Consuelo Agulló

Production and Characterization of Monoclonal Antibodies Specific to the Strobilurin Pesticide Pyraclostrobin

Strobilurin fungicides are nowadays among the most important fungicides in the market of active agrochemicals. Pyraclostrobin, which belongs to the last generation of this family of molecules, shows a broader antifungal activity spectrum and higher efficiency and security profiles than previous fungicides. This paper describes the synthesis of functionalized haptens, the production of monoclonal antibodies, and the development of enzyme-linked immunosorbent assays (ELISA) for the detection of pyraclostrobin. A conformational analysis of hapten structure was performed, which provided relevant data concerning the length of the spacer arm. A very useful strategy has been followed for the screening of hybridomas, leading to the selection of a panel of high-affinity monoclonal antibodies to pyraclostrobin. Moreover, different immunoassays have been characterized using the conjugate-coated indirect ELISA format, and limits of detection below 0.1 microg/L have been obtained. Also, a simplified one-step procedure has been carried out with two indirect assays. Finally, these results have been compared with the performance of the same antibodies in the antibody-coated direct ELISA format.

Development of immunoaffinity columns for pyraclostrobin extraction from fruit juices and analysis by liquid chromatography with UV detection

Pyraclostrobin belongs to a new generation of fungicides widely used to preserve high valuable crops. In the present study, three monoclonal antibodies with different affinities to this modern strobilurin have been evaluated for their usefulness in the production of immunoaffinity columns suitable for the solid-phase extraction, concentration, and clean-up of residues from food commodities. Different immunosorbents were produced and characterized in terms of antibody immobilization efficiency, immunosorbent binding capacity, optimum elution conditions, and reusability. Covalent coupling of the antibodies to Sepharose-CNBr gel took place with high yield (over 90%), whereas the immunosorbent efficacy to retain the analyte (from 28 to 68%) was shown to depend on the amount and type of antibody immobilized on the support. As a matter of fact, columns prepared with the monoclonal antibody PYs5#14 were able to selectively bound up to 53 μg of pyraclostrobin per gram of beads. Acetonitrile solutions were preferred over methanolic ones for analyte elution, and some immunosorbents could be reused at least 4-6 times provided that the amount of pyraclostrobin and the volume of sample did not overload the column. Effectiveness of the selected immunoaffinity column was evidenced by the development of an extraction procedure for pyraclostrobin residues from fruit juices and further determination by high-performance liquid chromatography with UV detection. A concentration factor of 50 times was achieved with the developed immunoaffinity column, which eventually resulted in a limit of quantification of 0.01 mg L(-1). Finally, quantitative recoveries were obtained on apple juice and red grape must samples spiked with pyraclostrobin from 0.01 to 1 mg L(-1).

Hapten Synthesis and Monoclonal Antibody-Based Immunoassay Development for Detection of the Fungicide Trifloxystrobin

High-affinity and selective monoclonal antibodies have been produced against the strobilurin fungicide trifloxystrobin. A battery of functionalized haptens has been synthesized, and conjugate-coated enzyme-linked immunosorbent assays following different procedures have been developed. On the one hand, a two-step conjugate-coated immunoassay was optimized using extended or short incubation times, with limits of detection of 0.10 ng/mL for the extended assay and 0.17 ng/mL for the rapid assay. On the other hand, an immunoassay in the conjugate-coated format was optimized following a procedure consisting of just one incubation step. This one-step assay had a limit of detection of 0.21 ng/mL. All of these assays showed detection limits for trifloxystrobin in the low parts per billion range, well below the common maximum residue limits for this pesticide in foodstuffs (50 microg/kg).

Synthesis of site-heterologous haptens for high-affinity anti-pyraclostrobin antibody generation

The design and synthesis of functional chemical derivatives of small organic molecules is usually a key step for the intricate production of a variety of bioconjugates. In this respect, the derivatization site at which the spacer arm is introduced in immunizing conjugates constitutes a highly critical parameter for the generation of high-affinity and selective antibodies. However, due to the usual complexity of the required synthetic procedures, the appropriate comparison of alternative tethering positions has often been neglected. In the present study, meticulous strategies were followed to prepare synthetic derivatives of pyraclostrobin with the same linkers located at diverse rationally-chosen sites. Activity appraisal of antibodies and bioconjugates was carried out by bidimensional competitive direct and indirect immunoassays, and a superior performance of two of the three synthesized haptens was found. Finally, a detailed analysis of the conformations of the target molecule and the synthesized haptens in aqueous solution was done using computer assisted molecular modeling techniques. This study suggested that the lower titers and affinities of one set of antibodies are most probably due to conformational effects of the spacer arm in the immunizing bioconjugate.

Generation of anti-azoxystrobin monoclonal antibodies from regioisomeric haptens functionalized at selected sites and development of indirect competitive immunoassays

Azoxystrobin is a modern strobilurin fungicide used around the world to combat prime diseases affecting highly valuable crops. Accordingly, residues of this chemical are frequently found in food, even though mostly under maximum tolerated levels. We herein describe the development of an indirect competitive immunoassay for the determination of azoxystrobin residues. A panel of monoclonal antibodies displaying subnanomolar affinity to azoxystrobin was generated using, as immunizing haptens in mice, four functionalized derivatives carrying the same spacer arm located at different rationally chosen positions. This collection of antibodies was thoroughly characterized with homologous and heterologous antigens, and the immunoassay consisting of monoclonal antibody AZo6#49 and the coating conjugate OVA-AZb6, which displayed an IC(50) value of 0.102 μg L(-1) and a LOD of 0.017 μg L(-1), was eventually optimized. The response to different pH and ionic strength conditions of the specific assay was studied using a biparametric approach. In addition, the influence of Tween 20 and organic solvents over the assay parameters was also evaluated. After optimization, the developed immunochemical assay was applied to the analysis of azoxystrobin in spiked juices of relevant fruits and vegetables, showing excellent recoveries between 2 and 500 μg L(-1).

