Cristina Locatelli

Observing the oxidation state turnover in heterogeneous iridium-based water oxidation catalysts

In this work the oxidation states assumed by Ir in oxide systems used as heterogeneous catalysts for water oxidation are determined by means of in situ X-ray Absorption Spectroscopy (XAS). Using a highly hydrated iridium oxide film allows the maximum number of Ir sites to be involved in the electrochemical processes occurring at the catalysts during water oxidation (oxygen evolution reaction, OER). X-ray Absorption Near Edge Structure (XANES) spectra clearly indicate the co-existence of Ir(III) and Ir(V) at the electrode potentials where OER occurs. This represents a fundamental step both in the understanding of the water oxidation mechanism catalysed by heterogeneous Ir oxide systems, and in the possible tailoring of electrocatalysts for OER.

IrO2-based disperse-phase electrocatalysts: a complementary study by means of the cavity-microelectrode and ex-situ X-ray absorption spectroscopy.

In this work, IrO(2)-based powders are screened by cyclic voltammetry for the determination of the electrochemical active sites and for the qualitative evaluation of the iridium atoms speciation. All results are obtained using a cavity-microelectrode as powder holder, thus exploiting the features of this innovative tool, whose best potentialities have been recently introduced by our group. All the studied materials have been prepared by the sol-gel technique and differ in calcination temperature and method of mixing the metal oxide precursors. The electrochemical results are complemented with the information obtained by X-ray absorption spectroscopy (XAS), that give insights on the local structure of each selected sample, confirming the trends found by cyclic voltammetry and give new and unexpected insights on the powder structural features.

Fixed energy X-ray absorption voltammetry.

In this paper, the fixed energy X-ray absorption voltammetry (FEXRAV) is introduced. FEXRAV represents a novel in situ X-ray absorption technique for fast and easy preliminary characterization of electrode materials and consists of recording the absorption coefficient at a fixed energy while varying at will the electrode potential. The energy is chosen close to an X-ray absorption edge, in order to give the maximum contrast between different oxidation states of an element. It follows that any shift from the original oxidation state determines a variation of the absorption coefficient. Although the information given by FEXRAV obviously does not supply the detailed information of X-ray absorption near edge structure (XANES) or extended X-ray absorption fine structure (EXAFS), it allows to quickly map the oxidation states of the element under consideration within the selected potential windows. This leads to the rapid screening of several systems under different experimental conditions (e.g., nature of the electrolyte, potential window) and is preliminary to more deep X-ray absorption spectroscopy (XAS) characterizations, like XANES or EXAFS. In addition, the time-length of the experiment is much shorter than a series of XAS spectra and opens the door to kinetic analysis.

Designing materials by means of the cavity-microelectrode: the introduction of the quantitative rapid screening toward a highly efficient catalyst for water oxidation

In this paper, we introduce the concept and the methodology of quantitative rapid screening (QRS) of catalysts. It is based on the use of the cavity-microelectrode (C-ME), a tool that hosts a known amount of powder and can be filled and emptied quickly, thus allowing the quantitative, rapid, fine characterization of different materials. Here, C-MEs are used for selecting a suitable material to be used as electrocatalyst for the oxygen evolution reaction (water oxidation) in acidic environment, a key process for the majority of the industrial electrolytic applications including the production of high purity hydrogen. A matrix of materials, each having the same low iridium oxide content, is quantitatively screened for finding the most promising one. C-MEs allowed us to measure the effective number of active Ir sites and their surface concentration. The success of this strategy is proven by the good performance of the “best” material when tested in a proton exchange membrane water electrolyzer, that allowed high hydrogen fluxes at a low cell potential (∼4000 dm3 h−1 m−2 at less than 1.9 V).

3D-printed photo-spectroelectrochemical devices for in situ and in operando X-ray absorption spectroscopy investigation

Three-dimensional printed multi-purpose electrochemical devices for X-ray absorption spectroscopy are presented in this paper. The aim of this work is to show how three-dimensional printing can be a strategy for the creation of electrochemical cells for in situ and in operando experiments by means of synchrotron radiation. As a case study, the description of two cells which have been employed in experiments on photoanodes for photoelectrochemical water splitting are presented. The main advantages of these electrochemical devices are associated with their compactness and with the precision of the three-dimensional printing systems which allows details to be obtained that would otherwise be difficult. Thanks to these systems it was possible to combine synchrotron-based methods with complementary techniques in order to study the mechanism of the photoelectrocatalytic process.

