D. Gopi

Corrosion protection performance of porous strontium hydroxyapatite coating on polypyrrole coated 316L stainless steel.

Polypyrrole/strontium hydroxyapatite bilayer coatings were achieved on 316L stainless steel (316L SS) by the electropolymerisation of pyrrole from sodium salicylate solution followed by the electrodeposition of porous strontium hydroxyapatite. The formation and the morphology of the bilayer coatings were characterised by Fourier transform infrared spectroscopy (FT-IR) and high resolution scanning electron microscopy (HRSEM), respectively. The corrosion resistance of the coated 316L SS specimens was investigated in Ringers solution by electrochemical techniques and the results were substantiated with inductively coupled plasma atomic emission spectrometry (ICP-AES). The passive film underneath the polypyrrole layer is effective in protecting 316L SS against corrosion in Ringers solution. Moreover, we believe that the top porous strontium hydroxyapatite layer can provide potential bioactivity to the 316L SS.

Spectroscopic investigation on formation and growth of mineralized nanohydroxyapatite for bone tissue engineering applications.

Synthetic calcium hydroxyapatite (HAP,Ca(10)(PO(4))(6)(OH)(2)) is a well-known bioceramic material used in orthopaedic and dental applications because of its excellent biocompatibility and bone-bonding ability. Substitution of trace elements, such as Sr, Mg and Zn ions into the structure of calcium phosphates is the subject of widespread investigation. In this paper, we have reported the synthesis of Sr, Mg and Zn co-substituted nanohydroxyapatite by soft solution freezing method. The effect of pH on the morphology of bioceramic nanomaterial was also discussed. The in vitro bioactivity of the as-synthesized bioceramic nanomaterial was determined by soaking it in SBF for various days. The as-synthesized bioceramic nanomaterial was characterized by Fourier transform infrared spectroscopy, X- ray diffraction analysis, Scanning electron microscopy and Energy dispersive X-ray analysis and Transmission electron microscopic techniques respectively. The results obtained in our study have revealed that pH 10 was identified to induce the formation of mineralized nanohydroxyapatite. It is observed that the synthesis of bioceramic nanomaterial not only support the growth of apatite layer on its surface but also accelerate the growth which is evident from the in vitro studies. Therefore, mineralized nanohydroxyapatite is a potential candidate in bone tissue engineering.

Synthesis and spectral characterization of silver/magnesium co-substituted hydroxyapatite for biomedical applications

The present work is aimed at the synthesis of antibacterial and bioactive silver/magnesium co-substituted hydroxyapatite (Ag/Mg-HAP) powders. For this purpose, firstly, different concentrations (0.5, 1.5, 2.5wt.%) of silver substituted HAP (Ag-HAP) powders were prepared by ultrasonic irradiation technique and were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). Secondly, magnesium (Mg) is co-substituted as secondary material into Ag-HAP to offset the potential cytotoxicity of Ag, as higher concentration of Ag is toxic. The antibacterial activity of as-synthesized powders was evaluated by Escherichia coli (E. coli) and was found to be effectively high against bacterial colonization. Also, the in vitro cell-material interaction is evaluated with human osteosarcoma MG63 (HOS MG63) cells for cell proliferation. The results showed the evidence of cytotoxic effects of the higher concentration of Ag-HAP characterized by poor cellular viability whereas, Ag/Mg-HAP showed better cell viability indicating that co-substitution of Mg in Ag-HAP effectively offset the negative effects of Ag and improve performance compared with pure HAP. Thus, the as synthesized Ag/Mg-HAP will serve as a better candidate for biomedical applications with good antibacterial property and bone bonding ability.

Synthesis of hydroxyapatite nanoparticles by a novel ultrasonic assisted with mixed hollow sphere template method.

Hydroxyapatite (HAP) is the main inorganic component of bone material and is widely used in various biomedical applications due to its excellent bioactivity and biocompatibility. In this paper, we have reported the synthesis of hydroxyapatite nanoparticles by a novel ultrasonic assisted mixed template directed method. In this method glycine-acrylic acid (GLY-AA) hollow spheres were used as an organic template which could be prepared by mixing of glycine with acrylic acid. The as-synthesized HAP nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM) and tunnelling electron microscope (TEM) to investigate the nature of bonding, crystallinity, size and shape. The thermal stability of as-synthesized nanoparticles was also investigated by the thermo gravimetric analysis (TGA). The effect of ultrasonic irradiation time on the crystallinity and size of the HAP nanoparticles in presence of glycine-acrylic acid hollow spheres template were investigated. From the inspection of the above results it is confirmed that the crystallinity and size of the HAP nanoparticles decrease with increasing ultrasonic irradiation time. Hence the proposed synthesis strategy provides a facile pathway to obtain nano sized HAP with high quality, suitable size and morphology.

Novel banana peel pectin mediated green route for the synthesis of hydroxyapatite nanoparticles and their spectral characterization

Hydroxyapatite [HAP, Ca10(PO4)6(OH)2] is the main inorganic component of natural bone and is widely used in various biomedical applications. In this paper, we have reported the synthesis of HAP nanoparticles by banana peel pectin mediated green template method. The pectin extracted from the peels of banana and its various concentrations were exploited in our study to achieve a controlled crystallinity, particle size as well as uniform morphology of HAP. The extracted pectin was characterized by spectral techniques like Fourier transform infrared spectroscopy (FTIR) for the functional group analysis, proton-1 nuclear magnetic resonance spectroscopy ((1)H NMR) and carbon-13 nuclear magnetic resonance spectroscopy ((13)C NMR) for the identification of H and C atoms in the extracted pectin, respectively. The HAP nanoparticles were synthesized using different concentrations of the as-extracted pectin. The purity, crystallinity and morphology of the as-synthesized HAP nanoparticles were evaluated by FTIR, X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDAX) and transmission electron microscopy (TEM), respectively. Moreover the antibacterial activity of HAP nanoparticles was evaluated against the gram positive and negative bacteria like Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively. The experimental results revealed that the HAP nanoparticles synthesized in the presence of an optimized concentration of pectin are pure, low crystalline, spherical and discrete particles with reduced size. Also, the HAP sample derived in the presence of pectin showed an enhanced antibacterial activity than that of the HAP synthesized in the absence of pectin. Hence, the HAP nanoparticles synthesized using pectin as a green template can act as a good biomaterial for biomedical applications.

