Daniel Taton

pH and Temperature Responsive Polymeric Micelles and Polymersomes by Self-Assembly of Poly[2-(dimethylamino)ethyl methacrylate]-b-Poly(glutamic acid) Double Hydrophilic Block Copolymers

The aqueous solution behavior of novel polypeptide-based double hydrophilic block copolymers (DHBCs), namely, poly[2-(dimethylamino)ethyl methacrylate]-b-poly(glutamic acid) (PDMAEMA-b-PGA), exhibiting pH- and temperature-responsiveness is presented using a combination of scattering techniques (light and neutron) and transmission electron microscopy. Close to the isoelectric point (IEP), direct or inverse electrostatic polymersomes are generated by electrostatic interactions developing between the two charged blocks and driving the formation of the hydrophobic membrane of the polymersomes, with the latter being stabilized in water by uncompensated charges. Under basic conditions, that is, when PDMAEMA is uncharged, the thermosensitivity of the DHBCs relates to the lower critical solution temperature (LCST) behavior of PDMAEMA around 40 degrees C. As a consequence, at pH = 11 and below this LCST, free chains of DHBC unimers are evidenced, while above the LCST the hydrophobicity of PDMAEMA drives the self-assembly of the DHBCs in a reversible manner. In this case, spherical polymeric micelles or polymersomes are obtained, depending on the PGA block length. These possibilities of variation in size and shape of morphologies that can be achieved as a function of temperature and/or pH variations open new routes in the development of multiresponsive nanocarriers for biomedical applications.

Direct Synthesis of Double Hydrophilic Statistical Di- and Triblock Copolymers Comprised of Acrylamide and Acrylic Acid Units via the MADIX Process

Double hydrophilic statistical, diblock and triblock copolymers comprised of acrylamide and acrylic acid units have been synthesized in aqueous medium using the MADIX process. Starting from an either monofunctional or difunctional xanthate, the resulting AB and ABA-type double hydrophilic block copolymers (DHBC) exhibited molar masses predetermined by the initial monomer/xanthate precursor molar ratio and polydispersity indices in the range 1.2–1.5. Batch copolymerizations yielded well-defined statistical copolymers that were chain-extended for the synthesis of novel poly- (acrylic acid-stat-acrylamide)-block-polyacrylamide DHBC.

N-Heterocyclic Carbene-Induced Zwitterionic Ring-Opening Polymerization of Ethylene Oxide and Direct Synthesis of α,ω-Difunctionalized Poly(ethylene oxide)s and Poly(ethylene oxide)-b-poly(ε-caprolactone) Block Copolymers

An N-heterocyclic carbene (NHC), namely, 1,3-bis-(diisopropyl)imidazol-2-ylidene (1), was demonstrated to bring about the metal-free ring-opening polymerization of ethylene oxide at 50 degrees C in dimethyl sulfoxide, in absence of any other reagents. Poly(ethylene oxide) (PEO) of polydispersities <1.2 and molar masses perfectly matching the [monomer]/[(1)] ratio could thus be obtained in quantitative yields, attesting to the controlled/living character of such carbene-initiated polymerizations. It is argued that (1) adds to ethylene oxide to form a zwitterionic species, namely 1,3-bis-(diisopropyl)imidazol-2-ylidinium alkoxide, that further propagates by a zwitterionic ring-opening polymerization (ZROP) mechanism. Through an appropriate choice of terminating agent NuH or NuSiMe(3) at the completion of the polymerization, a variety of end-functionalized PEO chains could be generated. In particular, alpha,omega-bis(hydroxy)-telechelic PEO, alpha-benzyl,omega-hydroxy, and alpha-azido,omega-hydroxy-difunctionalized PEOs were synthesized by NHC (1)-initiated ZROP, using H(2)O, PhCH(2)OH, and N(3)SiMe(3) as terminating agent, respectively. Characterization of these alpha,omega-difunctionalized PEOs by techniques such as (1)H NMR spectroscopy, MALDI-TOF spectrometry, and size exclusion chromatography confirmed the quantitative introduction of functional groups at both alpha and omega positions of the PEO chains and the formation of very narrow molar mass polymers. Finally, the synthesis of a poly(ethylene oxide)-b-poly(epsilon-caprolactone) diblock copolymer by sequential ZROP of the corresponding monomers was successfully achieved using (1) as organic initiator without isolation of the PEO block intermediate.

Imidazol(in)ium Hydrogen Carbonates as a Genuine Source of N-Heterocyclic Carbenes (NHCs): Applications to the Facile Preparation of NHC Metal Complexes and to NHC-Organocatalyzed Molecular and Macromolecular Syntheses

Anion metathesis of imidazol(in)ium chlorides with KHCO(3) afforded an easy one step access to air stable imidazol(in)ium hydrogen carbonates, denoted as [NHC(H)][HCO(3)]. In solution, these compounds were found to be in equilibrium with their corresponding imidazol(in)ium carboxylates, referred to as N-heterocyclic carbene (NHC)-CO(2) adducts. The [NHC(H)][HCO(3)] salts were next shown to behave as masked NHCs, allowing for the NHC moiety to be readily transferred to both organic and organometallic substrates, without the need for dry and oxygen-free conditions. In addition, such [NHC(H)][HCO(3)] precursors were successfully investigated as precatalysts in two selected organocatalyzed reactions of molecular chemistry and polymer synthesis, namely, the benzoin condensation reaction and the ring-opening polymerization of d,l-lactide, respectively. The generation of NHCs from [NHC(H)][HCO(3)] precursors occurred via the formal loss of H(2)CO(3)via a concerted low energy pathway, as substantiated by Density Functional Theory (DFT) calculations.

