Daniela Plana

Anionic Surfactant Ionic Liquids with 1-Butyl-3-methyl-imidazolium Cations: Characterization and Application

For the first time a series of anionic surfactant ionic liquids (SAILs) has been synthesized based on organic surfactant anions and 1-butyl-3-methyl-imidazolium cations. These compounds are more environmentally friendly and chemically tunable as compared to other common ionic liquids. A detailed investigation of physicochemical properties highlights potential applications from battery design to reaction control, and studies into aqueous aggregation behavior, as well as structuring in pure ILs, point to possible uses in electrochemistry.

Tuning CO2 electroreduction efficiency at Pd shells on Au nanocores

The faradaic efficiency of CO2 electroreduction is significantly affected by the thickness of Pd nanoshells on Au cores. The ratio of hydrogen evolution to CO2 reduction was determined by differential electrochemical mass spectrometry. Decreasing the Pd shell thickness from 10 to 1 nm leads to a twofold increase in faradaic efficiency.

Kinetics of Electroless Deposition: The Copper-Dimethylamine Borane System

A kinetic study of the electroless deposition of copper on gold, using dimethylamine borane (DMAB) as a reducing agent, has been carried out. The copper deposition rate in the electroless bath was determined to be 50 nm min(-1), through electrochemical stripping of the copper deposits as well as from direct measurements of the film thickness using atomic force microscopy (AFM). Comparison with a galvanic cell setup, where the two half-reactions were physically separated, yielded a lower deposition rate of 30 nm min(-1). An important kinetic effect of the surface on the oxidation of the reducing agent, and thus on the overall process, was therefore revealed. The efficiency of the process was measured over time, revealing the contribution of side reactions in the cathodic half-cell, particularly during the initial stages of the electroless process.

Growth of epitaxial Pt1-xPbx alloys by surface limited redox replacement and study of their adsorption properties.

The surface limited redox replacement (SLRR) method has been used to design two-dimensional Pt-Pb nanoalloys with controlled thickness, composition, and structure. The electrochemical behavior of these alloys has been systematically studied as a function of alloy composition. A single-cell, two-step SLRR protocol based on the galvanic replacement of underpotentially deposited monolayers of Pb with Pt was used to grow epitaxial Pt1-xPbx (x < 0.1) alloys of up to 10 ML thickness on Au substrates. It is shown that by varying the terminating potential of the galvanic replacement step, the Pb atomic content can be controlled in the films. Electrochemical analysis of the alloys showed that the adsorption of both H and CO exhibits similar, and systematic, decreases with small increases in the Pb content. These measurements, commonly used in electrocatalysis for the determination of active surface areas of Pt, suggested area values much lower than those expected based on the net Pt composition in the alloy as measured by XPS. These results show that Pb has a strong screening effect on the adsorption of both H and CO. Moreover, changes in alloy composition result in a negative shift in the potential of the peaks of CO oxidation that scales with the increase of Pb content. The results suggest electronic and bifunctional effects of incorporated Pb on the electrochemical behavior of Pt. The study illustrates the potential of the SLRR methodology, which could be employed in the design of 2-dimensional bimetallic Pt nanoalloys for fundamental studies of electrocatalytic behavior in fuel cell reactions dependent on the nature of alloying metal and its composition.

Electrochemical Reduction of Carbon Dioxide at Gold-Palladium Core–Shell Nanoparticles: Product Distribution versus Shell Thickness

The electrocatalytic reduction of CO2 at carbon‐supported Au‐Pd core–shell nanoparticles is investigated systematically as a function of the Pd shell thickness. Liquid‐ and gas‐phase products were determined by off‐line 1H NMR spectroscopy and on‐line electrochemical mass spectrometry. Our results uncover the relationship between the nature of the products generated and the Pd shell thickness. CO and H2 are the only products generated at 1 nm thick shells, whereas shells of 5 and 10 nm produced HCOO−, CH4 and C2H6. The concentration of HCOO− detected in the electrolyte was dependent on the applied potential and reached a maximum Faradaic efficiency of 27 % at −0.5 V versus the reversible hydrogen electrode for 10 nm thick shells. We conclude that collisions between absorbed hydrogen at relaxed Pd lattices and strongly bound “CO‐like” intermediates promote the complete hydrogenation to C1 and C2 alkanes without the generation of other products, such as alcohols and aldehydes.

