D. Legnini

X-ray fluorescence microscopy reveals large-scale relocalization and extracellular translocation of cellular copper during angiogenesis

Although copper has been reported to influence numerous proteins known to be important for angiogenesis, the enhanced sensitivity of this developmental process to copper bioavailability has remained an enigma, because copper metalloproteins are prevalent and essential throughout all cells. Recent developments in x-ray optics at third-generation synchrotron sources have provided a resource for highly sensitive visualization and quantitation of metalloproteins in biological samples. Here, we report the application of x-ray fluorescence microscopy (XFM) toin vitro models of angiogenesis and neurogenesis, revealing a surprisingly dramatic spatial relocalization specific to capillary formation of 80–90% of endogenous cellular copper stores from intracellular compartments to the tips of nascent endothelial cell filopodia and across the cell membrane. Although copper chelation had no effect on process formation, an almost complete ablation of network formation was observed. XFM of highly vascularized ductal carcinomas showed copper clustering in putative neoangiogenic areas. This use of XFM for the study of a dynamic developmental process not only sheds light on the copper requirement for endothelial tube formation but highlights the value of synchrotron-based facilities in biological research.

Quantitative 3D elemental microtomography of Cyclotella meneghiniana at 400-nm resolution

X-ray fluorescence tomography promises to map elemental distributions in unstained and unfixed biological specimens in three dimensions at high resolution and sensitivity, offering unparalleled insight in medical, biological, and environmental sciences. X-ray fluorescence tomography of biological specimens has been viewed as impractical—and perhaps even impossible for routine application—due to the large time required for scanning tomography and significant radiation dose delivered to the specimen during the imaging process. Here, we demonstrate submicron resolution X-ray fluorescence tomography of a whole unstained biological specimen, quantifying three-dimensional distributions of the elements Si, P, S, Cl, K, Ca, Mn, Fe, Cu, and Zn in the freshwater diatom Cyclotella meneghiniana with 400-nm resolution, improving the spatial resolution by over an order of magnitude. The resulting maps faithfully reproduce cellular structure revealing unexpected patterns that may elucidate the role of metals in diatom biology and of diatoms in global element cycles. With anticipated improvements in data acquisition and detector sensitivity, such measurements could become routine in the near future.

11 nm hard X-ray focus from a large-aperture multilayer Laue lens

The focusing performance of a multilayer Laue lens (MLL) with 43.4 μm aperture, 4 nm finest zone width and 4.2 mm focal length at 12 keV was characterized with X-rays using ptychography method. The reconstructed probe shows a full-width-at-half-maximum (FWHM) peak size of 11.2 nm. The obtained X-ray wavefront shows excellent agreement with the dynamical calculations, exhibiting aberrations less than 0.3 wave period, which ensures the MLL capable of producing a diffraction-limited focus while offering a sufficient working distance. This achievement opens up opportunities of incorporating a variety of in-situ experiments into ultra high-resolution X-ray microscopy studies.

Differential phase contrast with a segmented detector in a scanning X-ray microprobe.

Scanning X-ray microprobes are unique tools for the nanoscale investigation of specimens from the life, environmental, materials and other fields of sciences. Typically they utilize absorption and fluorescence as contrast mechanisms. Phase contrast is a complementary technique that can provide strong contrast with reduced radiation dose for weakly absorbing structures in the multi-keV range. In this paper the development of a segmented charge-integrating silicon detector which provides simultaneous absorption and differential phase contrast is reported. The detector can be used together with a fluorescence detector for the simultaneous acquisition of transmission and fluorescence data. It can be used over a wide range of photon energies, photon rates and exposure times at third-generation synchrotron radiation sources, and is currently operating at two beamlines at the Advanced Photon Source. Images obtained at around 2 keV and 10 keV demonstrate the superiority of phase contrast over absorption for specimens composed of light elements.

X-ray imaging and microspectroscopy of plants and fungi.

X-ray fluorescence microscopy and microspectroscopy with micrometre spatial resolution and unprecedented capabilities for the study of biological and environmental samples are reported. These new capabilities are a result of both the combination of high-brilliance synchrotron radiation and high-performance X-ray microfocusing optics and the intrinsic advantages of X-rays for elemental mapping and chemical-state imaging. In this paper, these capabilities are illustrated by experimental results on hard X-ray phase-contrast imaging, X-ray fluorescence (XRF) imaging and microspectroscopy of mycorrhizal plant roots and fungi in their natural hydrated state. The XRF microprobe is demonstrated by the simultaneous mapping of the elemental distributions of P, S, K, Ca, Mn, Fe, Ni, Cu and Zn with a spatial resolution of approximately 1 x 3 micron and with an elemental sensitivity of approximately 500 p.p.b. Microspectroscopy with the same spatial resolution is demonstrated by recording near-edge X-ray absorption (XANES) spectra of Mn at a concentration of approximately 3 p.p.m.