Micelles and polymersomes obtained by self-assembly of dextran and polystyrene based block copolymers.

The self-assembly of dextran-block-polystyrene (dex-b-PS) block copolymers was investigated in solution. The hydrophobic PS weight fraction in these block copolymers ranges from 7 to 92% w/w, whereas the average number molar mass of dextran was kept constant at 6600 gmol(-1). Self-assembly by direct dissolution in water could be performed only for block copolymers with a low hydrophobic content (7% w/w), whereas mixtures of tetrahydrofuran and dimethylsulfoxide were required for higher PS content, before transferring the structures into water. Core-shell micelles, ovoïds, and vesicles could be identified upon characterization by light and neutrons scattering, atomic force microscopy, and transmission electron microscopy. Most of the morphologies observed were not expected considering the chemical composition of the block copolymers. Finally, the size and shape of these nanoparticles were fixed upon cross-linking the dextran block through reaction of the hydroxyl groups with divinylsulfone. The role of the dextran conformation on the self-assembly process is discussed.

Synthesis and Characterization of Linear, Hyperbranched, and Dendrimer-Like Polymers Constituted of the Same Repeating Unit

The synthesis of a linear polymer that includes both P=N and P=S double bonds, and P-O and P-C single bonds is reported by using two different paths that involve deprotection reactions and the Staudinger reaction. The preparation of hyperbranched polymers made up of OC6H4P(Ph)2=N-P=S repeating units is also described. Five generations of dendrimers originating from the same building blocks were prepared. The characterisation of all these phosphorus-based macromolecular architectures (solution behaviour, size exclusion chromatography, intrinsic viscosity, thermal behaviour) revealed marked differences in their respective behaviour.

Imidazolium Hydrogen Carbonates versus Imidazolium Carboxylates as Organic Precatalysts for N-Heterocyclic Carbene Catalyzed Reactions

Imidazolium-2-carboxylates (NHC-CO(2) adducts, 3) and (benz)imidazolium hydrogen carbonates ([NHC(H)][HCO(3)], 4) were independently employed as organic precatalysts for various molecular N-heterocyclic carbene (NHC) catalyzed reactions. NHC-CO(2) adducts were obtained by carboxylation in THF of related free NHCs (2), while the synthesis of [NHC(H)][HCO(3)] precursors was directly achieved by anion metathesis of imidazolium halides (1) using potassium hydrogen carbonate (KHCO(3)) in methanolic solution, without the need for the prior preparation of free carbenes. Thermogravimetric analysis (TGA) and TGA coupled with mass spectrometry (TGA-MS) of most [NHC(H)][HCO(3)] precursors 4 showed a degradation profile in stages, with either a concomitant or a stepwise release of H(2)O and CO(2), between 108 and 280 °C, depending on the nature of the azolium and substituents. In solution, NHC generation from both [NHC(H)][HCO(3)] salts and NHC-CO(2) adducts could be achieved at room temperature, most likely by a simple solvation effect. Both types of precursors proved efficient for organocatalyzed molecular reactions, including cyanosilylation, benzoin condensation, and transesterification reactions. The catalytic efficiencies of NHC-CO(2) adducts 3 were found to be approximately 3 times higher than those of their [NHC(H)][HCO(3)] counterparts 4.

Metal-free and solvent-free access to α,ω-heterodifunctionalized poly(propylene oxide)s by N-heterocyclic carbene-induced ring opening polymerization

A N-heterocyclic carbene, namely, 1,3-bis-(diisopropyl)imidazol-2-ylidene either directly initiates or catalyzes the metal-free ring opening polymerization of neat propylene oxide at 50 degrees C, affording well-defined alpha,omega-heterodifunctionalized poly(propylene oxide) oligomers.

Dendrimer-like polymers: a new class of structurally precise dendrimers with macromolecular generations

A new class of highly branched polymers referred to as dendrimer-like polymers has been developed in the last decade, the first synthetic example dating back to 1995. Dendrimer-like polymers exhibit molecular features similar to those of regular dendrimers, such as the presence of a central core, a precise number of branching points and terminal functions, but comprise of generations of macromolecular size between their branching junctions. In this highlight article synthetic strategies to dendrimer-like polymers are reviewed as well as some of their characteristic properties. A special emphasis is placed on synthetic methodologies designed in our group to generate dendrimer-like homopolymers and block copolymers by iterative divergent approaches based on anionic ring-opening polymerization of ethylene oxide and atom transfer radical polymerization. Are also thoroughly described the methods used for selectively branching polymeric chain-ends and introducing ω-geminal functionalities from which further macromolecular generations could be grown.

Synthesis of hybrid dendrimer-star polymers by the RAFT process

A first generation phosphorus-containing dendrimer with twelve terminal benzyl dithiobenzoate functions was designed and subsequently used as a multifunctional agent to derive hybrid star copolymers consisting of a dendritic core surrounded by twelve polystyrene branches by reversible addition-fragmentation chain transfer (RAFT).