Courtney M. Donahue

Impact of Coordination Geometry, Bite Angle, and Trans Influence on Metal–Ligand Covalency in Phenyl-Substituted Phosphine Complexes of Ni and Pd

Despite the long-standing use of phosphine and diphosphine ligands in coordination chemistry and catalysis, questions remain as to their effects on metal-ligand bonding in transition metal complexes. Here we report ligand K-edge XAS, DFT, and TDDFT studies aimed at quantifying the impact of coordination geometry, diphosphine bite angle, and phosphine trans influence on covalency in M-P and M-Cl bonds. A series of four-coordinate NiCl2 and PdCl2 complexes containing PPh3 or Ph2P(CH2)nPPh2, where n = 1 (dppm), 2 (dppe), 3 (dppp), and 4 (dppb), was analyzed. The XAS data revealed that changing the coordination geometry from tetrahedral in Ni(PPh3)2Cl2 (1) to square planar in Ni(dppe)Cl2 (2) more than doubles the intensity of pre-edge features assigned to Ni-P and Ni-Cl 1s → σ* transitions. By way of comparison, varying the diphosphine in Pd(dppm)Cl2 (4), Pd(dppp)Cl2 (6), and Pd(dppb)Cl2 (7) yielded Pd-P 1s → σ* transitions with identical intensities, but a 10% increase was observed in the P K-edge XAS spectrum of Pd(dppe)Cl2 (5). A similar observation was made when comparing Ni(dppe)Cl2 (2) to Ni(dppp)Cl2 (3), and DFT and TDDFT calculations corroborated XAS results obtained for both series. Comparison of the spectroscopic and theoretical results to the diphosphine structures revealed that changes in M-P covalency were not correlated to changes in bite angles or coordination geometry. As a final measure, P and Cl K-edge XAS data were collected on trans-Pd(PPh3)2Cl2 (8) for comparison to the cis diphosphine complex Pd(dppe)Cl2 (5). Consistent with phosphines stronger trans influence compared to chloride, a 35% decrease in the intensity of the Pd-P 1s → σ* pre-edge feature and a complementary 34% increase in Pd-Cl 1s → σ* feature was observed for 8 (trans) compared to 5 (cis). Overall, the results reveal how coordination geometry, ligand arrangement, and diphosphine structure affect covalent metal-phosphorus and metal-chloride bonding in these late transition metal complexes.

Sulfur K-edge X-ray absorption spectroscopy and time-dependent density functional theory of arsenic dithiocarbamates

S K-edge X-ray absorption spectroscopy (XAS) and time-dependent density functional theory (TDDFT) calculations were performed on a series of As[S2CNR2]3 complexes, where R2 = Et2, (CH2)5 and Ph2, to determine how dithiocarbamate substituents attached to N affect As[S2CNR2]3 electronic structure. Complimentary [PPh4][S2CNR2] salts were also studied to compare dithiocarbamate bonding in the absence of As. The XAS results indicate that changing the orientation of the alkyl substituents from trans to cis (R2 = Et2vs. (CH2)5) yields subtle variations whereas differences associated with a change from alkyl to aryl are much more pronounced. For example, despite the differences in As 4p mixing, the first features in the S K-edge XAS spectra of [PPh4][S2CNPh2] and As[S2CNPh2]3 were both shifted by 0.3 eV compared to their alkyl-substituted derivatives. DFT calculations revealed that the unique shift observed for [PPh4][S2CNPh2] is due to phenyl-induced splitting of the π* orbitals delocalized over N, C and S. A similar phenomenon accounts for the shift observed for As[S2CNPh2]3, but the presence of two unique S environments (As-S and As···S) prevented reliable analysis of As-S covalency from the XAS data. In the absence of experimental values, DFT calculations revealed a decrease in As-S orbital mixing in As[S2CNPh2]3 that stems from a redistribution of electron density to S atoms participating in weaker As···S interactions. Simulated spectra obtained from TDDFT calculations reproduce the experimental differences in the S K-edge XAS data, which suggests that the theory is accurately modeling the experimental differences in As-S orbital mixing. The results highlight how S K-edge XAS and DFT can be used cooperatively to understand the electronic structure of low symmetry coordination complexes containing S atoms in different chemical environments.