Development of strontium and magnesium substituted porous hydroxyapatite/poly(3,4-ethylenedioxythiophene) coating on surgical grade stainless steel and its bioactivity on osteoblast cells

The present study deals with the successful development of bilayer coatings by electropolymerisation of poly(3,4-ethylenedioxythiophene) (PEDOT) on surgical grade stainless steel (316L SS) followed by the electrodeposition of strontium (Sr) and magnesium (Mg) substituted porous hydroxyapatite (Sr, Mg-HA). The bilayer coatings were characterised by Fourier transform infrared spectroscopy (FT-IR) and high resolution scanning electron microscopy (HRSEM). Corrosion resistance of the obtained coatings was investigated in Ringers solution by electrochemical techniques and the results were in good agreement with those obtained from chemical analysis, namely inductively coupled plasma atomic emission spectrometry (ICP-AES). Also, the mechanical and biological properties of the bilayer coatings were analyzed. From the obtained results it was evident that the PEDOT/Sr, Mg-HA bilayer exhibited greater adhesion strength than the Sr, Mg-HA coated 316L SS. In vitro cell adhesion test of the Sr, Mg-HA coating on PEDOT coated specimen is found to be more bioactive compared to that of the single substituted hydroxyapatite (Sr or Mg-HA) on the PEDOT coated 316L SS. Thus, the PEDOT/Sr, Mg-HA bilayer coated 316L SS can serve as a prospective implant material for biomedical applications.

Exact solitary solutions of an inhomogeneous modified nonlinear Schrödinger equation with competing nonlinearities

We employed both tanh and sine-cosine function methods to study the inhomogeneous modified nonlinear Schrodinger (IMNLS) equation and constructed its exact solitary solutions by using symbolic computation software. We compared the solutions obtained by both the methods.

Spectroscopic characterization of porous nanohydroxyapatite synthesized by a novel amino acid soft solution freezing method.

In this paper, we have reported a novel method to synthesize nanoporous hydroxyapatite (HAP) powders by freezing organic-inorganic soft solutions. The formation of porous and crystalline HAP nanopowder was achieved via calcining the samples at 600 degrees C followed by sintering at temperatures ranging from 900 degrees C to 1100 degrees C. The samples were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopic (SEM) techniques. The results showed the formation of a carbon free nanoporous hydroxyapatite powders due to the decomposition of organic template enclosing the precipitated HAP. It was also observed that the rapid grain growth with retainment of pores while the crystallinity of the HAP nanopowder increased with the increase in sintering temperature which is substantiated from the XRD and SEM results. Such organized porous materials can act as a better biomaterial for bone tissue engineering.

Electrodeposition of a porous strontium-substituted hydroxyapatite/zinc oxide duplex layer on AZ91 magnesium alloy for orthopedic applications

Magnesium alloy is a potential biomedical implant because of its outstanding biodegradability and mechanical properties. But the poor corrosion resistance of AZ91 magnesium alloy in physiological solution limits its biomedical applications. In order to improve the corrosion resistance and biological performance of AZ91 magnesium alloy, we have fabricated a strontium-substituted porous hydroxyapatite (Sr-HAP)/zinc oxide (ZnO) duplex layer on AZ91 magnesium alloy by electrodeposition. The porous Sr-HAP/ZnO duplex-layer coating on AZ91 magnesium alloy was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, high-resolution scanning electron microscopy and energy dispersive X-ray analysis. Also, the mechanical properties of the duplex-layer coating were evaluated using adhesion and Vickers micro-hardness tests. The effects of the duplex-layer coating on the corrosion behavior of AZ91 magnesium alloy were also investigated in simulated body fluid using electrochemical studies. The potentiodynamic polarization and electrochemical impedance spectroscopy results indicated that the corrosion resistance of AZ91 magnesium alloy was significantly improved by the duplex-layer coating. The in vitro cell-material interaction of the duplex-layer coating was observed with human osteosarcoma MG63 cells for cell viability at 1, 4 and 7 days of incubation and the coating exhibited good biocompatibility. Hence, from the obtained results we believe that the duplex-layer made of ZnO together with porous Sr-HAP on AZ91 magnesium alloy could provide effective corrosion protection and enhanced bioactivity. Thus, duplex-layer-coated AZ91 magnesium alloy can serve as a promising candidate for orthopedic applications.

Shape changing soliton in a site-dependent ferromagnet using tanh-function method

The dynamics of an inhomogeneous (site-dependent) Heisenberg ferromagnetic spin chain with Gilbert damping is expressed in the form of the Landau–Lifshitz–Gilbert (LLG) equation in the classical continuum limit. By stereographic projection of the unit sphere of spin onto a complex plane, we rewrite the LLG equation in terms of the stereographic variable ω(x,t). Using the modified extended tanh-function method with the aid of symbolic computation the exact spin soliton solution is constructed. The effect of inhomogeneity and damping on the spin soliton is studied.