Curtis Guild

Understanding the Role of Gold Nanoparticles in Enhancing the Catalytic Activity of Manganese Oxides in Water Oxidation Reactions

The Earth-abundant and inexpensive manganese oxides (MnOx) have emerged as an intriguing type of catalysts for the water oxidation reaction. However, the overall turnover frequencies of MnOx catalysts are still much lower than that of nanostructured IrO2 and RuO2 catalysts. Herein, we demonstrate that doping MnOx polymorphs with gold nanoparticles (AuNPs) can result in a strong enhancement of catalytic activity for the water oxidation reaction. It is observed that, for the first time, the catalytic activity of MnOx/AuNPs catalysts correlates strongly with the initial valence of the Mn centers. By promoting the formation of Mn(3+) species, a small amount of AuNPs (<5%) in α-MnO2/AuNP catalysts significantly improved the catalytic activity up to 8.2 times in the photochemical and 6 times in the electrochemical system, compared with the activity of pure α-MnO2.

Heterogeneous acidic TiO2 nanoparticles for efficient conversion of biomass derived carbohydrates

Selective conversion of biomass derived carbohydrates into fine chemicals is of great significance for the replacement of petroleum feedstocks and the reduction of environmental impacts. Levulinic acid, 5-hydroxymethyl furfural (HMF) and their derivatives are recognized as important precursor candidates in a variety of different areas. In this study, the synthesis, characterization, and catalytic activity of acidic TiO2 nanoparticles in the conversion of biomass derived carbohydrates were explored. This catalyst was found to be highly effective for selective conversion to value-added products. The nanoparticles exhibited superior activity and selectivity towards methyl levulinate from fructose in comparison to current commercial catalysts. The conversion of fructose to methyl levulinate was achieved with 80% yield and high selectivity (up to 80%). Additionally, conversions of disaccharides and polysaccharides were studied. Further, the production of versatile valuable products such as levulinic esters, HMF, and HMF-derived ethers was demonstrated using the TiO2 nano-sized catalysts in different solvent systems.

Tunable mesoporous manganese oxide for high performance oxygen reduction and evolution reactions

Understanding the origin of manganese oxide activity for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is a key step towards rationally designing of highly active catalysts capable of competing with the widely used, state-of-art noble metal catalysts. Herein, we present a bifunctional, thermally stable cesium-promoted mesoporous manganese oxide (Cs-MnOx) tuned by simple heat treatment from an amorphous to a crystalline phase with controlled surface and bulk active Mn centers. The Cs-MnOx material exhibited the highest ORR activity (0.87 V vs. RHE at −3 mA cm−2) among all noble-metal-free manganese oxide catalysts reported to date with superior activity compared to state-of-the-art Pt/C catalyst. In addition, Cs-MnOx exhibited comparable OER performance with the highly active Ir/C and RuO2 catalysts. Extensive characterization and density functional theory (DFT) computations suggested that the stabilization of the surface and bulk enriched Mn3+ species, increase of relative basicity and maintaining active crystalline phase due to Cs incorporation, are the main decisive factors for the profound ORR and OER activities. Findings from our study provide general guidance for designing of cost effective and active metal oxide based electrocatalysts.

Potassium modified layered Ln2O2CO3 (Ln: La, Nd, Sm, Eu) materials: efficient and stable heterogeneous catalysts for biofuel production.

Potassium modified layered Ln2O2CO3 (Ln: La, Nd, Sm, Eu) biodiesel catalysts were prepared by a coprecipitation method followed by an overnight reflux. A high fatty acid methyl ester (FAME) yield (>95%) was achieved under mild reaction conditions (<100 °C). The FAME yields were investigated as a function of temperature and catalyst weight percentage. Nd2O2CO3 shows a better catalytic performance with a higher reaction rate than the industrial homogeneous KOH catalyst using both microwave irradiation and conventional heating methods. Approximately 100% FAME yield can be reached at 95 °C (microwave radiation) by 1.0 wt% Nd2O2CO3 within 10 min, while the same yield can be reached by 3.0 wt% Nd2O2CO3 at 95 °C (conventional heating method). In addition, leaching tests of the catalysts were performed; no leached rare earth metal ions were detected and the amounts of leached potassium were all under 5 ppm (ASTM standard). The synthesized layered Ln2O2CO3 materials offer a group of ideal alternative catalysts for industrial biodiesel production.

