Daniel Gaudio

The difficult task of assessing perimortem and postmortem fractures on the skeleton: a blind text on 210 fractures of known origin.

The distinction between perimortem and postmortem fractures is an important challenge for forensic anthropology. Such a crucial task is presently based on macro‐morphological criteria widely accepted in the scientific community. However, several limits affect these parameters which have not yet been investigated thoroughly. This study aims at highlighting the pitfalls and errors in evaluating perimortem or postmortem fractures. Two trained forensic anthropologists were asked to classify 210 fractures of known origin in four skeletons (three victims of blunt force trauma and one natural death) as perimortem, postmortem, or dubious, twice in 6 months in order to assess intraobserver error also. Results show large errors, ranging from 14.8 to 37% for perimortem fractures and from 5.5 to 14.8% for postmortem ones; more than 80% of errors concerned trabecular bone. This supports the need for more objective and reliable criteria for a correct assessment of peri‐ and postmortem bone fractures.

Age estimation from canine volumes

AbstractTechniques for estimation of biological age are constantly evolving and are finding daily application in the forensic radiology field in cases concerning the estimation of the chronological age of a corpse in order to reconstruct the biological profile, or of a living subject, for example in cases of immigration of people without identity papers from a civil registry. The deposition of teeth secondary dentine and consequent decrease of pulp chamber in size are well known as aging phenomena, and they have been applied to the forensic context by the development of age estimation procedures, such as Kvaal–Solheim and Cameriere methods. The present study takes into consideration canines pulp chamber volume related to the entire teeth volume, with the aim of proposing new regression formulae for age estimation using 91 cone beam computerized scans and a freeware open-source software, in order to permit affordable reproducibility of volumes calculation.

Sexual dimorphism of canine volume: A pilot study

Sex assessment is a crucial part of the biological profile in forensic and archaeological context, but it can be hardly performed in cases of commingled and charred human remains where DNA tests often are not applicable. With time literature have analyzed the sexual dimorphism of teeth (and especially canines), but very few articles take into consideration the teeth volume, although with time several technologies have been introduced in order to assess 3D volume (CT-scan, laser scanner, etc.). This study aims at assessing the sexual dimorphism of dental and pulp chamber volumes of a sample of canines. Cone beam computed tomography analyses were performed by 87 patients (41 males and 46 females, aged between 15 and 83 years) for clinical purposes, and were acquired in order to measure canine volumes. Results show that the dental volume amounted to 0.745 cm(3) (SD 0.126 cm(3)) in males, 0.551 cm(3) (SD 0.130 cm(3)) with a statistically significant difference (p<0.01). A diagnostic threshold of 0.619 cm(3) was stated, which provides a percentage of correct answer of 80.5% in the chosen sample. The novel method was then applied with success to 7 archaeological: where in all the cases the results were concordant with those provided by the assessment of the cranium and pelvis. The study adds a contribution to the wide analysis of dental sexual dimorphism confirming the statistically significant differences of volume between males and females and providing a method for the diagnosis of sex applicable to forensic cases.

The application of cone-beam CT in the aging of bone calluses: a new perspective?

In the forensic and anthropological fields, the assessment of the age of a bone callus can be crucial for a correct analysis of injuries in the skeleton. To our knowledge, the studies which have focused on this topic are mainly clinical and still leave much to be desired for forensic purposes, particularly in looking for better methods for aging calluses in view of criminalistic applications. This study aims at evaluating the aid cone-beam CT can give in the investigation of the inner structure of fractures and calluses, thus acquiring a better knowledge of the process of bone remodeling. A total of 13 fractures (three without callus formation and ten with visible callus) of known age from cadavers were subjected to radiological investigations with digital radiography (DR) (conventional radiography) and cone-beam CT with the major aim of investigating the differences between DR and tomographic images when studying the inner and outer structures of bone healing. Results showed how with cone-beam CT the structure of the callus is clearly visible with higher specificity and definition and much more information on mineralization in different sections and planes. These results could lay the foundation for new perspectives on bone callus evaluation and aging with cone-beam CT, a user-friendly and skillful technique which in some instances can also be used extensively on the living (e.g., in cases of child abuse) with reduced exposition to radiation.

