Cordula Hirsch

Effects of carbon nanotubes on primary neurons and glial cells

Carbon nanotubes (CNTs) are among the most promising novel nanomaterials and their unique chemical and physical properties suggest an enormous potential for many areas of research and applications. As a consequence, the production of CNT-based material and thus the occupational and public exposure to CNTs will increase steadily. Although there is evidence that nanoparticles (NPs) can enter the nervous system via the blood stream, olfactory nerves or sensory nerves in the skin, there is still only little knowledge about possible toxic effects of CNTs on cells of the nervous system. The goal of the present study was to analyse the influences of single-walled CNTs (SWCNTs) with different degrees of agglomeration on primary cultures derived from chicken embryonic spinal cord (SPC) or dorsal root ganglia (DRG). As measured by the Hoechst assay treatment of mixed neuro-glial cultures with up to 30mug/mL SWCNTs significantly decreased the overall DNA content. This effect was more pronounced if cells were exposed to highly agglomerated SWCNTs as compared to better dispersed SWCNT-bundles. Using a cell-based ELISA we found that SWCNTs reduce the amount of glial cells in both peripheral nervous system (PNS) and central nervous system (CNS) derived cultures. Neurons were only affected in DRG derived cultures, where SWCNT treatment resulted in a decreased number of sensory neurons, as measured by ELISA. Additionally, whole-cell patch recordings revealed a diminished inward conductivity and a more positive resting membrane potential of SWCNT treated DRG derived neurons compared to control samples. The SWCNT suspensions used in this study induced acute toxic effects in primary cultures from both, the central and peripheral nervous system of chicken embryos. The level of toxicity is at least partially dependent on the agglomeration state of the tubes. Thus if SWCNTs can enter the nervous system at sufficiently high concentrations, it is likely that adverse effects on glial cells and neurons might occur.

In vitro mechanistic study towards a better understanding of ZnO nanoparticle toxicity.

Abstract ZnO nanoparticles (NPs) elicit significant adverse effects in various cell types, organisms and in the environment. The toxicity of nanoscale ZnO has often been ascribed to the release of zinc ions from the NPs but it is not yet understood to which extent these ions contribute to ZnO NP toxicity and what are the underlying mechanisms. Here, we take one step forward by demonstrating that ZnO-induced Jurkat cell death is largely an ionic effect involving the extracellular release of high amounts of Zn(II), their rapid uptake by the cells and the induction of a caspase-independent alternative apoptosis pathway that is independent of the formation of ROS. In addition, we identified novel coating strategies to reduce ZnO NP dissolution and subsequent adverse effects.

Nanomaterial cell interactions: are current in vitro tests reliable?

New properties of engineered nanomaterials raise great expectations for industrial, scientific as well as medical applications. At the same time concerns among consumers regarding the safety aspects of this new technology emerge. Furthermore, among the multitude of published studies, a considerable number do not reveal reliable data. Thus, standardized, validated, reliable, robust, reproducible and intelligent testing strategies are urgently needed that address nanomaterial toxicity. This article discusses the reliability of currently used in vitro toxicity assays. It covers major problems, pitfalls and challenges of assay performance and validation. We recommend a series of different controls to improve the experimental quality and, thus, also the reliability and reproducibility of current in vitro systems. These recommendations consequently applied in the future will increase the safe and sustainable use of nanotechnology.

