Daria Kuznetsova

Photobleaching and phototoxicity of KillerRed in tumor spheroids induced by continuous wave and pulsed laser illumination

The purpose of this study was to evaluate photobleaching of the genetically encoded photosensitizer KillerRed in tumor spheroids upon pulsed and continuous wave (CW) laser irradiation and to analyze the mechanisms of cancer cell death after the treatment. We observed the light-dose dependent mechanism of KillerRed photobleaching over a wide range of fluence rates. Loss of fluorescence was limited to 80% at light doses of 150 J/cm(2) and more. Based on the bleaching curves, six PDT regimes were applied for irradiation using CW and pulsed regimes at a power density of 160 mW/cm(2) and light doses of 140 J/cm(2) , 170 J/cm(2) and 200 J/cm(2). Irradiation of KillerRed-expressing spheroids in the pulsed mode (pulse duration 15 ns, pulse repetition rate 10 Hz) induced predominantly apoptotic cell death, while in the case of CW mode the cancer cells underwent necrosis. In general, these results improve our understanding of photobleaching mechanisms in GFP-like proteins and show the importance of appropriate selection of treatment mode for PDT with KillerRed. Representative fluorescence image of two KillerRed-expressing spheroids before and immediately after CW irradiation.

Comparative Analysis of Proliferation and Viability of Multipotent Mesenchymal Stromal Cells in 3D Scaffolds with Different Architectonics.

3D biodegradable materials (scaffolds) containing bioactive hydroxyapatite molecules fabricated by foaming in supercritical carbon dioxide and by selective laser sintering were used for culturing of mesenchymal stromal cells from the human adipose tissue. Experiments showed that stromal cells from the human adipose tissue adhered and proliferated on all studied types of structures. Addition of hyproxyapatite to the scaffold stimulated proliferation of stromal adipose tissue cells.

Two-photon FLIM of NAD(P)H and FAD in mesenchymal stem cells undergoing either osteogenic or chondrogenic differentiation

BackgroundMetabolic plasticity and the versatility of different lineages of stem cells as they satisfy their energy demands are not completely understood. In this study we investigated the metabolic changes in mesenchymal stem cells (MSCs) undergoing differentiation in two directions, osteogenic and chondrogenic, using two-photon fluorescence microscopy combined with FLIM.MethodsDifferentiation was induced by incubating the human bone marrow MSCs in osteogenic or chondrogenic mediums. Cellular metabolism was examined on the basis of the fluorescence of the metabolic cofactors NAD(P)H and FAD. The optical redox ratio (FAD/NAD(P)H) and the fluorescence lifetimes of NAD(P)H and FAD were traced using two-photon fluorescence microscopy combined with FLIM. The cells were imaged before the induction of differentiation (day 0) and on days 7, 14, and 21 of osteogenic and chondrogenic differentiation.ResultsBased on the data for the FAD/NAD(P)H redox ratio and on the fluorescence lifetimes of protein-bound NAD(P)H, we registered a metabolic shift toward a more glycolytic status in the process of MSC differentiation. The difference was that, in osteogenic differentiation, an increase in oxidative phosphorylation preceded the shift to the glycolytic status in the process of such MSC differentiation. The fluorescence lifetime characteristics of FAD indicated the stimulation of an unknown metabolic pathway, where protein-bound FAD participates.ConclusionsIn this study, probing of the metabolic status of MSCs during osteogenic and chondrogenic differentiation was implemented for the first time with the use of optical metabolic imaging of the two cofactors - NAD(P)H and FAD. Our data suggest that biosynthetic processes, associated, presumably, with the synthesis of collagen, drive energy metabolism in differentiating cells, and promote a metabolic shift from a more oxidative to a more glycolytic state.

The influence on biotissue laser resection of a strongly absorbing layer at the optical fiber tip

In this paper, we consider a method of laser resection using the silica glass core from which the cladding layer has been removed as the cutting part of a laser scalpel. An absorbing layer coating the silica fiber tip markedly alters its biotissue cutting characteristics. The results of histological studies of skin after exposure to a laser scalpel with and without a strongly absorbing coating (SAC) at a wavelength of 0.97 μm show that resection using a coated scalpel is more sparing. When an uncoated scalpel was used, skin injury was more apparent in both its surface spread and the depth of structural damage, resulting in poorer tissue regeneration.

Multimodal label-free imaging of living dermal equivalents including dermal papilla cells

BackgroundDespite the significant progress in the development of skin equivalents (SEs), the problem of noninvasively assessing the quality of the cell components and the collagen structure of living SEs both before and after transplantation remains. Undoubted preference is given to in vivo methods of noninvasive, label-free monitoring of the state of the SEs. Optical bioimaging methods, such as cross-polarization optical coherence tomography (CP OCT), multiphoton tomography (MPT), and fluorescence lifetime imaging microscopy (FLIM), present particular advantages for the visualization of such SEs.MethodsIn this study, we simultaneously applied several visualization techniques for skin model examination. We investigated the structure and quality of dermal equivalents containing dermal papilla (DP) cells and dermal fibroblasts (FBs) using CP OCT, MPT, and FLIM. Both the energy metabolism of the cell components and the structuring of the collagen fibrils were addressed.ResultsBased on the data from the fluorescence lifetimes and the contributions of protein-bound NAD(P)H, a bias toward oxidative metabolism was indicated, for the first time, in both the DP cells and FBs on day 14 of SE cultivation. The CP OCT and MPT data also indicated that both DP cells and FBs structured the collagen gel in a similar manner.ConclusionIn this study, multimodal label-free imaging of the structure and quality of living dermal equivalents was implemented for the first time with the use CP OCT, MPT, and FLIM of NAD(P)H. Our data suggest that the combination of different imaging techniques provides an integrated approach to data acquisition regarding the structure and quality of dermal equivalents, minimizes the potential disadvantages of using a single method, and provides an ideal information profile for clinical and research applications.

