Daniel Parsons

Calibration strategies for the Cherenkov Telescope Array

The Central Calibration Facilities workpackage of the Cherenkov Telescope Array (CTA) observatory for very high energy gamma ray astronomy defines the overall calibration strategy of the array, develops dedicated hardware and software for the overall array calibration and coordinates the calibration efforts of the different telescopes. The latter include LED-based light pulsers, and various methods and instruments to achieve a calibration of the overall optical throughput. On the array level, methods for the inter-telescope calibration and the absolute calibration of the entire observatory are being developed. Additionally, the atmosphere above the telescopes, used as a calorimeter, will be monitored constantly with state-of-the-art instruments to obtain a full molecular and aerosol profile up to the stratosphere. The aim is to provide a maximal uncertainty of 10% on the reconstructed energy-scale, obtained through various independent methods. Different types of LIDAR in combination with all-sky-cameras will provide the observatory with an online, intelligent scheduling system, which, if the sky is partially covered by clouds, gives preference to sources observable under good atmospheric conditions. Wide-field optical telescopes and Raman Lidars will provide online information about the height-resolved atmospheric extinction, throughout the field-of-view of the cameras, allowing for the correction of the reconstructed energy of each gamma-ray event. The aim is to maximize the duty cycle of the observatory, in terms of usable data, while reducing the dead time introduced by calibration activities to an absolute minimum.

Calibration of the Cherenkov Telescope Array

The construction of the Cherenkov Telescope Array is expected to start soon. We will present the baseline methods and their extensions currently foreseen to calibrate the observatory. These are bound to achieve the strong requirements on allowed systematic uncertainties for the reconstructed gamma-ray energy and flux scales, as well as on the pointing resolution, and on the overall duty cycle of the observatory. Onsite calibration activities are designed to include a robust and efficient calibration of the telescope cameras, and various methods and instruments to achieve calibration of the overall optical throughput of each telescope, leading to both inter-telescope calibration and an absolute calibration of the entire observatory. One important aspect of the onsite calibration is a correct understanding of the atmosphere above the telescopes, which constitutes the calorimeter of this detection technique. It is planned to be constantly monitored with state-of-the-art instruments to obtain a full molecular and aerosol profile up to the stratosphere. In order to guarantee the best use of the observation time, in terms of usable data, an intelligent scheduling system is required, which gives preference to those sources and observation programs that can cope with the given atmospheric conditions, especially if the sky is partially covered by clouds, or slightly contaminated by dust. Ceilometers in combination with all-sky-cameras are plannned to provide the observatory with a fast, online and full-sky knowledge of the expected conditions for each pointing direction. For a precise characterization of the adopted observing direction, wide-field optical telescopes and Raman Lidars are planned to provide information about the height-resolved and wavelength-dependent atmospheric extinction, throughout the field-of-view of the cameras.

Tools and Procedures for the CTA Array Calibration

The Cherenkov Telescope Array (CTA) is an international initiative to build the next generation ground-based very-high-energy gamma-ray observatory. Full sky coverage will be assured by two arrays, one located on each of the northern and southern hemispheres. Three different sizes of telescopes will cover a wide energy range from tens of GeV up to hundreds of TeV. These telescopes, of which prototypes are currently under construction or completion, will have different mirror sizes and fields-of-view designed to access different energy regimes. Additionally, there will be groups of telescopes with different optics system, camera and electronics design. Given this diversity of instruments, an overall coherent calibration of the full array is a challenging task. Moreover, the CTA requirements on calibration accuracy are much more stringent than those achieved with current Imaging Atmospheric Cherenkov Telescopes, like for instance: the systematic errors in the energy scale must not exceed 10%.In this contribution we present both the methods that, applied directly to the acquired observational CTA data, will ensure that the calibration is correctly performed to the stringent required precision, and the calibration equipment that, external to the telescopes, is currently under development and testing. Moreover, some notes about the operative procedure to be followed with both methods and instruments, will be described. The methods applied to the observational CTA data include the analysis of muon ring images, of carefully selected cosmic-ray air shower images, of the reconstructed electron spectrum and that of known gamma-ray sources and the possible use of stereo techniques hardware-independent. These methods will be complemented with the use of calibrated light sources located on ground or on board unmanned aerial vehicles.

On the origin of the very-high energy gamma-ray emission of the Galactic Center region

A. Viana∗1, F. Aharonian1, S. Gabici2, K. Kosack3, E. Moulin3, D. Parsons1 and R. Tuffs1 for the H.E.S.S. collaboration 1 Max-Planck-Institut für Kernphysik, P.O. Box 103980, D 69029, Heidelberg, Germany 2 APC, AstroParticule et Cosmologie, Université Paris Diderot, CNRS/IN2P3, CEA/Irfu, Observatoire de Paris, Sorbonne Paris Cité, 10, rue Alice Domon et Léonie Duquet, 75205 Paris Cedex 13, France 3 DSM/Irfu, CEA Saclay, F-91191 Gif-Sur-Yvette Cedex, France E-mail: aion.viana@mpi-hd.mpg.de