Performance of a high-resolution x-ray microprobe at the Advanced Photon Source

We have developed a x-ray microprobe in the energy region from 6 to 20 keV using undulator radiation and zone-plate optics for microfocusing-based techniques and applications at a beamline at the Advanced Photon Source (APS). The performance of the beamline was shown to meet our design objectives, including preservation of the source brilliance and coherence, selectable transverse coherence length and energy bandwidth, high angular stability, and harmonic suppression of the beam. These objectives were achieved by careful thermal management and use of a novel mirror and crystal monochromator cooling geometry. All beamline optical components are water cooled, and the x-ray beam in the experiment station is stable in beam intensity, energy, and position over many days with no active feedback. Using a double-crystal Si(111) monochromator, we have obtained a focal spot size (FWHM) of 0.15 μm(v)×1.0 μm(h), and a photon flux of 4×109 photons/sec at the focal spot, and thus a photon flux density gain of 15,000. A...

Migration of mercury from dental amalgam through human teeth

Exposure to mercury from dental amalgams, with possible negative health effects, has generally been considered to occur via either erosion or evaporation directly from the surface of fillings, followed by ingestion. The aim of this study was to determine the relative importance of the direct migration of mercury through the tooth as an alternative exposure pathway. X-ray fluorescence imaging has been used to determine quantitatively the spatial distribution of Hg, Ca, Zn and Cu in sections of human teeth that had been filled with amalgam for more than 20 years. X-ray absorption near-edge spectroscopy (XANES) was also employed to gain chemical information on the mercury present in the teeth. Hg (up to approximately 10 mg g(-1)) and Zn (>100 mg g(-1)) were detected in the teeth several millimetres from the location of the amalgams. At high resolution, Hg showed higher concentrations in dentinal tubules while Zn was generally evenly distributed. XANES showed that the chemical form of Hg that had migrated into the tooth had been altered from that present in the amalgam. The differing spatial distributions of Hg and Zn suggest distinct transport mechanisms for the two metals, presumably chemical for Zn and initially physical for Hg. Subsequent oxidation of Hg may lead to a loss of mobility or the development of a secondary transport mechanism. Most importantly the detection of Hg in areas of the tooth that once contained an active bloodstream and in calculus indicates that both exposure pathways should be considered as significant.

Measurement of strain in Al–Cu interconnect lines with x-ray microdiffraction

We report measurement of strain in patterned Al–Cu interconnect lines with x-ray microdiffraction technique with a ∼1 μm spatial resolution. Monochromatized x rays from an undulator were focused on the sample using a phase fresnel zone plate and diffracted light was collected by an area detector in a symmetric, angle dispersive x-ray diffraction geometry. Measurements were made before and after the line sample was stressed for electromigration. Results show an increase in inter- and intra-grain strain variation after the testing. Differences in strain behavior of grains with (111) and (200) crystallographic planes parallel to the substrate surface were observed. A position dependent variation of strain after the testing was measured whereas no such dependence was found before the testing.

Quantitative X-ray wavefront measurements of Fresnel zone plate and K-B mirrors using phase retrieval

A scanning coherent diffraction imaging method was used to reconstruct the X-ray wavefronts produced by a Fresnel zone plate (FZP) and by Kirkpatrick-Baez (KB) focusing mirrors. The ptychographical measurement was conducted repeatedly by placing a lithographed test sample at different defocused planes. The wavefronts, recovered by phase-retrieval at well-separated planes, show good consistency with numerical propagation results, which provides a self-verification. The validity of the obtained FZP wavefront was further confirmed with theoretical predictions.

Focussing optics for a synchrotron-based X-ray microprobe

Abstract X-ray microprobe experiments at third-generation synchrotron sources will provide trace element analysis of samples with 1 μm × 1 μm spatial resolution and femtogram sensitivity. For these experiments to be possible. X-ray optical elements need to be developed to focus the beam from a hard X-ray undulator to a micron spot size. In June 1991 several different optical elements were tested during a dedicated undulator run at CHESS. The undulator produced radiation similar to that which will be available at third-generation sources like the Advanced Photon Source. Both Fresnel zone plates and multilayer-coated spherical mirrors were tested. With the Fresnel zone plate a spot size of 8.5 μm × 30 μm was achieved in the first order and 6 μm × 20 μm in the second order. With a Kirkpatrick-Baez multilayer mirror system a spot size of 4 μm × 9 μm was achieved. Based on these results, some of the requirements for an optical system suitable for a dedicated microprobe beamline are given.