Benzyl Chloride Electroreduction on Ag Cathodes in CH3CN in the Presence of Small Amounts of Water: Evidences of Quantitative Effects on Reaction Rates and Mechanism

In this work, we show our most recent results on the reductive dehalogenation of organic chlorides in acetonitrile + water media on silver electrodes, whose impressive catalytic power toward this reaction have already been extensively demonstrated and discussed. We adopt benzyl chloride as model molecule because of its wide use in previous literature. The results show that the presence of increasing amount of water to pure acetonitrile deeply and quantitatively modifies not only the peak potential (and thus the apparent reaction kinetics) but also the reaction mechanism.

The Influence of Carbonaceous Matrices and Electrocatalytic MnO2 Nanopowders on Lithium-Air Battery Performances

Here, we report new gas diffusion electrodes (GDEs) prepared by mixing two different pore size carbonaceous matrices and pure and silver-doped manganese dioxide nanopowders, used as electrode supports and electrocatalytic materials, respectively. MnO2 nanoparticles are finely characterized in terms of structural (X-ray powder diffraction (XRPD), energy dispersive X-ray (EDX)), morphological (SEM, high-angle annular dark field (HAADF)-scanning transmission electron microscopy (STEM)/TEM), surface (Brunauer Emmet Teller (BET)-Barrett Joyner Halenda (BJH) method) and electrochemical properties. Two mesoporous carbons, showing diverse surface areas and pore volume distributions, have been employed. The GDE performances are evaluated by chronopotentiometric measurements to highlight the effects induced by the adopted materials. The best combination, hollow core mesoporous shell carbon (HCMSC) with 1.0% Ag-doped hydrothermal MnO2 (M_hydro_1.0%Ag) allows reaching very high specific capacity close to 1400 mAh·g−1. Considerably high charge retention through cycles is also observed, due to the presence of silver as a dopant for the electrocatalytic MnO2 nanoparticles.

In Situ Dispersive EXAFS in Electrocatalysis: The Investigation of the Local Structure of IrOx in Chronoamperometric Conditions as a Case Study

An in situ study with dispersive EXAFS (Extended X-Ray Absorption Spectroscopy) at the Ir- edge is performed to characterize Electrodeposited Iridium Oxide Films (EIROF) under chronoamperometric conditions. The technique monitors the local chemical environment and electronic structure of iridium during the oxidation of Ir(III) to Ir(IV) with a time resolution of milliseconds. The study is performed in both acidic and basic media. The Fourier transforms of the time-resolved EXAFS signals clearly show that the short-range structure of Ir is similar to that of rutile-type IrO2 and is maintained during the reaction, thus accounting for the flexibility of the structure of the electrode material in accommodating different oxidation states. From a more general point of view, the work demonstrates the capabilities of in situ experiments based on state-of-the-art dispersive EXAFS in clarifying the mechanistic aspects of electrochemical processes.

Structure and Stability of a Copper(II) Lactate Complex in Alkaline Solution: a Case Study by Energy-Dispersive X-ray Absorption Spectroscopy

Energy-dispersive X-ray absorption spectroscopy was applied, aimed at solving the problem of the structure and stability of a copper(II) lactate complex in alkaline solution, used as a precursor for the electrodeposition of Cu2O. The application of multiple scattering calculations to the simulation of the X-ray absorption near-edge structure part of the spectra allowed an accurate resolution of the structure: the copper(II) cation is surrounded by four lactate ions in a distorted tetrahedral environment, with the lactate anions acting as monodentate ligands. This results in an atomic arrangement where copper is surrounded by four oxygen atoms located at quite a short distance (ca. 1.87 Å) and four oxygen atoms located quite far apart (ca. 3.1-3.2 Å). The complex was finally found to be stable in a wide range of applied potentials.