D. Prieur
University of Pittsburgh
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by D. Prieur.
Prepared for | 2008
D. Prieur; E.-E. Kluge; C. C. Ohm; M. C. Stockton; S. B. Silverstein; Murrough Landon; T. Kuehl; D. G. Charlton; Uli Schaefer; E. Eisenhandler; A. Hidvegi; C. Boehm; K. Schmitt; A. T. Watson; J. T. Childers; N. J. Collins; P. Adragna; Joergen Sjoelin; F. Föhlisch; U. Schäfer; M. Wessels; C.L.A. Tan; M. A. Wildt; J. Sjölin; F. Foehlisch; K. Meier; M. Groll; C. J. Curtis; P. D. Thompson; F. Mueller
The ATLAS first-level calorimeter trigger is a hardware-based system designed to identify high-pT jets, electron/photon and tau candidates and to measure total and missing ET in the calorimeters. The installation of the full system of custom modules, crates and cables was completed in late 2007, but, even before the completion, it was being used as a trigger during ATLAS commissioning and integration. During 2008, the performance of the full system has been tuned during further commissioning and cosmic runs, leading to its use in initial LHC data taking. Results and analysis of the trigger performance in these runs will be presented.
Archive | 2007
R Achenbach; U. Schäfer; D. Prieur; D. G. Charlton; C. N. P. Gee; I.P. Brawn; A. Neusiedl; E-E Woehrling; S. Hellman; J. N. Lilley; S. Tapprogge; P. Hanke; Hans-Christian Schultz-Coulon; E-E Kluge; W. Qian; R. Staley; J. Fleckner; A. R. Gillman; P. M. Watkins; Murrough Landon; K. Schmitt; E. Eisenhandler; P. Weber; M. C. Stockton; F. Föhlisch; Andrei; T. Trefzger; P.J.W. Faulkner; C. Bohm; S. B. Silverstein
The ATLAS first-level calorimeter trigger is a hard warebased system designed to identify high-p T jets, electron/photon and tau candidates, and to measure total and missing E T. The trigger consists of a Preprocessor system which digitises 7200 analogue inputs, and two digit al multicrate processor systems which find jets, measure en ergy sums, and identify localised energy deposits (electron/ph oton and tau candidates). In order to provide a trigger quic kly enough, the hardware is parallel and pipelined. Experience so far of the Jet/Energy-sum and Cluster Processor system production, commissioning, and integration into ATLAS will be described.
Prepared for | 2009
R. Achenbach; E.-E. Kluge; C. C. Ohm; M. C. Stockton; S. B. Silverstein; Murrough Landon; T. Kuehl; D. G. Charlton; Uli Schaefer; E. Eisenhandler; A. Hidvegi; C. Boehm; K. Schmitt; A. T. Watson; J. T. Childers; N. J. Collins; P. Adragna; Joergen Sjoelin; F. Föhlisch; U. Schäfer; M. Wessels; D. Prieur; M. A. Wildt; J. Sjölin; F. Foehlisch; K. Meier; M. Groll; C. J. Curtis; P. D. Thompson; F. Mueller
The ATLAS Level-1 Calorimeter Trigger is a hardwarebased system which aims to identify objects with high transverse momentum within an overall latency of 2.5μs. It is composed of a PreProcessor system (PPr) which digitises 7200 analogue input channels, determines the bunch crossing of the interaction, applies a digital noise filter, and provides a fine calibration; and two subsequent digital processors. The PreProcessor system needs various channel dependent parameters to be set in order to provide digital signals which are aligned in time and have proper energy calibration. The different techniques which are used to derive these parameters are described along with the quality tests of the analogue input signals.
Prepared for | 2008
R. Achenbach; E.-E. Kluge; C. C. Ohm; M. C. Stockton; S. B. Silverstein; Murrough Landon; T. Kuehl; D. G. Charlton; Uli Schaefer; E. Eisenhandler; A. Hidvegi; Dave Sankey; K. Schmitt; A. T. Watson; J. T. Childers; N. J. Collins; P. Adragna; Joergen Sjoelin; F. Föhlisch; U. Schäfer; M. Wessels; D. Prieur; M. A. Wildt; J. Sjölin; F. Foehlisch; K. Meier; M. Groll; C. J. Curtis; P. D. Thompson; F. Mueller
The ATLAS first-level calorimeter trigger is a hardware-based system designed to identify high-pT jets, electron/photon and tau candidates and to measure total and missing ET in the ATLAS calorimeters. The complete trigger system consists of over 300 custom designed VME modules of varying complexity. These modules are based around FPGAs or ASICs with many configurable parameters, both to initialize the system with correct calibrations and timings and to allow flexibility in the trigger algorithms. The control, testing and monitoring of these modules requires a comprehensive, but well-designed and modular, software framework, which we will describe in this paper.
Prepared for | 2008
R. Achenbach; E.-E. Kluge; C. C. Ohm; M. C. Stockton; S. B. Silverstein; Murrough Landon; T. Kuehl; D. G. Charlton; Uli Schaefer; E. Eisenhandler; A. Hidvegi; Dave Sankey; K. Schmitt; A. T. Watson; J. T. Childers; N. J. Collins; P. Adragna; Joergen Sjoelin; F. Föhlisch; U. Schäfer; M. Wessels; D. Prieur; M. A. Wildt; J. Sjölin; F. Foehlisch; K. Meier; M. Groll; C. J. Curtis; P. D. Thompson; F. Mueller
The ATLAS Level-1 calorimeter trigger is a hardware-based system with the goal of identifying high-pT objects and to measure total and missing ET in the ATLAS calorimeters within an overall latency of 2.5 s. This trigger system is composed of the Preprocessor which digitises about 7200 analogue input channels and two digital processors to identify high-pT signatures and to calculate the energy sums. The digital part consists of multi-stage, pipelined custom-built modules. The high demands on connectivity between the initial analogue stage and digital part and between the custom-built modules are presented. Furthermore the techniques to establish timing regimes and verify connectivity and stable operation of these digital links will be described.