Daegi Kim

Ultrasound pretreatment of filamentous algal biomass for enhanced biogas production.

The filamentous alga Hydrodictyon reticulatum harvested from a bench-scale wastewater treatment pond was used to evaluate biogas production after ultrasound pretreatment. The effects of ultrasound pretreatment at a range of 10-5000 J/mL were tested with harvested H. reticulatum. Cell disruption by ultrasound was successful and showed a higher degree of disintegration at a higher applied energy. The range of 10-5000 J/mL ultrasound was able to disintegrated H. reticulatum and the soluble COD was increased from 250 mg/L to 1000 mg/L at 2500 J/mL. The disintegrated algal biomass was digested for biogas production in batch experiments. Both cumulative gas generation and volatile solids reduction data were obtained during the digestion. Cell disintegration due to ultrasound pretreatment increased the specific biogas production and degradation rates. Using the ultrasound approach, the specific methane production at a dose of 40 J/mL increased up to 384 mL/g-VS fed that was 2.3 times higher than the untreated sample. For disintegrated samples, the volatile solids reduction was greater with increased energy input, and the degradation increased slightly to 67% at a dose of 50 J/mL. The results also indicate that disintegration of the algal cells is the essential step for efficient anaerobic digestion of algal biomass.

Hydrothermal Upgrading of Korean MSW for Solid Fuel Production: Effect of MSW Composition

In Korea, municipal solid waste (MSW) treatment is conducted by converting wastes into energy resources using the mechanical-biological treatment (MBT). The small size MSW to be separated from raw MSW by mechanical treatment (MT) is generally treated by biological treatment that consists of high composition of food residue and paper and so forth. In this research, the hydrothermal treatment was applied to treat the surrogate MT residue composed of paper and/or kimchi. It was shown that the hydrothermal treatment increased the calorific value of the surrogate MT residue due to increasing fixed carbon content and decreasing oxygen content and enhanced the dehydration and drying performances of kimchi. Comparing the results of paper and kimchi samples, the calorific value of the treated product from paper was increased more effectively due to its high content of cellulose. Furthermore, the change of the calorific value before and after the hydrothermal treatment of the mixture of paper and kimchi can be well predicted by this change of paper and kimchi only. The hydrothermal treatment can be expected to effectively convert high moisture MT residue into a uniform solid fuel.

Changes in bacterial and archaeal communities in anaerobic digesters treating different organic wastes

The goal of this study was to characterize microbial communities in anaerobic batch digesters treating different representative organic sources (sewage sludge, food waste, septage). Among the digesters, the anaerobic digester of food waste had the highest methanogen density, producing a peak value methane yield of 813.2mLCH4/gVS. In all the digesters, acetoclastic Methanosarcinales and hydrogenotrophic Methanomicrobiales were the most dominant methanogen groups, but their proportion among the methanogens varied depending on the organic sources. The bacteria community in the anaerobic digestion (AD) of food waste and septage was distinctly different from that found in the AD of sewage sludge (primary sludge and waste activated sludge). Shifts in both bacterial and archaeal community structures could be related to differences in chemical properties, production, and accumulation of intermediates digested from organic wastes having different characteristics. These findings could prove useful in optimizing the microbial community to enhance AD process treating organic wastes.

Characterized hydrochar of algal biomass for producing solid fuel through hydrothermal carbonization

The aim of this work was to study the characterized hydrochar of algal biomass to produce solid fuel though hydrothermal carbonization. Hydrothermal carbonization conducted at temperatures ranging from 180 to 270 °C with a 60 min reaction improved the upgrading of the fuel properties and the dewatering of wet-basis biomasses such as algae. The carbon content, carbon recovery, energy recovery, and atomic C/O and C/H ratios in all the hydrochars in this study were improved. These characteristic changes in hydrochar from algal biomass are similar to the coalification reactions due to dehydration and decarboxylation with an increase in the hydrothermal reaction temperature. The results of this study indicate that hydrothermal carbonization can be used as an effective means of generating highly energy-efficient renewable fuel resources using algal biomass.

Effect of hydrothermal pre-treatment (HTP) on poultry slaughterhouse waste (PSW) sludge for the enhancement of the solubilization, physical properties, and biogas production through anaerobic digestion

This study is an assessment of the hydrothermal pre-treatment (HTP) of poultry slaughterhouse waste (PSW) sludge for the enhancement of the solubilization, physical properties, and biogas production through anaerobic digestion. This assessment was carried out to ascertain the optimal HTP temperature. The solubilization and physical properties efficacy was investigated by capillary suction time (CST), time to filter (TTF), and particle size. In addition, the anaerobic digestion was investigated through biochemical methane potential (BMP) tests and subsequent statistical analysis using the modified Gompertz model. HTP was found to have improved the solubilization of the PSW sludge with increasing HTP temperature. In addition, the results of the CST, TTF, and particle size decreased with increasing HTP temperature. These results of the assessment that was conducted in this study confirm that the HTP process indeed modifies the physical properties of PSWs to enhance the solubilization of organic solids. Nevertheless, the results of the BMP tests and the modified Gompertz model analysis show that the optimal HTP temperature of PSWs for anaerobic digestion is 190°C. These findings show that to achieve high conversion efficiency, an accurately designed pre-treatment step must be included in the overall anaerobic digestion process for wastewater treatment.

Use of concentrate water from seawater desalination plant as magnesium sources for struvite formation by using anaerobically digested effluent of swine wastewater

AbstractAlthough struvite crystallization has been proven an effective process to recover nutrients from wastewater, this method has not been used widely because of the cost of the raw chemicals, such as magnesium chloride, required as supplements. In this study, in view of the high cost of supplementing magnesium, reject water from a seawater reverse osmosis process was investigated as a potential source of magnesium. The magnesium was used in the nutrient recovery process, by which struvite crystallization was performed from the anaerobically digested effluent of swine wastewater. The results of all the experiments were positive, indicating that struvite formation was successfully performed from the effluent, using the concentrate water as a magnesium source. Removal efficiencies of up to 94.5% for phosphate and 12.7% for ammonium were achieved under normal operating conditions. Seed materials were successfully used as nucleation sites to enhance the purity of the struvite and the crystal size. The remo...

A numerical study on the behavior of coastal waste particles in a wind-power sorting system for renewable fuel production

In this study, a Computational Fluid Dynamics (CFD) to analyze the coastal waste particles in a wind-power sorting system is applied to produce renewable fuel using commercial CFD package (ANSYS-CFX code). The numerical methodology results predicted various coastal waste shredded inside the sorting machine. Furthermore, to identify the effect of working conditions on separation characteristics, a parametric study is performed. These study findings will offer appropriate a wind-power sorting conditions according to the purpose of using coastal waste. Under basic conditions, the characteristics of coastal waste particle behavior and the sorting of waste particles were analyzed, and the behavioral changes of diverse particles were identified by changing the airflow rate to improve the sorting performance. As a result, an appropriate airflow rate, Qair = 85 m3/min, at which the change in the airflow rate can simultaneously meet the conditions for both the recovery of the combustibles and the removal of the incombustibles, was selected with the selection efficiency rate was 92%, and the combustibles content was 99%. Based on the results of the analysis, the particle characteristics of sorting were identified to reduce and recycle the coastal waste.