Daniel Buhagiar

Offshore Floating Wind Turbine-driven Deep Sea Water Pumping for Combined Electrical Power and District Cooling

A new concept utilising floating wind turbines to exploit the low temperatures of deep sea water for space cooling in buildings is presented. The approach is based on offshore hydraulic wind turbines pumping pressurised deep sea water to a centralised plant consisting of a hydro-electric power system coupled to a large-scale sea water-cooled air conditioning (AC) unit of an urban district cooling network. In order to investigate the potential advantages of this new concept over conventional technologies, a simplified model for performance simulation of a vapour compression AC unit was applied independently to three different systems, with the AC unit operating with (1) a constant flow of sea surface water, (2) a constant flow of sea water consisting of a mixture of surface sea water and deep sea water delivered by a single offshore hydraulic wind turbine and (3) an intermittent flow of deep sea water pumped by a single offshore hydraulic wind turbine. The analysis was based on one year of wind and ambient temperature data for the Central Mediterranean that is known for its deep waters, warm climate and relatively low wind speeds. The study confirmed that while the present concept is less efficient than conventional turbines utilising grid-connected electrical generators, a significant portion of the losses associated with the hydraulic transmission through the pipeline are offset by the extraction of cool deep sea water which reduces the electricity consumption of urban air-conditioning units.

A Comparison of Two Pressure Control Concepts for Hydraulic Offshore Wind Turbines

Current research in offshore wind turbines is proposing a novel concept of using seawater-based hydraulics for large-scale power transmission and centralized electrical generation. The objective of this paper is to investigate the control of such an open-loop circuit, where a fixed line pressure is desirable for the sake of efficiency and stability. Pressure control of the open-loop hydraulic circuit presents an interesting control challenge due to the highly fluctuating flow rate along with the nonlinear behavior of the variable-area orifice used by the pressure controller. The present analysis is limited to a single turbine and an open-loop hydraulic line with a variable-area orifice at the end. A controller is proposed which uses a combination of feed-forward compensation for the nonlinear part along with a feedback loop for correcting any errors resulting from inaccuracies in the compensator model. A numerical model of the system under investigation is developed in order to observe the behavior of the controller and the advantages of including the feedback loop. An in-depth analysis is undertaken, including a sensitivity study of the compensator accuracy and a parametric analysis of the actuator response time. Finally, a Monte Carlo analysis was carried out in order to rank the proposed controller in comparison to a simple feed-forward controller and a theoretical optimally tuned controller. Results indicate an advantageous performance of the proposed method of feedback with feed-forward compensation, particularly its ability to maintain a stable line pressure in the face of high parameter uncertainty over a wide range of operating conditions, even with a relatively slow actuation system.

Performance Analysis of a Wind Turbine Driven Swash Plate Pump for Large Scale Offshore Applications

This paper deals with the performance modelling and analysis of offshore wind turbine-driven hydraulic pumps. The concept consists of an open loop hydraulic system with the rotor main shaft directly coupled to a swash plate pump to supply pressurised sea water. A mathematical model is derived to cater for the steady state behaviour of entire system. A simplified model for the pump is implemented together with different control scheme options for regulating the rotor shaft power. A new control scheme is investigated, based on the combined use of hydraulic pressure and pitch control. Using a steady-state analysis, the study shows how the adoption of alternative control schemes in a the wind turbine-hydraulic pump system may result in higher energy yields than those from a conventional system with an electrical generator and standard pitch control for power regulation. This is in particular the case with the new control scheme investigated in this study that is based on the combined use of pressure and rotor blade pitch control.

Control of an Open-Loop Hydraulic Offshore Wind Turbine Using a Variable-Area Orifice

The viability of offshore wind turbines is presently affected by a number of technical issues pertaining to the gearbox and power electronic components. Current work is considering the possibility of replacing the generator, gearbox and electrical transmission with a hydraulic system. Efficiency of the hydraulic transmission is around 90% for the selected geometries, which is comparable to the 94% expected for conventional wind turbines. A rotor-driven pump pressurises seawater that is transmitted across a large pipeline to a centralised generator platform. Hydroelectric energy conversion takes place in Pelton turbine. However, unlike conventional hydro-energy plants, the head available at the nozzle entry is highly unsteady. Adequate active control at the nozzle is therefore crucial in maintaining a fixed line pressure and an optimum Pelton turbine operation at synchronous speed. This paper presents a novel control scheme that is based on the combination of proportional feedback control and feed forward compensation on a variable area nozzle. Transient domain simulation results are presented for a Pelton wheel supplied by sea water from an offshore wind turbine-driven pump across a 10 km pipeline.Copyright