Use of Cause-and-Effect Analysis to Design a High-Quality Nanocytotoxicology Assay

An important consideration in developing standards and regulations that govern the production and use of commercial nanoscale materials is the development of robust and reliable measurements to monitor the potential adverse biological effects of such products. These measurements typically require cell-based and other biological assays that provide an assessment of the risks associated with the nanomaterial of interest. In this perspective, we describe the use of cause-and-effect (C&E) analysis to design robust, high quality cell-based assays to test nanoparticle-related cytotoxicity. C&E analysis of an assay system identifies the sources of variability that influence the test result. These sources can then be used to design control experiments that aid in establishing the validity of a test result. We demonstrate the application of C&E analysis to the commonly used 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) cell-viability assay. This is the first time to our knowledge that C&E analysis has been used to characterize a cell-based toxicity assay. We propose the use of a 96-well plate layout which incorporates a range of control experiments to assess multiple factors such as nanomaterial interference, pipetting accuracy, cell seeding density, and instrument performance, and demonstrate the performance of the assay using the plate layout in a case study. While the plate layout was formulated specifically for the MTS assay, it is applicable to other cytotoxicity, ecotoxicity (i.e., bacteria toxicity), and nanotoxicity assays after assay-specific modifications.

Comparability of in Vitro Tests for Bioactive Nanoparticles: A Common Assay to Detect Reactive Oxygen Species as an Example

The release of reactive oxygen species (ROS) during the electron transport of mitochondrial aerobic respiration is the major source of ROS. However, contact between cells and nanoparticles (NPs) can also induce release of ROS, leading to an imbalance towards the pro-oxidative state. At low levels of ROS production, cells initiate a protective response to guarantee their survival, but an excess of ROS can damage cellular compounds such as membranes and various organelles, or directly cause genotoxicity. Thus an elevated level of ROS is an important indicator of cellular stress and an accurate recording of this parameter would be very informative. ROS can be measured by various assays, but all known assays measuring and quantifying ROS possess certain weaknesses. The problems and challenges of quantitatively detecting ROS in vitro using the 2′,7′-dichlorodihydrofluorescein (DCF) assay is discussed as an example. In addition, we debate the difficulties in finding a suitable and stable chemical reaction control for the DCF assay (or other ROS-detecting assays). As a conclusion, we believe that using 3-morpholinosydnonimine hydrochloride (Sin-1) as a ROS inducer in the DCF assay is feasible only qualitatively. However, a quantitative measurement of the absolute amount of ROS produced and a quantitative comparison between experiments is (at the moment) impossible.

Few-Layer Graphene Shells and Nonmagnetic Encapsulates: A Versatile and Nontoxic Carbon Nanomaterial

In this work a simple and scalable approach to coat nonmagnetic nanoparticles with few-layer graphene is presented. In addition, the easy processing of such nanoparticles to remove their core, leaving only the 3D graphene nanoshell, is demonstrated. The samples are comprehensively characterized, as are their versatility in terms of functionalization and as a material for electrochemical storage. Indeed, these 3D graphene nanostructures are easily functionalized much as is found with carbon nanotubes and planar graphene. Electrochemical investigations indicate these nanostructures are promising for stable long-life battery applications. Finally, initial toxicological investigations suggest no acute health risk from these 3D graphene nanostructures.

Preparation of ellipsoid-shaped supraparticles with modular compositions and investigation of shape-dependent cell-uptake

Hybrid colloidal supraparticles often show a superior performance in catalysis, optics and biomedicine thanks to the synergistic effect of the ensemble of their single nanoparticle building blocks. Despite the emerging importance of shape-dependent properties of nanostructures, the synthesis of supraparticles is generally limited to a spherical shape. Here, a broadly applicable method is presented for the fabrication of ellipsoid supraparticles from one or several types of inorganic nanoparticles in various compositions. The method is highly versatile and modular, allowing free choice of hydrophobic nanoparticles to combine desired properties in the resulting supraparticles. A representative series of ellipsoid-shaped supraparticles is fabricated and their morphology, hybrid structure and composition as well as their functional properties are investigated. All employed nanoparticle types are successfully incorporated resulting in ellipsoid-shaped supraparticles with largely homogeneous intra- and interparticular distribution of the different nanoparticle building blocks. A biological assessment of iron oxide ellipsoid supraparticles reveals no safety issues but a pronounced lower cellular uptake compared to spherical ones. This distinct shape–property relationship illustrates the importance of the supraparticle shape as a parameter for the rational design of nanosystems for biomedical applications.