Hapten synthesis and polyclonal antibody-based immunoassay development for the analysis of forchlorfenuron in kiwifruit.

High-affinity polyclonal antibodies directed against the synthetic cytokinin forchlorfenuron (CPPU) were produced from three immunizing haptens with equivalent spacer arms located at different positions. A competitive immunoassay was developed with a limit of detection in buffer of 12.42 +/- 3.06 ng/L. In addition, the ability of the produced antibodies to recognize a set of synthetic CPPU analogues was studied. It was evidenced that the linker position had a strong impact on the specificity of the generated polyclonals, which were more sensitive to changes at moieties of the target analyte located furthest from the derivatization site of the immunogen. Finally, matrix effects of gold and green kiwifruit over assay parameters were evaluated. Excellent recoveries and low coefficients of variation were found with just a 100-fold dilution of the sample in buffer, hence indicating the effectiveness of the developed immunoassay as an analytical tool for monitoring this agrochemical in kiwifruit samples.

Forchlorfenuron-mimicking haptens: from immunogen design to antibody characterization by hierarchical clustering analysis.

To obtain highly-specific and selective forchlorfenuron binders, a collection of functionalized derivatives with different spacer arm locations and lengths was prepared. By immunization with target-mimicking haptens, a large battery of monoclonal and polyclonal antibodies against this synthetic cell regulator was produced and exhaustively characterized in two immunoassay formats using homologous and heterologous conjugates. Antibodies with IC(50) values lower than 0.3 nM were successfully raised from the prepared immunogens, thus evidencing the efficacy of the explored strategies. In order to identify significant epitopes in the antibody-antigen interaction, a series of new chemical forchlorfenuron analogues, with slight modifications at both rings of the target molecule, were synthesized and evaluated in competitive assays. As a novel approach in hapten recognition studies, data processing was performed by computational classification methods based on hierarchical clustering. This strategy was shown to be highly valuable for a straightforward profiling of antibodies according to analogue recognition patterns. A relationship could be established between the antigen binding properties of antibodies and the structure of the immunogen. Whereas antibodies with equivalent affinities had been obtained from all of the derivatives, their specificity was found to be largely influenced by the differential exposition of the molecule to the immune system.

Production and Characterization of Monoclonal and Polyclonal Antibodies to Forchlorfenuron

The development of immunoassays for the detection of the plant growth regulator forchlorfenuron (CPPU) is described. To achieve that purpose, a set of CPPU derivatives has been obtained by the previous synthesis of the adequate p-aminophenyl alkanoic acid. Protein conjugates of these compounds have been used as immunogens to produce rabbit polyclonal antibodies and a collection of mouse monoclonal antibodies. Additionally, a battery of structural analogues of the target analyte has been synthesized and used for the characterization of antibody binding. This strategy has demonstrated that most antibodies followed Landsteiners principle, although some monoclonal antibodies showing important deviations from this behavior have also been found. Finally, different assay formats have been developed with a variety of antibodies and conjugates, and a rapid procedure has been optimized for the indirect ELISA format using monoclonal and polyclonal antibodies. In the indirect competitive ELISA, assay IC50 values for CPPU below 0.5 nM were found with LODs as low as 0.013 nM.

Stereoselective synthesis of polyoxygenated atisane-type diterpenoids

Abstract A new stereoselective approach to polyoxygenated atisane-type diterpenes starting from (S)-(+)-carvone is described. The key steps involve an intramolecular Diels–Alder reaction, an unusual intramolecular diazo ketone cyclopropanation of an unsaturated ketone, and a regioselective endocyclic cleavage of a cyclopropyl carbinyl radical as key synthetic steps. The synthesis of the bioactive polyoxygenated atisanes atis-16(17)-en-3,14-dione ( 2 ) and 3R-hydroxy-atis-16(17)-en-2,14-dione ( 3 ) following this approach is presented.

Hapten synthesis and monoclonal antibody-based immunoassay development for the detection of the fungicide kresoxim-methyl.

Strobilurin fungicides have been increasingly used for fungus pest control since they were introduced in 1996. For pesticide residue detection, immunoassays constitute nowadays a valuable approach. This paper describes the synthesis of functionalized haptens of kresoxim-methyl, the production of monoclonal antibodies, and the development of enzyme-linked immunosorbent assays. On the one hand, a two-step conjugate-coated immunoassay was optimized using extended or short incubation times, with limits of detection of 0.4 ng/mL for the extended assay and 0.3 ng/mL for the rapid assay. On the other hand, an immunoassay was optimized following a procedure consisting of just one incubation step. This one-step assay had a limit of detection of 0.4 ng/mL. All of these assays showed a similar performance, with sensitivities well below common maximum residue limits for this pesticide (50 microg/kg) and lower than the detection limits of the usual chromatographic detection methods.