Surface Activation of Pt Nanoparticles Synthesised by “Hot Injection” in the Presence of Oleylamine

Oleylamine (OA) based “hot injection” colloidal synthesis offers a versatile approach to the synthesis of highly monodisperse metallic and multi-metallic alloyed nanostructures in the absence of potentially toxic and unstable phosphine compounds. For application in heterogeneous catalysis and electrocatalysis, the adsorbed OA species at the metal surfaces should be effectively removed without compromising the structure and composition of the nanostructures. Herein, we investigate the removal of OA from colloidal Pt nanoparticles through 1) “chemical methods” such as washing in acetic acid or ethanol, and ligand exchange with pyridine; and 2) thermal pre-treatment between 185 and 400 °C in air, H2 or Ar atmospheres. The electrochemical reactivity of Pt nanoparticles is acutely affected by the presence of surface organic impurities, making this material ideal for monitoring the effectiveness of OA removal. The results showed that thermal treatment in Ar at temperatures above 400 °C provides highly active particles, with reactivity comparable to the benchmark commercial catalyst, Pt/ETEK. The mechanism involved in thermal desorption of OA was also investigated by thermogravimetric analysis coupled to mass spectrometry (TGA-MS). Oxidation of HCOOH and adsorbed CO in acidic solution were used as test reactions to assess the Pt electrocatalytic activity.

Charge Transport Across High Surface Area Metal/Diamond Nanostructured Composites

High surface area composites featuring metal nanostructures and diamond particles have generated a lot of interest in the fields of heterogeneous catalysis, electrocatalysis, and sensors. Diamond surfaces provide a chemically robust framework for active nanostructures in comparison with sp(2) carbon supports. The present paper investigates the charge transport properties of high surface area films of high-pressure, high-temperature diamond particles in the presence and absence of metal nanostructures, employing electrochemical field-effect transistors. Oxygen- and hydrogen-terminated surfaces were generated on 500 nm diamond powders. Homogeneously distributed metal nanostructures, with metal volume fractions between ca. 5 and 20%, were either nucleated at the diamond particles by impregnation or incorporated from colloidal solution. Electrochemical field-effect transistor measurements, employing interdigitated electrodes, allowed the determination of composite conductivity as a function of electrode potential, as well as in air. In the absence of metal nanostructures, the lateral conductivity of the diamond assemblies in air is increased by over one order of magnitude upon hydrogenation of the particle surface. This observation is consistent with studies at diamond single crystals, although the somewhat modest change in conductivity suggests that charge transport is not only determined by the intrinsic surface conductivity of individual diamond particles but also by particle-to-particle charge transfer. Interestingly, the latter contribution effectively controls the assembly conductivity in the presence of an electrolyte solution as the difference between hydrogenated and oxygenated particles vanishes. The conductivity in the presence of metal nanoparticles is mainly determined by the metal volume fraction, while diamond surface termination and the presence of electrolyte solutions exert only minor effects. The experimental trends are discussed in terms of the electrochemical formation of charge carriers in the diamond particles, percolation theory, and charge screening at the double layer.

Real-Time Tracking of Metal Nucleation via Local Perturbation of Hydration Layers

The real-time visualization of stochastic nucleation events at electrode surfaces is one of the most complex challenges in electrochemical phase formation. The early stages of metal deposition on foreign substrates are characterized by a highly dynamic process in which nanoparticles nucleate and dissolve prior to reaching a critical size for deposition and growth. Here, high-speed non-contact lateral molecular force microscopy employing vertically oriented probes is utilized to explore the evolution of hydration layers at electrode surfaces with the unprecedented spatiotemporal resolution, and extremely low probe-surface interaction forces required to avoid disruption or shielding the critical nucleus formation. To the best of our knowledge, stochastic nucleation events of nanoscale copper deposits are visualized in real time for the first time and a highly dynamic topographic environment prior to the formation of critical nuclei is unveiled, featuring formation/re-dissolution of nuclei, two-dimensional aggregation and nuclei growth.Electrochemical deposition is important for industrial processes however, tracking the early stages of metallic phase nucleation is challenging. Here, the authors visualize the birth and growth of metal nuclei at electrode surfaces in real time via high-speed non-contact lateral molecular force microscopy.

Electrochemical crystallization of spatially organized copper microwire arrays within biomineralized (dentine) templates

Macroporous biomineralized composites in the form of thin slices of tooth dentine were used to prepare oriented arrays of high aspect ratio copper microwires by template-directed electrochemical deposition. The coaligned wires were 1 to 4 μm in thickness, and spatially separated throughout the dentine matrix to produce a metallized inorganic–organic biocomposite that exhibited ohmic conductivity and enhanced mechanical hardness. Utilization of porous biomineral templates for the crystallization of metallic microwire arrays offers a novel step towards the low temperature fabrication of multi-functional conductive hybrid composites with integrated bioinspired properties.