Dakotah Thompson

Radiative heat transfer in the extreme near field

Radiative transfer of energy at the nanometre length scale is of great importance to a variety of technologies including heat-assisted magnetic recording, near-field thermophotovoltaics and lithography. Although experimental advances have enabled elucidation of near-field radiative heat transfer in gaps as small as 20–30 nanometres (refs 4, 5, 6), quantitative analysis in the extreme near field (less than 10 nanometres) has been greatly limited by experimental challenges. Moreover, the results of pioneering measurements differed from theoretical predictions by orders of magnitude. Here we use custom-fabricated scanning probes with embedded thermocouples, in conjunction with new microdevices capable of periodic temperature modulation, to measure radiative heat transfer down to gaps as small as two nanometres. For our experiments we deposited suitably chosen metal or dielectric layers on the scanning probes and microdevices, enabling direct study of extreme near-field radiation between silica–silica, silicon nitride–silicon nitride and gold–gold surfaces to reveal marked, gap-size-dependent enhancements of radiative heat transfer. Furthermore, our state-of-the-art calculations of radiative heat transfer, performed within the theoretical framework of fluctuational electrodynamics, are in excellent agreement with our experimental results, providing unambiguous evidence that confirms the validity of this theory for modelling radiative heat transfer in gaps as small as a few nanometres. This work lays the foundations required for the rational design of novel technologies that leverage nanoscale radiative heat transfer.

Enhancement of near-field radiative heat transfer using polar dielectric thin films

Thermal radiative emission from a hot surface to a cold surface plays an important role in many applications, including energy conversion, thermal management, lithography, data storage and thermal microscopy. Recent studies on bulk materials have confirmed long-standing theoretical predictions indicating that when the gap between the surfaces is reduced to tens of nanometres, well below the peak wavelength of the blackbody emission spectrum, the radiative heat flux increases by orders of magnitude. However, despite recent attempts, whether such enhancements can be obtained in nanoscale dielectric films thinner than the penetration depth of thermal radiation, as suggested by theory, remains experimentally unknown. Here, using an experimental platform that comprises a heat-flow calorimeter with a resolution of about 100 pW (ref. 7), we experimentally demonstrate a dramatic increase in near-field radiative heat transfer, comparable to that obtained between bulk materials, even for very thin dielectric films (50-100 nm) when the spatial separation between the hot and cold surfaces is comparable to the film thickness. We explain these results by analysing the spectral characteristics and mode shapes of surface phonon polaritons, which dominate near-field radiative heat transport in polar dielectric thin films.

Radiative heat conductances between dielectric and metallic parallel plates with nanoscale gaps

Recent experiments have demonstrated that radiative heat transfer between objects separated by nanometre-scale gaps considerably exceeds the predictions of far-field radiation theories. Exploiting this near-field enhancement is of great interest for emerging technologies such as near-field thermophotovoltaics and nano-lithography because of the expected increases in efficiency, power conversion or resolution in these applications. Past measurements, however, were performed using tip-plate or sphere-plate configurations and failed to realize the orders of magnitude increases in radiative heat currents predicted from near-field radiative heat transfer theory. Here, we report 100- to 1,000-fold enhancements (at room temperature) in the radiative conductance between parallel-planar surfaces at gap sizes below 100 nm, in agreement with the predictions of near-field theories. Our measurements were performed in vacuum gaps between prototypical materials (SiO2-SiO2, Au-Au, SiO2-Au and Au-Si) using two microdevices and a custom-built nanopositioning platform, which allows precise control over a broad range of gap sizes (from <100 nm to 10 μm). Our experimental set-up will enable systematic studies of a variety of near-field-based thermal phenomena, with important implications for thermophotovoltaic applications, that have been predicted but have defied experimental verification.

Quantification of thermal and contact resistances of scanning thermal probes

Scanning thermal probes are widely used for imaging temperature fields with nanoscale resolution, for studying near-field radiative heat transport and for locally heating samples. In all these applications, it is critical to know the thermal resistance to heat flow within the probe and the thermal contact resistance between the probe and the sample. Here, we present an approach for quantifying the aforementioned thermal resistances using picowatt resolution heat flow calorimeters. The measured contact resistance is found to be in good agreement with classical predictions for thermal contact resistance. The techniques developed here are critical for quantitatively probing heat flows at the nanoscale.

Peltier cooling in molecular junctions

The study of thermoelectricity in molecular junctions is of fundamental interest for the development of various technologies including cooling (refrigeration) and heat-to-electricity conversion1–4. Recent experimental progress in probing the thermopower (Seebeck effect) of molecular junctions5–9 has enabled studies of the relationship between thermoelectricity and molecular structure10,11. However, observations of Peltier cooling in molecular junctions—a critical step for establishing molecular-based refrigeration—have remained inaccessible. Here, we report direct experimental observations of Peltier cooling in molecular junctions. By integrating conducting-probe atomic force microscopy12,13 with custom-fabricated picowatt-resolution calorimetric microdevices, we created an experimental platform that enables the unified characterization of electrical, thermoelectric and energy dissipation characteristics of molecular junctions. Using this platform, we studied gold junctions with prototypical molecules (Au–biphenyl-4,4′-dithiol–Au, Au–terphenyl-4,4′′-dithiol–Au and Au–4,4′-bipyridine–Au) and revealed the relationship between heating or cooling and charge transmission characteristics. Our experimental conclusions are supported by self-energy-corrected density functional theory calculations. We expect these advances to stimulate studies of both thermal and thermoelectric transport in molecular junctions where the possibility of extraordinarily efficient energy conversion has been theoretically predicted2–4,14.A calorimetry technique with picowatt sensitivity enables the experimental observation of cooling in molecular junctions.

