trend toward significance of a higher incidence of symptomatic hardware irritation (P=0.057) were observed in the LISS group compared to the DP group. In conclusion, LISS provides an alternative treatment for bicondylar tibial plateau fractures, but it may not replace the conventional two-incision double plating technique as the standard of care.

Biomechanical analysis of four different fixations for the posterolateral shearing tibial plateau fracture

The posterolateral shearing tibial plateau fracture is uncommon in the literature, however with the increased usage of computer tomography (CT), the incidence of these fractures is no longer as low as previously thought. Few studies have concentrated on this fracture, least of all using a biomechanical model. The purpose of this study was to compare and analyse the biomechanical characteristics of four different types of internal fixation to stabilise the posterolateral shearing tibial plateau fracture. Forty synthetic tibiae (Synbone, right) simulated the posterolateral shearing fracture models and these were randomly assigned into four groups; Group A was fixed with two anterolateral lag screws, Group B with an anteromedial Limited Contact Dynamic Compression Plate (LC-DCP), Group C with a lateral locking plate, and Group D with a posterolateral buttress plate. Vertical displacement of the posterolateral fragment was measured using three different strengths of axial loading force, and finally loaded until fixation failure. It was concluded that the posterolateral buttress plate is biomechanically the strongest fixation method for the posterolateral shearing tibial plateau fracture.

Fractures of the Distal Tibia Treated with Polyaxial Locking Plating

AbstractWe evaluated the healing rate, complications, and functional outcomes in 32 adult patients with very short metaphyseal fragments in fractures of the distal tibia treated with a polyaxial locking system. The average distance from the distal extent of the fracture to the tibial plafond was 11 mm. All fractures healed and the average time to union was 14 weeks. Six patients (19%) reported occasional local disturbance over the medial malleolus. There were two cases of postoperative superficial infections and evidence of delayed wound healing. Using the American Orthopaedic Foot and Ankle Society ankle score, the average functional score was 87.3 points (of 100 total possible points). Our results show the polyaxial locking plates, which offer more fixation versatility, may be a reasonable treatment option for distal tibia fractures with very short metaphyseal segments. Level of Evidence: Level IV, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Computed tomography-based Three-Column Classification in tibial plateau fractures: introduction of its utility and assessment of its reproducibility.

BACKGROUND The purpose of our study is to introduce a new Three-Column Classification for tibial plateau fractures and evaluate its reproducibility and reliability. METHODS From December 2004 to December 2006, 278 consecutive patients with tibial plateau fractures were treated operatively at the Department of Orthopedics and Trauma III in Shanghai Sixth People’s Hospital. Computed tomography (CT) and three-dimensional reconstruction were preformed for each patient before open reduction and internal fixation. The approaches were instructed by the Three-Column Classification. To test the reproducibility of the Three-Column Classification, the interobserver and intraobserver reliability of this classification system compared with that of the Schatzker Classification was investigated by four observers. RESULTS Fourteen cases could not be classified by Schatzker Classification. Meanwhile, all cases could be classified by the Three-Column Classification. Using plain radiographs, the mean &kgr; values for interobserver reliability using Schatzker Classification systems were 0.567 (range, 0.513–0.589), representing “moderate agreement,” whereas the mean &kgr; values were 0.766 (range, 0.706–0.890), representing “substantial agreement” by the use of the Three-Column Classification based on the CT scan. The mean &kgr; values for intraobserver reliability using Schatzker Classification and the Three-Column Classification based on the CT scan were 0.758 (range, 0.691–0.854) and 0.810 (range, 0.745–0.918), respectively, representing “substantial agreement.” CONCLUSION The Three-Column Classification demonstrates a higher interobserver reliability and can be used as a supplement to the conventional Schatzker Classification, especially in the complex and posterior comminuted tibial plateau fractures. Furthermore, the Three-Column Classification is clinically relevant and, to some degree, can instruct the surgeon in preoperative planning. LEVEL OF EVIDENCE Diagnostic study, level III.

Biomechanical analysis of posteromedial tibial plateau split fracture fixation

The purpose of this study was to compare the biomechanical strength of four different fixation methods for a posteromedial tibial plateau split fracture. Twenty-eight tibial plateau fractures were simulated using right-sided synthetic tibiae models. Each fracture model was randomly instrumented with one of the four following constructs, anteroposterior lag-screws, an anteromedial limited contact dynamic compression plate (LC-DCP), a lateral locking plate, or a posterior T-shaped buttress plate. Vertical subsidence of the posteromedial fragment was measured from 500 N to 1500 N during biomechanical testing, the maximum load to failure was also determined. It was found that the posterior T-shaped buttress plate allowed the least subsidence of the posteromedial fragment and produced the highest mean failure load than each of the other three constructs (P=0.00). There was no statistical significant difference between using lag screws or an anteromedial LC-DCP construct for the vertical subsidence at a 1500 N load and the load to failure (P>0.05). This study showed that a posterior-based buttress technique is biomechanically the most stable in-vitro fixation method for posteromedial split tibial plateau fractures, with AP screws and anteromedial-based LC-DCP are not as stable for this type of fracture.

