D Chuchala

Application of fracture mechanics for energetic effects predictions while wood sawing

In the classical approach, energetic effects (cutting forces and cutting power) of wood sawing process are generally calculated on the basis of the specific cutting resistance, which is in the case of wood cutting the function of more or less important factors. On the other hand, cutting forces (or power—more interesting from energetic point of view) could be considered from a point of view of modern fracture mechanics. Cutting forces may be employed to determine not only toughness but also shear yield strength, which are then applied in the models. Furthermore, forecasting of the shear plane angle for the cutting models, which include fracture toughness in addition to plasticity and friction, broadens possibilities of energetic effects modelling of the sawing process even for small values of the uncut chip. Mentioned models are useful for estimation of energetic effects of sawing of every kinematics. However, for band saws and circular sawing machines, the chip acceleration power variation as a function of mass flow and tool velocity ought to be included in analysis of sawing at larger cutting speeds.

THE EFFECT OF ALTERNATIVE CUTTER PATHS ON FLATNESS DEVIATIONS IN THE FACE MILLING OF ALUMINUM PLATE PARTS

In this paper the relationships between the alternative machining paths and flatness deviations of the aluminum plate part, were presented. The flatness tolerance of the main surface of the plate part has crucial meaning due to the assembly requirement of piezoelectric elements on the radiator. The aluminum bodies under investigation are the base part of the radiators with crimped feathers for the train industry. The surface of the aluminum plate part was milled using three different milling strategies: along of longer or shorter side of workpiece and at an angle of 45°. The aluminum bodies were machined on milling centre ecoMILL 70 DMG MORI. The flatness deviation measurements were carried out on the Coordinated Measuring Machine Altera 7.5.5 Nikon Metrology NV. These measurements were made during the manufacturing process of the radiator, namely after machining, however, before the process crimping of feathers. The results that were obtained enables the validation of assumed milling path strategies in connection of the subsequent machining and assembly processes.