Release of copper-amended particles from micronized copper-pressure-treated wood during mechanical abrasion

BackgroundWe investigated the particles released due to abrasion of wood surfaces pressure-treated with micronized copper azole (MCA) wood preservative and we gathered preliminary data on its in vitro cytotoxicity for lung cells. The data were compared with particles released after abrasion of untreated, water (0% MCA)-pressure-treated, chromated copper (CC)-pressure-treated wood, and varnished wood. Size, morphology, and composition of the released particles were analyzed.ResultsOur results indicate that the abrasion of MCA-pressure-treated wood does not cause an additional release of nanoparticles from the unreacted copper (Cu) carbonate nanoparticles from of the MCA formulation. However, a small amount of released Cu was detected in the nanosized fraction of wood dust, which could penetrate the deep lungs. The acute cytotoxicity studies were performed on a human lung epithelial cell line and human macrophages derived from a monocytic cell line. These cell types are likely to encounter the released wood particles after inhalation.ConclusionsOur findings indicate that under the experimental conditions chosen, MCA does not pose a specific additional nano-risk, i.e. there is no additional release of nanoparticles and no specific nano-toxicity for lung epithelial cells and macrophages.

Size and time dependent internalization of label-free nano-graphene oxide in human macrophages

Graphene oxide shows great promise as a material for biomedical applications, e.g., as a multi-drug delivery platform. With this in view, reports of studies on the interaction between nanosized graphene oxide flakes and biological cells are beginning to emerge. However, the number of studies remains limited, and most used labeled graphene oxide samples to track the material upon endocytosis. Unfortunately, the labeling process alters the surface functionality of the graphene oxide, and this additional functionalization has been shown to alter the cellular response. Hence, in this work we used label-free graphene oxide. We carefully tracked the uptake of three different nanoscale graphene oxide flake size distributions using scanning/transmission electron microscopy. Uptake was investigated in undifferentiated human monocyte cells (THP-1) and differentiated macrophage cells. The data show clear size dependence for uptake, such that larger graphene oxide flakes (and clusters) are more easily taken up by the cells compared to smaller flakes. Moreover, uptake is shown to occur very rapidly, within two min of incubation with THP-1 cells. The data highlights a crucial need for cellular incubation studies with nanoparticles, to be conducted for short incubation periods as certain dependencies (e.g., size and concentration) are lost with longer incubation periods.

Catechin loaded PLGA submicron-sized fibers reduce levels of reactive oxygen species induced by MWCNT in vitro

Graphical abstract Figure. No Caption available. Abstract Reactive oxygen species (ROS) are common products of normal aerobic cellular metabolism, but high levels of ROS lead to oxidative stress and cellular damage. Therefore, effective antioxidant therapies are needed to prevent ROS overproduction. This study reports the development of poly(l‐lactide‐co‐glycolide) (PLGA) bicomponent fibers loaded with selected amounts of the natural polyphenolic antioxidant catechin. Thereby a novel route based on emulsion electrospinning is investigated to obtain tailored and sustained release rates for chatechin. The activity of the released catechin was assessed for its influence on multi‐walled carbon nanotube (MWCNT) induced formation of reactive oxygen species (ROS) in the human alveolar epithelial the cell line A549. Homogenous fiber morphologies were obtained at specified ranges of PLGA concentrations within the emulsions including the formation of a core – sheath structure localizing the drug within the fiber core. In vitro measurements of the delivery showed moderate burst release kinetics in a first phase followed by a linear and smooth release at long term. In combination with polymer degradation studies a mostly diffusion controlled release mechanism was revealed exhibiting only marginal degradation of the polymer during the time span of the drug delivery. As a proof of concept, the activity of released catechin in A549 cells stimulated with MWCNTs was determined and revealed a high reduction of ROS production in a dose dependent manner. This effect diminishes over time indicating a depletion of catechin.