Updated Three-Column Concept in surgical treatment for tibial plateau fractures - A prospective cohort study of 287 patients.

PURPOSE This study introduces an updated Three-Column Concept for the classification and treatment of complex tibial plateau fractures. A combined preoperative assessment of fracture morphology and injury mechanism is utilized to determine surgical approach, implant placement and fixation sequence. The effectiveness of this updated concept is demonstrated through evaluation of both clinical and radiographic outcome measures. PATIENTS AND METHODS From 2008 to 2012, 355 tibial plateau fractures were treated using the updated Three-Column Concept. Standard radiographic and computed tomography imaging are used to systematically assess and classify fracture patterns as follows: (1) identify column(s) injured and locate associated articular depression or comminution, (2) determine injury mechanism including varus/valgus and flexion/extension forces, and (3) determine surgical approach(es) as well as the location and function of applied fixation. Quality and maintenance of reduction and alignment, fracture healing, complications, and functional outcomes were assessed. RESULTS 287 treated fractures were followed up for a mean period of 44.5 months (range: 22-96). The mean time to radiographic bony union and full weight-bearing was 13.5 weeks (range: 10-28) and 14.8 weeks (range: 10-26) respectively. The average functional Knee Society Score was 93.0 (range: 80-95). The average range of motion of the affected knees was 1.5-121.5°. No significant difference was found in knee alignment between immediate and 18-month post-operative measurements. Additionally, no significant difference was found in functional scores and range of motion between one, two and three-column fracture groups. Twelve patients suffered superficial infection, one had limited skin necrosis and two had wound dehiscence, that healed with nonoperative management. Intraoperative vascular injury occurred in two patients. Fixation of failure was not observed in any of the fractures treated. CONCLUSION An updated Three-Column Concept assessing fracture morphology and injury mechanism in tandem can be used to guide surgical treatment of tibial plateau fractures. Limited results demonstrate successful application of biologically friendly fixation constructs while avoiding fixation failure and associated complications of both simple and complex tibial plateau fractures. LEVEL OF EVIDENCE Level II, prospective cohort study.

A prospective, randomised trial comparing the use of absorbable and metallic screws in the fixation of distal tibiofibular syndesmosis injuries: mid-term follow-up.

Our aim was to compare polylevolactic acid screws with titanium screws when used for fixation of the distal tibiofibular syndesmosis at mid-term follow-up. A total of 168 patients, with a mean age of 38.5 years (18 to 72) who were randomly allocated to receive either polylevolactic acid (n = 86) or metallic (n = 82) screws were included. The Baird scoring system was used to assess the overall satisfaction and functional recovery post-operatively. The demographic details and characteristics of the injury were similar in the two groups. The mean follow-up was 55.8 months (48 to 66). The Baird scores were similar in the two groups at the final follow-up. Patients in the polylevolactic acid group had a greater mean dorsiflexion (p = 0.011) and plantar-flexion of the injured ankles (p < 0.001). In the same group, 18 patients had a mild and eight patients had a moderate foreign body reaction. In the metallic groups eight had mild and none had a moderate foreign body reaction (p < 0.001). In total, three patients in the polylevolactic acid group and none in the metallic group had heterotopic ossification (p = 0.246). We conclude that both screws provide adequate fixation and functional recovery, but polylevolactic acid screws are associated with a higher incidence of foreign body reactions.

Percutaneous screw fixation for the acetabular fracture with quadrilateral plate involved by three-dimensional fluoroscopy navigation: Surgical technique

BACKGROUND The percutaneous three-dimensional (3D)-fluoroscopic-navigated screw directing to the quadrilateral plate was attempted. MATERIALS AND METHODS Five patients with acetabular fractures were treated by 3D navigated percutaneous screw. The quadrilateral plate was involved in all the patients. The Arcadis 3D (ARCADIS Orbic 3D(®); Siemens AG Healthcare Sector, Erlangen, Germany) and computer navigation system (stryker navigation system) were employed, screwing trajectory was attempted to anchor the quadrilateral plate perpendicularly to the fracture line and close to the joint cartilage as much as possible. Parameters including fracture gap closure (P1), distance to the joint cartilage (P2), angulations between the screw and the fracture line (P3), were measured with the software installed on the machine of Arcadis 3D. RESULT Seven screws were inserted with the use of 3D fluoroscopic navigation. The quadrilateral plate was hold by percutaneous screws. The closure of fracture gap was achieved in 3 patients by 2-3mm. The nearest distance from the screw to the joint cartilage was ranged from <1mm to 6mm. The angulations between the screw and the fracture line was 80-90° in three patients, it was 60° and 65° respectively on the rest two patients. All patients felt pain free 1week after the operation. No complication was noted postoperatively. CONCLUSION The surgical technique of percutaneous screwing for the acetabular fracture with three-dimensional fluoroscopy-based navigation was demonstrated.