Fabrication and Handling of 3D Scaffolds Based on Polymers and Decellularized Tissues

Polymeric, ceramic and hybrid material-based three-dimensional (3D) scaffold or matrix structures are important for successful tissue engineering. While the number of approaches utilizing the use of cell-based scaffold and matrix structures is constantly growing, it is essential to provide a framework of their typical preparation and evaluation for tissue engineering. This chapter describes the fabrication of 3D scaffolds using two-photon polymerization, decellularization and cell encapsulation methods and easy-to-use protocols allowing assessing the cell morphology, cytotoxicity and viability in these scaffolds.

Study of the involvement of allogeneic MSCs in bone formation using the model of transgenic mice.

ABSTRACT Mesenchymal stem cells (MSCs) are thought to be the most attractive type of cells for bone repair. However, much still remains unknown about MSCs and needs to be clarified before this treatment can be widely applied in the clinical practice. The purpose of this study was to establish the involvement of allogeneic MSCs in the bone formation in vivo, using a model of transgenic mice and genetically labeled cells. Polylactide scaffolds with hydroxyapatite obtained by surface selective laser sintering were used. The scaffolds were sterilized and individually seeded with MSCs from the bone marrow of 5-week-old GFP(+) transgenic C57/Bl6 or GFP(−)C57/Bl6 mice. 4-mm-diameter critical-size defects were created on the calvarial bone of mice using a dental bur. Immediately after the generation of the cranial bone defects, the scaffolds with or without seeded cells were implanted into the injury sites. The cranial bones were harvested at either 6 or 12 weeks after the implantation. GFP(+) transgenic mice having scaffolds with unlabeled MSCs were used for the observation of the host cell migration into the scaffold. GFP(−) mice having scaffolds with GFP(+)MSCs were used to assess the functioning of the seeded MSCs. The obtained data demonstrated that allogeneic MSCs were found on the scaffolds 6 and 12 weeks post-implantation. By week 12, a newly formed bone tissue from the seeded cells was observed, without an osteogenic pre-differentiation. The host cells did not appear, and the control scaffolds without seeded cells remained empty. Besides, a possibility of vessel formation from seeded MSCs was shown, without a preliminary cell cultivation under controlled conditions.

Two-Photon Polymerization in Tissue Engineering

In tissue engineering, three-dimensional scaffolds, which should ensure necessary mechanical and biological microenvironment and nutrient, oxygen and grow factor delivery to proliferating cells, are an essential element. They can be formed from polymeric, ceramic and hybrid materials via different techniques. Modern laser fabrication methods, which provide high accuracy of positioning and energy focusing and allow the precise porous scaffold formation, are particularly interesting. Two-photon polymerization is one of the most promising laser-based techniques and permits the use of a large material variety for scaffold fabrication with the possibility of controlling accurately their microarchitecture. While the number of studies on two-photon polymerization is constantly growing, it is crucial to provide a framework of its application in tissue engineering. Therefore, this chapter aims to describe recent achievements and examples of two-photon polymerization application in tissue engineering and to reveal the main trends in this field.

In vivo multiphoton and fluorescence lifetime imaging microscopy of the healthy and cholestatic liver

A cholestatic liver disease presents one of the most common liver diseases and can potentially progress to cirrhosis or even cholangiocarcinoma. Conventional techniques are insufficient to precisely describe the complex internal structure, heterogeneous cell populations and the dynamics of biological processes of the liver. Currently, the methods of multiphoton and fluorescence lifetime imaging microscopy are actively introducing to biomedical research. Those methods are extremely informative and non-destructive that allows studying of a large number of processes occurring inside cells and tissues, analyzing molecular cellular composition, as well as evaluating the state of connective tissue fibers due to their ability to generate a second optical harmonic. Multiphoton and FLIM microscopy do not need additional staining of samples or the incorporation of any markers to study metabolism, lipid composition, microstructure analysis, evaluation of fibrous structures. These parameters have pronounced changes in hepatocytes of liver with common pathological diseases. Thereby in this study we investigated metabolic changes in the healthy and cholestatic liver based on the fluorescence of the metabolic co-factors NAD(P)H and FAD by multiphoton microscopy combined with FLIM. To estimate the contribution of energy metabolism and lipogenesis in the observed changes of the metabolic profile, a separate analysis of NADH and NADPH was presented. The data can be used to develop new criteria for the identification of hepatic pathology at the level of hepatocyte changes directed to personalized medicine in the future.