Solid energy calibration standards for P K-edge XANES: electronic structure analysis of PPh4Br

P K-edge X-ray absorption near-edge structure (XANES) spectroscopy is a powerful method for analyzing the electronic structure of organic and inorganic phosphorus compounds. Like all XANES experiments, P K-edge XANES requires well defined and readily accessible calibration standards for energy referencing so that spectra collected at different beamlines or under different conditions can be compared. This is especially true for ligand K-edge X-ray absorption spectroscopy, which has well established energy calibration standards for Cl (Cs2CuCl4) and S (Na2S2O3·5H2O), but not neighboring P. This paper presents a review of common P K-edge XANES energy calibration standards and analysis of PPh4Br as a potential alternative. The P K-edge XANES region of commercially available PPh4Br revealed a single, highly resolved pre-edge feature with a maximum at 2146.96 eV. PPh4Br also showed no evidence of photodecomposition when repeatedly scanned over the course of several days. In contrast, we found that PPh3 rapidly decomposes under identical conditions. Density functional theory calculations performed on PPh3 and PPh4+ revealed large differences in the molecular orbital energies that were ascribed to differences in the phosphorus oxidation state (III versus V) and molecular charge (neutral versus +1). Time-dependent density functional theory calculations corroborated the experimental data and allowed the spectral features to be assigned. The first pre-edge feature in the P K-edge XANES spectrum of PPh4Br was assigned to P 1s → P-C π* transitions, whereas those at higher energy were P 1s → P-C σ*. Overall, the analysis suggests that PPh4Br is an excellent alternative to other solid energy calibration standards commonly used in P K-edge XANES experiments.

Measurement of Diphosphine σ-Donor and π-Acceptor Properties in d0 Titanium Complexes Using Ligand K-Edge XAS and TDDFT

Diphosphines are highly versatile ancillary ligands in coordination chemistry and catalysis because their structures and donor-acceptor properties can vary widely depending on the substituents attached to phosphorus. Experimental and theoretical methods have been developed to quantify differences in phosphine and diphosphine ligand field strength, but experimentally measuring individual σ-donor and π-acceptor contributions to metal-phosphorus bonding remains a formidable challenge. Here we report P and Cl K-edge X-ray absorption spectroscopy (XAS), density functional theory (DFT), and time-dependent density functional theory (TDDFT) studies of a series of [Ph2P(CH2) nPPh2]TiCl4 complexes, where n = 1, 2, or 3. The d0 metal complexes (Ti4+) revealed both P 1s → Ti-P π and P 1s → Ti-P σ* transitions in the P K-edge XAS spectra, which allowed spectral changes associated with Ti-P σ-bonding and π-backbonding to be evaluated as a function of diphosphine alkane length. DFT and TDDFT calculations were used to assign and quantify changes in Ti-P σ-bonding and π-backbonding. The calculated results for [Ph2P(CH2)2PPh2]TiCl4 were subsequently compared to electronic structure calculations and simulated spectra for [R2P(CH2)2PR2]TiCl4, where R = cyclohexyl or CF3, to evaluate spectral changes as a function of diphosphine ligand field strength. Collectively, our results demonstrate how P K-edge XAS can be used to experimentally measure M-P π-backbonding with a d0 metal and corroborate earlier studies showing that relative changes in covalent M-P σ bonding do not depend solely on changes in diphosphine bite angle.

Ligand K-Edge XAS Studies of Metal-Phosphorus Bonds: Applications, Limitations, and Opportunities

Phosphorus K-edge X-ray absorption spectroscopy (XAS) is a highly effective experimental method for investigating metal-phosphorus bonding and electronic structure. Here, we provide a comprehensive review of P K-edge XAS studies of transition metal complexes and show how they were used to investigate a wide range of chemical phenomena, including covalent metal-ligand bonding, redox non-innocence in ligands, molecular magnetism, and luminescence. Limitations of the technique are discussed along with opportunities for future work.