Damien Le Nihouannen

Brushite–collagen composites for bone regeneration

Brushite-based biomaterials are of special interest in bone regeneration due to their biocompatibility and biodegradability; on the other hand, collagen is a well-known osteoconductive biomaterial. In the present study a new brushite-collagen composite biomaterial is reported. This new biomaterial was prepared by combining citric acid/collagen type I solutions with a brushite cement powder. The obtained biomaterial was a cement paste, with improved handling properties. The effect of collagen on the setting reaction of brushite cement was studied, and was found to speed up the cement setting reaction. The cement paste set into a hard ceramic material within 18.5+/-2.1min and had compressive strength similar to that of spongeous bone (48.9+/-5.9MPa in dry conditions and 12.7+/-1.5MPa in humid conditions). The combination of collagen with citric acid revealed an interesting synergistic effect on the compressive strength of the composite material. Moreover, this new biomaterial had excellent cohesion properties (ninefold better than brushite cement), and high cellular adhesion capacity (threefold higher than brushite cement). The composite biomaterial described in this study combines good handling properties, compressive strength, cohesion and cell adhesion capacity, along with the osteoconductive and biodegradable properties inherent in brushite and in collagen-based biomaterials.

Biocompatibility of magnesium phosphate minerals and their stability under physiological conditions

Magnesium phosphates such as newberyite (MgHPO(4)·3H(2)O) are formed in vivo and are known to be biodegradable and nontoxic after implantation. Indeed, magnesium apatites have been shown to support osteoblast differentiation and function, and bone formation can occur around metallic magnesium implants. However, very little is known regarding the precipitation and stability of magnesium phosphates in physiological environments. In order to address this, the aqueous formation of magnesium phosphate as a function of pH, temperature and ion concentration is reported. Physicochemical characterization of the precipitates was carried out; additionally, biocompatibility and gene expression of osteoblast differentiation markers for bone formation via an in vitro cell culture assay were determined. Precipitation conditions for newberyite, tribasic magnesium phosphate pentahydrate, holtedahlite, bobierrite and cattiite were determined. Under physiological conditions of pH, temperature and magnesium phosphate concentration, no precipitates were formed. However, at concentrations 10-100 times higher than physiological, magnesium phosphate precipitates of cattiite and newberyite were formed. These two minerals demonstrated biocompatibility with osteoblast cultures and induced osteoblast adhesion and differentiation. The pattern of expression of OCN and CollA1 genes in the presence of newberyite crystals was comparable to that of calcium phosphate bioceramics. In our experiments, we have shown that certain magnesium phosphate phases such as newberyite and cattiite are able to promote in vivo osteogenic activity in a similar way to calcium phosphates such as hydroxyapatite and brushite. This confirms the great potential of magnesium phosphate ceramics in the development of new biomaterials for bone regeneration.

The use of RANKL-coated brushite cement to stimulate bone remodelling

Calcium phosphate cements were first proposed as synthetic bone substitutes over two decades ago, however, they are characterised by slow chemical or cellular resorption and a slow osteointegration. In contrast, bone autograft has been shown to stimulate osteoclastogenesis and angiogenesis resulting in active bone remodelling and rapid graft incorporation. Therefore, we aimed to develop a biomaterial able to release a key stimulator of the bone remodelling process, cytokine RANKL. Cylinders of brushite cement, hydroxyapatite cement and sodium alginate were loaded with RANKL either by incorporation into the cement or by coating the material with soluble RANKL. To test the biological activity of these formulations, we assessed their effectiveness in inducing osteoclast formation from RAW 264.7 monocytic cell line. Only brushite and hydroxyapatite cements coated with RANKL allowed for retaining sufficient biological activity to induce osteoclast formation. Most efficient was coating 40 mg cylinder of brushite cement with 800 ng RANKL. We have found that RANKL-coated brushite cement exhibits osteoclastogenic activity for at least 1 month at 37 degrees C. Thus, we developed a formulation of brushite cement with RANKL - a synthetic bone graft that is similar to autografts in its ability to actively induce osteoclastogenesis.