Multiblock thermoplastic elastomers via one-pot thiol–ene reaction

We report a facile approach to designing multiblock thermoplastic elastomers using a two-step thiol–ene polyaddition reaction. It is based on the utilization of intermolecular hydrogen bonding of widely available and cost-effective monomer of N,N′-methylenebis(acrylamide) (MBAm) as physical cross-links. Thiol-terminated “soft” prepolymers were first prepared using ethylene glycol dimethacrylate (EGDMA) and an excess of 1,6-hexanedithiol (HDT); subsequently, the thiol-terminated prepolymers were further reacted with MBAm as a chain-extension reaction to yield the multiblock thermoplastic elastomers. The prepolymers with oligo(ethylene glycol) segments had a low glass-transition temperature, acting as elastic “soft” blocks; while MBAm units could form up to 4 hydrogen bonds that serve as physical networks to endow the elasticity to multiblock polymers. Proton nuclear magnetic resonance spectroscopy and gel permeation chromatography indicated the occurrence of the two-step thiol–ene reactions. The reaction kinetics of thiol–ene reactions was found to be highly dependent on the molecular weights of monomers. The first thiol–ene reaction of EGDMA and HDT could reach >90% conversion of both monomers within 5 min; while the kinetics of the second chain extension reaction was relatively slow and it took approximately 7 h to reach 90% conversion. The formation of the intermolecular hydrogen bonding between amide groups of MBAm units was confirmed by variable-temperature Fourier transform infrared spectroscopy and differential scanning calorimetry. The viscoelasticity and elasticity of the thermoplastic elastomers were found to be largely determined by the content of MBAm. With a molar ratio of 15% MBAm relative to EGDMA, the maximum elongation at break of elastomers reached >400%. Our synthetic method has the advantages of mild reaction conditions, high conversion and adjustable mechanical properties of elastomers; additionally, it does not involve heavy syntheses and expensive monomers/catalysts. Our findings conceivably stand out as a new tool to synthesize and engineer thermoplastic elastomers using the combination of thiol–ene chemistry and supramolecular interaction.

Water-gas-shift over metal-free nanocrystalline ceria: An experimental and theoretical study

A tandem experimental and theoretical investigation of a mesoporous ceria catalyst reveals the properties of the metal oxide are conducive for activity typically ascribed to metals, suggesting reduced Ce3+ and oxygen vacancies are responsible for the inherent bi‐functionality of CO oxidation and dissociation of water required for facilitating the production of H2. The degree of reduction of the ceria, specifically the (1 0 0) face, is found to significantly influence the binding of reagents, suggesting reduced surfaces harbor the necessary reactive sites. The metal‐free catalysis of the reaction is significant for catalyst design considerations, and the suite of in situ analyses provides a comprehensive study of the dynamic nature of the high surface area catalyst system. This study postulates feasible improvements in catalytic activity may redirect the purpose of the water‐gas shift reaction from CO purification to primary hydrogen production.

Effect of Gd substitution on the structural, magnetic, and magnetocaloric properties of HoCrO3

Rare-earth chromites are a new type of magnetoelectric multiferroics. In this work, a Ho0.33Gd0.67CrO3 powder sample was synthesized via a citrate route, and the structural properties were characterized by X-ray diffraction, scanning electron microscopy, and the Raman technique. The UV-Visible optical absorbance spectra were also measured in the wavelength range of 200–800 nm. The valence state of Cr was found to be purely 3+ according to the X-ray photoelectron spectroscopy. The temperature-dependent dielectric constant and loss tangent data measured between the frequencies of 1 kHz and 1 MHz show no anomalies around the magnetic transition temperature of the material. The dc magnetization measurements show that the ordering temperature of Cr3+ ( TNCr) is 155 K for Ho0.33Gd0.67CrO3, which is larger than 140 K for HoCrO3. The positive slope of the Arrott plots from 0 T to 7 T reveals that the antiferromagnetic-paramagnetic phase transition is second-order in nature. At a field of 7 T, the Ho0.33Gd0.67CrO3...