Daniel M. Ammon

Surface chemical structure for soft contact lenses as a function of polymer processing

The surface chemistry and topography of cast-molded Etafilcon-A and doubled-sided lathed Etafilcon-A soft contact lenses were determined to be significantly different. The variations in surface chemical and morphologic structure between the two lenses were the result of contact lens manufacturing methods. The surface of the cast-molded Etafilcon-A had a consistently less rough surface compared to the doubled sided lathed Etafilcon-A as determined by atomic force microscopy. The surface of the doubled sided lathed Etafilcon-A contained primarily silicone and wax contamination in addition to minute amounts of HEMA. The cast-molded Etafilcon-A had an elemental and chemical content which was consistent with the polymer stoichiometry. Contact angle wettability profiles revealed inherent wettability differences between the two lenses types. The cast-molded Etafilcon-A had an inherently greater water wettability, polarity, and critical surface tension. This means that these two lenses cannot be compared as similar or identical lens materials in terms of surface composition. The manufacturing method used to produce a soft contact lens directly determines the surface elemental and chemical structure as well as the morphology of the finished lens material. These results suggest possible differences in the clinical comfort, spoilage, and lubricity felt during patient wear.

Biodegradable fumarate-based drug-delivery systems for ophthalmic applications.

The function of a photocrosslinked poly(propylene fumarate) (PPF)/poly(N-vinyl pyrrolidone) (PVP) matrix for the sustained release of three ophthalmic model drugs, acetazolamide (AZ), dichlorphenamide (DP), and timolol maleate (TM), was investigated. The drugs differ in molecular weight and degree of dissociation in aqueous environments; both are parameters that significantly influence drug diffusivity. AZ, DP, and TM-loaded cylindrical rods (10 mm length, 0.6 mm diameter) were fabricated by photoinduced cross-copolymerization of PPF and N-vinyl pyrrolidone (NVP) in molds. The released amounts of AZ, DP, TM, and NVP were determined by high-performance liquid chromatography (HPLC). The effects of drug properties and loading on the release kinetics were investigated. The in vitro release of AZ, DP, and TM was well sustained from the polymer matrices over a period of approximately 210, 270, and 250 days, respectively. The release kinetics correlated with the HPLC retention profiles of the different drugs. Following a small initial burst release (<10%), a dual modality release controlled by diffusion and bulk erosion was found for all drugs. Drug release rates of up to 4 microg/day were reached. Matrix drug loading generally affected the extent of the burst release, release kinetics, as well as the matrix water content and matrix degradation that were determined gravimetrically. Microcomputed tomography was used to image structural and dimensional changes of the devices. A preliminary rabbit implantation study revealed promising ocular biocompatibility of drug-free PPF/PVP matrices. All results indicate the potential of photocrosslinked PPF-based matrices as polymeric carriers for long-term ophthalmic drug delivery.

Detailed analysis of α,ω-bis(4-hydroxybutyl) poly(dimethylsiloxane) using GPC-MALDI TOF mass spectrometry

In this study the prepolymer α,ω-bis(4-hydroxybutyl) poly(dimethylsiloxane), used in the formulation of oxygen permeable films, is evaluated by gel permeation chromatography (GPC) combined with matrix assisted laser desorption ionization (MALDI) time of flight (TOF) mass spectrometry (MS). Two unexpected mass distributions are observed in the mass spectra. Reaction schemes for the formation of these distributions are proposed. A solution phase trimethylsilane end group modification was performed on the prepolymer to determine whether the unexpected mass distributions occur as impurities from synthesis or as artifacts from the MS process. Evaluation of the TMS modified prepolymer indicates the unexpected mass distributions indeed occur as impurities from the synthetic procedure. Average molecular weight values are determined by traditional GPC, direct MALDI-TOF MS, and GPC-MALDI-TOF MS methods and the results are compared.

Matrix Modifications Modulate Ophthalmic Drug Delivery From Photo-Cross-Linked Poly(propylene Fumarate)-Based Networks

In this work, different modifications of photo-cross-linked poly(propylene fumarate)/poly(N-vinyl pyrrolidone) (PPF/PNVP) matrices were studied for their effect on the release kinetics of two ophthalmic drugs. The hydrophilicity of solid PPF/PNVP matrices loaded with acetazolamide (AZ) or timolol maleate (TM) was increased by adding various amounts of poly(ethylene glycol) (PEG) or by increasing the amount of N-vinyl pyrrolidone (NVP) in the polymer mixture prior to cross-linking. The in vitro release studies that utilized high-performance liquid chromatography for quantification revealed highly accelerated drug release from the matrices with increasing contents of the hydrophilic modifier. AZ was released from matrices containing 5% PEG in 56 days, which equals approximately 25% of the release period found for the unmodified matrices. A comparable acceleration in drug release was found for TM-loaded samples modified with 5% PEG. These studies further revealed that 1% PEG is sufficient to shorten the TM release duration by one-third. A significant acceleration in drug release was also found for the samples that were fabricated from a PPF–NVP mixture with increased NVP content. Matrix water content and erosion were assessed gravimetrically. Micro-computed tomography was used to image structural changes of the release systems and shed light on the drug-release mechanism. This study showed that hydrophilic matrix modifications of PPF/PNVP matrices accelerate the drug release of two ophthalmic drugs and represent a suitable tool to adjust drug-release rates from PPF-based matrices for different therapeutic needs.

Ophthalmic applications of atomic force microscopy

Abstract Applications of atomic force microscopy (AFM) to the research and development of novel contact lens material and better manufacturing techniques are discussed. It is demonstrated that the technique of AFM is a useful and novel tool with which to examine the surfaces of soft contact lenses in both the hydrated and the dehydrated state. Specifically, the results of ophthalmic studies designed to examine the manufacturing processes on the nanoscale, benchmark lens roughnesses, and clinical collaborations are presented.