Ascorbic acid accelerates osteoclast formation and death

Ascorbic acid (AA) plays a key role in bone formation. However controversy remains about the effect of AA on cells responsible for bone destruction, osteoclasts. We investigated the effect of AA on osteoclastogenesis using primary mouse bone marrow cultures and monocytic RAW 264.7 cells treated with osteoclastogenic factors RANKL and MCSF. Treatment with AA resulted in significant increase in osteoclast number, size and nucleation. To assess osteoclast oxidative stress level, a ratio of reduced (GSH) to oxidized (GSSG) glutathione and the total glutathione content (GSH(t)) were evaluated. Osteoclast differentiation was associated with a decrease in GSH/GSSG and GSH(t). AA induced further decrease in both parameters, and resulted in significant production of H(2)O(2), indicating its pro-oxidant action. At low concentration, H(2)O(2) induced similar effects to AA, although less potently, and catalase partially inhibited AA-induced osteoclastogenesis. To assess the modification in osteoclast metabolism, the mitochondrial activity was evaluated using JC-1 and the ATP levels were assessed. Osteoclast formation was associated with the increase in mitochondrial activity and ATP concentration, which were further increased in the presence of AA. Importantly, the stimulatory effect of AA was only evident at early phase of osteoclastogenesis, whereas at the late stage AA significantly accelerated osteoclast death. Thus, during osteoclastogenesis AA acts as an oxidant, first stimulating osteoclast formation, but later limiting osteoclast lifespan. This duality of AA action allows reconciling the stimulatory action of AA on osteoclastogenesis observed in vitro with an overall attenuation of bone resorption in the presence of AA observed in vivo.

Magnesium-sputtered titanium for the formation of bioactive coatings.

Osteoconductive coatings may improve the clinical performance of implanted metallic biomaterials. Several low-temperature coating methods have been reported where a supersaturated solution is used to deposit typically apatitic materials. However, due to the very low solubility of apatite, the concentration of calcium and phosphate ions attainable in a supersaturated solution is relatively low ( approximately 1-2mM), thus coating formation is slow, with several solution changes required to form a uniform and clinically relevant coating. In order to avoid this problem, we present a novel method where substrates were initially sputter coated with pure magnesium metal and then immersed in differing phosphate solutions. In this method, upon immersion the implant itself becomes the source of cations and only the anions to be incorporated into the coating are present in solution. These ions react rapidly, forming a continuous coating and avoiding problems of premature non-localized precipitation. The different coatings resulting from varying the phosphate solutions were then characterized in terms of morphology and composition by microscopy and chemical analyses. Upon immersion of the sputter-coated metals into ammonium phosphate solution, it was found that a uniform struvite (MgNH(4)PO(4).6H(2)O) coating was formed. Upon subsequent immersion into a calcium phosphate solution, stable coatings were formed. The coated surfaces also enhanced both osteoblastic cellular adhesion and cell viability compared to bare titanium. The concept of sputter-coating a reactive metal to form an adherent inorganic metal coating appears promising in the field of developing rapid-forming low-temperature bioceramic coatings.

Tumor-supportive and Osteoclastogenic Changes Induced by Breast Cancer-derived Factors Are Reversed by Inhibition of γ-Secretase

During breast cancer metastasis to bone, tumor cells home to bone marrow, likely targeting the stem cell niche, and stimulate osteoclasts, which mediate osteolysis required for tumor expansion. Although osteoblasts contribute to the regulation of the hematopoietic stem cell niche and control osteoclastogenesis through production of proresorptive cytokine RANKL (receptor activator of NF-κB ligand), their role in cancer metastases to bone is not fully understood. C57BL/6J mouse bone marrow cells were treated for 3–12 days with ascorbic acid (50 μg/ml) in the presence or absence of 10% medium conditioned by breast carcinoma cells MDA-MB-231, 4T1, or MCF7. Treatment with cancer-derived factors resulted in a sustained 40–60% decrease in osteoblast differentiation markers, compared with treatment with ascorbic acid alone, and induced an osteoclastogenic change in the RANKL/osteoprotegerin ratio. Importantly, exposure of bone cells to breast cancer-derived factors stimulated the subsequent attachment of cancer cells to immature osteoblasts. Inhibition of γ-secretase using pharmacological inhibitors DAPT and Compound E completely reversed cancer-induced osteoclastogenesis as well as cancer-induced enhancement of cancer cell attachment, identifying γ-secretase activity as a key mediator of these effects. Thus, we have uncovered osteoblasts as critical intermediary of premetastatic signaling by breast cancer cells and pinpointed γ-secretase as a robust target for developing therapeutics potentially capable of reducing both homing and progression of cancer metastases to bone.

