Daohua Sun

Biosynthesis of silver and gold nanoparticles by novel sundried Cinnamomum camphora leaf

The synthesis of nanocrystals is in the limelight in modern nanotechnology. Biosynthesis of nanoparticles by plant extracts is currently under exploitation. Not only could silver nanoparticles ranging from 55 to 80 nm in size be fabricated, but also triangular or spherical shaped gold nanoparticles could be easily modulated by reacting the novel sundried biomass of Cinnamomum camphora leaf with aqueous silver or gold precursors at ambient temperature. The marked difference of shape control between gold and silver nanoparticles was attributed to the comparative advantage of protective biomolecules and reductive biomolecules. The polyol components and the water-soluble heterocyclic components were mainly responsible for the reduction of silver ions or chloroaurate ions and the stabilization of the nanoparticles, respectively. The sundried leaf in this work was very suitable for simple synthesis of nanoparticles.

Catalytic hydrolysis of ammonia borane via cobalt palladium nanoparticles.

Monodisperse 8 nm CoPd nanoparticles (NPs) with controlled compositions were synthesized by the reduction of cobalt acetylacetonate and palladium bromide in the presence of oleylamine and trioctylphosphine. These NPs were active catalysts for hydrogen generation from the hydrolysis of ammonia borane (AB), and their activities were composition dependent. Among the 8 nm CoPd catalysts tested for the hydrolysis of AB, the Co(35)Pd(65) NPs exhibited the highest catalytic activity and durability. Their hydrolysis completion time and activation energy were 5.5 min and 27.5 kJ mol(-1), respectively, which were comparable to the best Pt-based catalyst reported. The catalytic performance of the CoPd/C could be further enhanced by a preannealing treatment at 300 °C under air for 15 h with the hydrolysis completion time reduced to 3.5 min. This high catalytic performance of Co(35)Pd(65) NP catalyst makes it an exciting alternative in pursuit of practical implementation of AB as a hydrogen storage material for fuel cell applications.

A Facile Synthesis of MPd (M = Co, Cu) Nanoparticles and Their Catalysis for Formic Acid Oxidation

Monodisperse CoPd nanoparticles (NPs) were synthesized and studied for catalytic formic acid (HCOOH) oxidation (FAO). The NPs were prepared by coreduction of Co(acac)(2) (acac = acetylacetonate) and PdBr(2) at 260 °C in oleylamine and trioctylphosphine, and their sizes (5-12 nm) and compositions (Co(10)Pd(90) to Co(60)Pd(40)) were controlled by heating ramp rate, metal salt concentration, or metal molar ratios. The 8 nm CoPd NPs were activated for HCOOH oxidation by a simple ethanol wash. In 0.1 M HClO(4) and 2 M HCOOH solution, their catalytic activities followed the trend of Co(50)Pd(50) > Co(60)Pd(40) > Co(10)Pd(90) > Pd. The Co(50)Pd(50) NPs had an oxidation peak at 0.4 V with a peak current density of 774 A/g(Pd). As a comparison, commercial Pd catalysts showed an oxidation peak at 0.75 V with peak current density of only 254 A/g(Pd). The synthesis procedure could also be extended to prepare CuPd NPs when Co(acac)(2) was replaced by Cu(ac)(2) (ac = acetate) in an otherwise identical condition. The CuPd NPs were less active catalysts than CoPd or even Pd for FAO in HClO(4) solution. The synthesis provides a general approach to Pd-based bimetallic NPs and will enable further investigation of Pd-based alloy NPs for electro-oxidation and other catalytic reactions.

Rapid preparation process of silver nanoparticles by bioreduction and their characterizations

Abstract Bioreduction as a novel nanoparticle synthesizing technology attracts increasing attention. Dried cells of the bacterium Aeromonas sp. SH10 rapidly reduced [Ag(NH 3 ) 2 ] + to Ag 0 in the solution into which some amount of OH − was introduced. The surface plasmon resonance centered at 425 nm on the UV-vis spectra and five broad Bragg reflections on the XRD pattern showed that stable silver nanoparticles were formed during the bioreduction process. TEM and SEM observations suggested that the silver nanoparticles were uniform in size and well dispersed on the cells and in the solution. Therefore, silver nanoparticles could be prepared rapidly by this bioreduction technology.

Green synthesis of Au–Ag alloy nanoparticles using Cacumen platycladi extract

An environmentally-friendly method for the synthesis of Au–Ag alloy nanoparticles with controlled composition is proposed. The method involves the simultaneous bioreduction of HAuCl4 and AgNO3 using Cacumen Platycladi leaf extract at 90 °C. The formation of the Au–Ag alloy nanoparticles was monitored by recording the absorbance, using UV-visible light spectroscopy as a function of the reaction time and the formation process. The as-synthesized nanoparticles were characterized by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy to verify the nature of the alloy. The Fourier transform infrared spectra show that the CC, N–H, (NH) CO, and –OH groups in the C. Platycladi extract served as a reducing agent, whereas the peptides or proteins prevented the aggregation of alloy nanoparticles. The process can be described as a purely “green technique” because no additional synthetic reagents were used as reductants or stabilizers.