Nanogap near-field thermophotovoltaics

Conversion of heat to electricity via solid-state devices is of great interest and has led to intense research of thermoelectric materials1,2. Alternative approaches for solid-state heat-to-electricity conversion include thermophotovoltaic (TPV) systems where photons from a hot emitter traverse a vacuum gap and are absorbed by a photovoltaic (PV) cell to generate electrical power. In principle, such systems may also achieve higher efficiencies and offer more versatility in use. However, the typical temperature of the hot emitter remains too low (<1,000 K) to achieve a sufficient photon flux to the PV cell, limiting practical applications. Theoretical proposals3–12 suggest that near-field (NF) effects13–18 that arise in nanoscale gaps may be leveraged to increase the photon flux to the PV cell and significantly enhance the power output. Here, we describe functional NFTPV devices consisting of a microfabricated system and a custom-built nanopositioner and demonstrate an ~40-fold enhancement in the power output at nominally 60 nm gaps relative to the far field. We systematically characterize this enhancement over a range of gap sizes and emitter temperatures, and for PV cells with two different bandgap energies. We anticipate that this technology, once optimized, will be viable for waste heat recovery applications.The power output of a thermophotovoltaic device featuring an emitter and a photovoltaic cell increases by more than an order of magnitude when the gap size between the emitter and the cell is reduced to the nanoscale.

Giant Enhancement in Radiative Heat Transfer in Sub-30 nm Gaps of Plane Parallel Surfaces

Radiative heat transfer rates that exceed the blackbody limit by several orders of magnitude are expected when the gap size between plane parallel surfaces is reduced to the nanoscale. To date, experiments have only realized enhancements of ∼100 fold as the smallest gap sizes in radiative heat transfer studies have been limited to ∼50 nm by device curvature and particle contamination. Here, we report a 1,200-fold enhancement with respect to the far-field value in the radiative heat flux between parallel planar silica surfaces separated by gaps as small as ∼25 nm. Achieving such small gap sizes and the resultant dramatic enhancement in near-field energy flux is critical to achieve a number of novel near-field based nanoscale energy conversion systems that have been theoretically predicted but remain experimentally unverified.

A Thermal Diode Based on Nanoscale Thermal Radiation

In this work we demonstrate thermal rectification at the nanoscale between doped Si and VO2 surfaces. Specifically, we show that the metal-insulator transition of VO2 makes it possible to achieve large differences in the heat flow between Si and VO2 when the direction of the temperature gradient is reversed. We further show that this rectification increases at nanoscale separations, with a maximum rectification coefficient exceeding 50% at ∼140 nm gaps and a temperature difference of 70 K. Our modeling indicates that this high rectification coefficient arises due to broadband enhancement of heat transfer between metallic VO2 and doped Si surfaces, as compared to narrower-band exchange that occurs when VO2 is in its insulating state. This work demonstrates the feasibility of accomplishing near-field-based rectification of heat, which is a key component for creating nanoscale radiation-based information processing devices and thermal management approaches.

Parallelized, real-time, metabolic-rate measurements from individual Drosophila

Significant recent evidence suggests that metabolism is intricately linked to the regulation and dysfunction of complex cellular and physiological responses ranging from altered metabolic programs in cancers and aging to circadian rhythms and molecular clocks. While the metabolic pathways and their fundamental control mechanisms are well established, the precise cellular mechanisms underpinning, for example, enzymatic pathway control, substrate preferences or metabolic rates, remain far less certain. Comprehensive, continuous metabolic studies on model organisms, such as the fruit fly Drosophila melanogaster, may provide a critical tool for deciphering these complex physiological responses. Here, we describe the development of a high-resolution calorimeter, which combines sensitive thermometry with optical imaging to concurrently perform measurements of the metabolic rate of ten individual flies, in real-time, with ~100 nW resolution. Using this calorimeter we have measured the mass-specific metabolic rates of flies of different genotypes, ages, and flies fed with different diets. This powerful new approach enables systematic studies of the metabolic regulation related to cellular and physiological function and disease mechanisms.

Hundred-fold enhancement in far-field radiative heat transfer over the blackbody limit

Radiative heat transfer (RHT) has a central role in entropy generation and energy transfer at length scales ranging from nanometres to light years1. The blackbody limit2, as established in Max Planck’s theory of RHT, provides a convenient metric for quantifying rates of RHT because it represents the maximum possible rate of RHT between macroscopic objects in the far field—that is, at separations greater than Wien’s wavelength3. Recent experimental work has verified the feasibility of overcoming the blackbody limit in the near field4–7, but heat-transfer rates exceeding the blackbody limit have not previously been demonstrated in the far field. Here we use custom-fabricated calorimetric nanostructures with embedded thermometers to show that RHT between planar membranes with sub-wavelength dimensions can exceed the blackbody limit in the far field by more than two orders of magnitude. The heat-transfer rates that we observe are in good agreement with calculations based on fluctuational electrodynamics. These findings may be directly relevant to various fields, such as energy conversion, atmospheric sciences and astrophysics, in which RHT is important.Rates of radiative heat transfer between sub-wavelength planar membranes are experimentally and theoretically shown to exceed the blackbody limit in the far field by more than two orders of magnitude.