Characterization of printed PLA scaffolds for bone tissue engineering

Autografts remain the gold standard for orthopedic transplantations. However, to overcome its limitations, bone tissue engineering proposes new strategies. This includes the development of new biomaterials such as synthetic polymers, to serve as scaffold for tissue production. The objective of this present study was to produce poly(lactic) acid (PLA) scaffolds of different pore size using fused deposition modeling (FDM) technique and to evaluate their physicochemical and biological properties. Structural, chemical, mechanical, and biological characterizations were performed. We successfully fabricated scaffolds of three different pore sizes. However, the pore dimensions were slightly smaller than expected. We found that the 3D printing process induced decreases in both, PLA molecular weight and degradation temperatures, but did not change the semicrystalline structure of the polymer. We did not observe any effect of pore size on the mechanical properties of produced scaffolds. After the sterilization by γ irradiation, scaffolds did not exhibit any cytotoxicity towards human bone marrow stromal cells (HBMSC). Finally, after three and seven days of culture, HBMSC showed high viability and homogenous distribution irrespective of pore size. Thus, these results suggest that FDM technology is a fast and reproducible technique that can be used to fabricate tridimensional custom-made scaffolds for tissue engineering.

Moderate excess of pyruvate augments osteoclastogenesis

Summary Cell differentiation leads to adaptive changes in energy metabolism. Conversely, hyperglycemia induces malfunction of many body systems, including bone, suggesting that energy metabolism reciprocally affects cell differentiation. We investigated how the differentiation of bone-resorbing osteoclasts, large polykaryons formed through fusion and growth of cells of monocytic origin, is affected by excess of energy substrate pyruvate and how energy metabolism changes during osteoclast differentiation. Surprisingly, small increases in pyruvate (1–2 mM above basal levels) augmented osteoclastogenesis in vitro and in vivo, while larger increases were not effective in vitro. Osteoclast differentiation increased cell mitochondrial activity and ATP levels, which were further augmented in energy-rich conditions. Conversely, the inhibition of respiration significantly reduced osteoclast number and size. AMP-activated protein kinase (AMPK) acts as a metabolic sensor, which is inhibited in energy-rich conditions. We found that osteoclast differentiation was associated with an increase in AMPK levels and a change in AMPK isoform composition. Increased osteoclast size induced by pyruvate (1 mM above basal levels) was prevented in the presence of AMPK activator 5-amino-4-imidazole carboxamide ribonucleotide (AICAR). In keeping, inhibition of AMPK using dorsomorphin or siRNA to AMPK&ggr; increased osteoclast size in control cultures to the level observed in the presence of pyruvate. Thus, we have found that a moderate excess of pyruvate enhances osteoclastogenesis, and that AMPK acts to tailor osteoclastogenesis to a cells bioenergetics capacity.

Regulation of Osteoclast Growth and Fusion by mTOR/raptor and mTOR/rictor/Akt

Osteoclasts are giant bone cells formed by fusion from monocytes and uniquely capable of a complete destruction of mineralized tissues. Previously, we have demonstrated that in energy-rich environment not only osteoclast fusion index (the number of nuclei each osteoclast contains), but also cytoplasm volume per single nucleus was increased. The goal of this study was to investigate the regulation of metabolic sensor mTOR during osteoclast differentiation in energy-rich environment simulated by addition of pyruvate. We have found that in the presence of pyruvate, the proportion of mTOR associated with raptor increased, while mTOR-rictor-mediated Akt phosphorylation decreased. Inhibition of mTOR with rapamycin (10 nM) significantly interfered with all aspects of osteoclastogenesis. However, rapamycin at 1 nM, which preferentially targets mTOR-raptor complex, was only effective in control cultures, while in the presence of pyruvate osteoclast fusion index was successfully increased. Inhibition of Akt drastically reduced osteoclast fusion, however in energy-rich environment, osteoclasts of comparable size were formed through increased cytoplasm growth. These data suggest that mTOR-rictor mediated Akt signaling regulates osteoclast fusion, while mTOR-raptor regulation of protein translation contributes to fusion-independent cytoplasm growth. We demonstrate that depending on the bioenergetics microenvironment osteoclastogenesis can adjust to occur through preferential multinucleation or through cell growth, implying that attaining large cell size is part of the osteoclast differentiation program.