Danilo J. Carastan

Polystyrene/clay nanocomposites

Abstract Polystyrene has been widely studied as a matrix in nanocomposites, because it is a model amorphous polymer. The present article provides an extensive review of studies on polystyrene/layered silicate nanocomposites. Emphasis is given on different preparation methods, clay surfactants and polymer modifications used to obtain the materials, and their engineering properties, such as mechanical, rheological and thermal properties.

Morphological evolution of block copolymer nanocomposites submitted to extensional flows

In this work, the effect of extensional flow on the morphology of polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene (SEBS) triblock copolymers and their clay-containing nanocomposites was evaluated. Four types of SEBS copolymers with different block compositions and cylindrical morphology were chosen to understand the effects of cylinder orientation and state of clay dispersion on the evolution of morphology during extensional flow. The effect of clay concentration (ranging from 2.5 to 7.5 wt. %) was also studied. The samples were subjected to extensional flow using a Sentmanat extensional rheometer attached to a rotational rheometer at Hencky strain rates varying from 0.01 to 20 s−1. Small angle X-ray scattering analysis was subsequently performed to evaluate the morphological changes caused by extensional flow. When preoriented block copolymers [SEBS-30% PS (polystyrene)] and their nanocomposites undergo elongation, the styrene cylinders and clay nanoparticles align themselves in the flow direction...

Interfacial tension between polystyrene and a liquid crystal polymer

In this work contact angles formed by drops of polystyrene (PS) on a surface of liquid crystalline polymer (LCP) Vectra A910 were measured as a function of temperature for temperatures ranging from 180 to 230°C. The values were used together with the surface tensions of both polymers to evaluate the interfacial tension between PS and the LCP. In order to validate the method used to evaluate this interfacial tension, the interfacial tension between polypropylene (PP) and PS was evaluated using values of contact angles formed by a drop of PP on PS and the values of surface tension of both polymers in the molten state. The values of interfacial tension between PP and PS corroborated well the values obtained using the pendant drop method. The values of interfacial tension between PS and the LCP were shown to decrease linearly with temperature.