Assets and pitfalls of chemical and microscopic analyses on gunshot residues in skeletonized bodies: a report of five cases

In case of gunshot wounds, forensic anthropologists and pathologists have many tools at hand, and the assistance that chemical and microscopic investigations can provide in such scenarios is often valuable and crucial. However, the results of such analyses in the search of gunshot residues (GSR) ought not to be acritically considered. We report five cases where chemical (sodium rhodizonate) and microscopic (scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX)) analyses were performed for the search of GSR. Four cases concerned the forensic field and analyses on buried, charred, or submerged remains, whereas one case concerned the historical remains of a soldier of the First World War. In every case, the search for GSR with these techniques showed their persistence even after long periods and preservation in peculiar environments. However, chemical analyses provided their contribution, but in two cases, anthropological analyses provided crucial and solving results. The five cases show the indisputable usefulness of chemical and microscopic analyses in the search of GSR in gunshot wounds and especially how such residues may survive in time and in adverse environmental conditions. However, experts should always be dubious about some pitfalls (such as contamination) one can frequently find in these scenarios.

Reliability of Craniofacial Superimposition Using Three‐Dimension Skull Model

Craniofacial superimposition is a technique potentially useful for the identification of unidentified human remains if a photo of the missing person is available. We have tested the reliability of the 2D‐3D computer‐aided nonautomatic superimposition techniques. Three‐dimension laser scans of five skulls and ten photographs were overlaid with an imaging software. The resulting superimpositions were evaluated using three methods: craniofacial landmarks, morphological features, and a combination of the two. A 3D model of each skull without its mandible was tested for superimposition; we also evaluated whether separating skulls by sex would increase correct identifications. Results show that the landmark method employing the entire skull is the more reliable one (5/5 correct identifications, 40% false positives [FP]), regardless of sex. However, the persistence of a high percentage of FP in all the methods evaluated indicates that these methods are unreliable for positive identification although the landmark‐only method could be useful for exclusion.

Surface Curvature of Pelvic Joints from Three Laser Scanners: Separating Anatomy from Measurement Error

Recent studies have reported that quantifying symphyseal and auricular surface curvature changes on 3D models acquired by laser scanners has a potential for age estimation. However, no tests have been carried out to evaluate the repeatability of the results between different laser scanners. 3D models of the two pelvic joints were generated using three laser scanners (Custom, Faro, and Minolta). The surface curvature, the surface area, and the distance between co‐registered meshes were investigated. Close results were found for surface areas (differences between 0.3% and 2.4%) and for distance deviations (average <20 μm, SD <200 μm). The curvature values were found to be systematically biased between different laser scanners, but still showing similar trends with increasing phases/scores. Applying a smoothing factor to the 3D models, it was possible to separate anatomy from the measurement error of each instrument, so that similar curvature values could be obtained (p < 0.05) independent of the specific laser scanner.

Study on the criteria for assessing skull-face correspondence in craniofacial superimposition

Craniofacial superimposition has the potential to be used as an identification method when other traditional biological techniques are not applicable due to insufficient quality or absence of ante-mortem and post-mortem data. Despite having been used in many countries as a method of inclusion and exclusion for over a century it lacks standards. Thus, the purpose of this research is to provide forensic practitioners with standard criteria for analysing skull-face relationships. Thirty-seven experts from 16 different institutions participated in this study, which consisted of evaluating 65 criteria for assessing skull-face anatomical consistency on a sample of 24 different skull-face superimpositions. An unbiased statistical analysis established the most objective and discriminative criteria. Results did not show strong associations, however, important insights to address lack of standards were provided. In addition, a novel methodology for understanding and standardizing identification methods based on the observation of morphological patterns has been proposed.

World War One Italian and Austrian soldier identification project: DNA results of the first case

We report the results of an attempt to identify the supposed remains of a famous World War I (WWI) Italian soldier who was killed in battle along the Italian front in 1915. Thanks to the availability of offspring from both paternal and maternal lineage Y-STRs and mtDNA were analysed and both showed a clear exclusion scenario: the remains did not belong to the supposed war hero. This is the first effort of identification of the remains of soldiers who perished during World War I within a multidisciplinary project aimed at the retrieval of historical and cultural aspects linked to WWI, and the systematic study of the remains of soldiers and ultimately their identification. This last step involves both Italian and Austrian laboratories.

Effects of Cremation on Fetal Bones

The charring process is a weak point of anthropological analysis as it changes bone morphology and reduces information obtainable, specially in fetuses. This experiment aims at verifying the conservation of fetal bones after cremation. A total of 3138 fetuses of unknown sex and age were used, deriving from legal and therapeutic abortions from different hospitals of Milan. Cremations took place in modern crematoria. Nine cremation events were analyzed, each ranging from 57 to 915 simultaneously cremated fetuses. During the cremations, 4356 skeletal remains were recovered, 3756 of which (86.2%) were morphologically distinguishable. All types of fetal skeletal elements were found, with the exception of some cranial bones. Only 3.4% of individuals could be detected after the cremation process, because of the prevalence of abortions under 12 lunar weeks. All fire alterations were observed and the results were statistically analyzed. This pilot study confirmed the possibility of preservation of fetal skeletal elements after cremation.