Plant-mediated synthesis of platinum nanoparticles and its bioreductive mechanism.

Pt nanoparticles (PtNPs) were biologically synthesized by reducing Na2PtCl4 with Cacumen Platycladi Extract (CPE). The effects of reaction temperature, initial Pt(II) concentration, and CPE percentage on Pt(II) conversion and the size distribution of the PtNPs were studied. The results showed that the Pt(II) conversion rate reached 95.9% and that PtNPs measuring 2.4±0.8nm were obtained under the following conditions: reaction temperature, 90°C; CPE percentage, 70%; initial Pt(II) concentration, 0.5mM; reaction time, 25h. In addition, the bioreduction of Pt(II) was attributed to reducing sugars and flavonoids rather than proteins. The elucidation of bioreductive mechanism of Pt(II) ions was achieved by investigating the changes that occurred in the reducing sugar, flavonoid and protein concentrations in the plant extract, leading to a good insight into the formation mechanism of such biosynthesized PtNPs.

Biogenic flower-shaped Au–Pd nanoparticles: synthesis, SERS detection and catalysis towards benzyl alcohol oxidation

∼40 nm flower-shaped Au–Pd bimetallic nanoparticles were prepared in a facile and eco-friendly way based on the simultaneous bioreduction of HAuCl4 and Na2PdCl4 with ascorbic acid and Cacumen Platycladi leaf extract at room temperature. Characterization techniques, such as transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction, were employed to confirm that the as-synthesized nanoparticles were alloys. The obtained flower-shaped Au–Pd alloy nanoparticles exhibited an excellent surface enhanced Raman spectroscopic activity with rhodamine 6G and efficient catalytic ability for the oxidation of benzyl alcohol to benzaldehyde.

Quantitative nucleation and growth kinetics of gold nanoparticles via model-assisted dynamic spectroscopic approach

Lacking of quantitative experimental data and/or kinetic models that could mathematically depict the redox chemistry and the crystallization issue, bottom-to-up formation kinetics of gold nanoparticles (GNPs) remains a challenge. We measured the dynamic regime of GNPs synthesized by l-ascorbic acid (representing a chemical approach) and/or foliar aqueous extract (a biogenic approach) via in situ spectroscopic characterization and established a redox-crystallization model which allows quantitative and separate parameterization of the nucleation and growth processes. The main results were simplified as the following aspects: (I) an efficient approach, i.e., the dynamic in situ spectroscopic characterization assisted with the redox-crystallization model, was established for quantitative analysis of the overall formation kinetics of GNPs in solution; (II) formation of GNPs by the chemical and the biogenic approaches experienced a slow nucleation stage followed by a growth stage which behaved as a mixed-order reaction, and different from the chemical approach, the biogenic method involved heterogeneous nucleation; (III) also, biosynthesis of flaky GNPs was a kinetic-controlled process favored by relatively slow redox chemistry; and (IV) though GNPs formation consists of two aspects, namely the redox chemistry and the crystallization issue, the latter was the rate-determining event that controls the dynamic regime of the whole physicochemical process.

Plant-Mediated Fabrication and Surface Enhanced Raman Property of Flower-Like Au@Pd Nanoparticles

The flower-like nanostructures of an Au core and Pd petals with the average size of 47.8 nm were fabricated through the successive reduction of HAuCl4 and Na2PdCl4 at room temperature. During the synthesis, Cacumen Platycladi leaf extract served as weak reductant and capping agent. Characterization techniques such as Energy-dispersive X-ray spectroscopy, UV-Vis spectroscopy, and X-ray diffraction characterizations were employed to confirm that the as-synthesized nanoparticles have the structure of core-shell. The obtained core-shell nanoflowers exhibited good surface enhanced Raman spectroscopic activity with Rhodamine 6G.

Novel AuPd nanostructures for hydrogenation of 1,3-butadiene

Exotic AuPd bimetallic nanoflowers (NFs) are facilely synthesized using a microorganism-mediated, cetyltrimethylammonium chloride (CTAC)-directed method at room temperature. The NFs consist of one-dimensional long pedicels and three-dimensional open horns. The effect of cell dosage and feed concentrations of ascorbic acid (AA), CTAC and metal precursors on the morphology of the bimetallic nanostructures were studied. The results showed that all the obtained materials were alloys with Pd-enriched surfaces. The diameters of the horns decreased, while those of the pedicels increased with increasing the feed concentration of Pd precursor. The presence of Pd precursor was vital for the formation of the nanowire part of the NF structure. Furthermore, the AuPd-NF/microorganism materials exhibited excellent catalytic performance and durability toward the hydrogenation of 1,3-butadiene.