David A. Feary

Holocene carbonate sedimentation on the west Eucla Shelf, Great Australian Bight: a shaved shelf

The southern continental margin of Australia is a cool-water carbonate sedimentary province located in a high-energy, swell-dominated oceanographic setting. A vibrocore transect of 14C-dated sediments across the centre of the Eucla Shelf is the first record of Holocene shelf deposition in the Great Australian Bight. Much of the seafloor shallower than 70 m water depth, the base of wave abrasion, is bare Cenozoic limestone, in some places encrusted by (?) Late Pleistocene, coral-rich, limestone that is cemented by high-magnesium calcite (12 mole% MgCO3). The areally extensive, 100 km-wide, hard, bored substrate supports an epibiota of coralline algae, minor bryozoans and soft algae or is covered by patches of Holocene sediment up to 1.5 m thick; generally a basal bivalve lag (< 3 ka) overlain by quartzose-bioclastic palimpsest sand. This pattern of active carbonate production but little accretion on the wave-swept mid- to inner-shelf is similar to that on other parts of the southern Australian continental margin. The term shaved shelf is proposed for this style of carbonate platform, formed by alternating periods of sediment accretion, cementation and erosion. The palimpsest sand is typically rich in bivalves, coralline algae and locally, detrital dolomite. Outer shelf Holocene sediment, below the base of wave abrasion but inboard of the shelf edge, is a metre-thick unit of fine, microbioclastic muddy sand with minor delicate bryozoans overlying a 9–13 ka rhodolith gravel. Some of this outer shelf sediment appears to have been resedimented. The shelf edge is a sandy and rocky seafloor with active bryozoan growth and sediment production. The Holocene sediments are enriched in coralline algal particles and conspicuous large foraminifers (cf. Marginopora) and depleted in bryozoans, as compared to coeval deposits on the Lacepede and Otway shelves off southeastern Australia. These differences are interpreted to reflect warmer waters of the Leeuwin Current and prevalent downwelling in this area as opposed to the general upwelling and colder waters in the east.

Quaternary bryozoan reef mounds in cool-water, upper slope environments: Great Australian Bight

Bryozoan reef mounds are common features in the geological record, occurring within mid-ramp, slope paleoenvironments, especially in Paleozoic carbonate successions, but until now have not been recorded from the modern ocean. Recent scientific drilling in the Great Australian Bight (Ocean Drilling Program Leg 182) has confirmed the existence of shallow subsurface bryozoan reef mounds in modern water depths of 200–350 m. These structures have as much as 65 m of synoptic relief, and occur both as single mounds and as mound complexes. They are unlithified, have a floatstone texture, and are rich in delicate branching, encrusting and/or nodular-arborescent, flat-robust branching, fenestrate, and articulated zooidal bryozoan growth forms. The muddy matrix is composed of foraminifers, serpulids, fecal pellets, irregular bioclasts, sponge spicules, and calcareous nannofossils. The 14C accelerator mass spectrometry dates of 26.6–35.1 ka indicate that the most recent mounds, the tops of which are 7–10 m below the modern seafloor, flourished during the last glacial lowstand but perished during transgressive sea-level rise. This history reflects changing oceanographic current patterns; strong upwelling during lowstands, and reduced upwelling and lowered trophic resources during highstands. Large specimens of benthic foraminifers restricted to the mounds confirm overall mesotrophic growth conditions. The mounds are similar in geometry, scale, general composition, and paleoenvironments to older structures, but lack obvious microbial influence and extensive synsedimentary cementation. Such differences reflect either short-term local conditions or long-term temporal changes in ocean chemistry and biology.

Hydrogen sulfide–hydrates and saline fluids in the continental margin of South Australia

During the drilling of the southern Australian continental margin (Leg 182 of the Ocean Drilling Program), fluids with unusually high salinities (to 106‰) were encountered in Miocene to Pleistocene sediments. At three sites (1127, 1129, and 1131), high contents of H2S (to 15%), CH4 (50%), and CO2 (70%) were also encountered. These levels of H2S are the highest yet reported during the history of either the Deep Sea Drilling Project or the Ocean Drilling Program. The high concentrations of H2S and CH4 are associated with anomalous Na+/Cl− ratios in the pore waters. Although hydrates were not recovered, and despite the shallow water depth of these sites (200–400 m) and relative warm bottom water temperatures (11–14 °C), we believe that these sites possess disseminated H2S-dominated hydrates. This contention is supported by calculations using the measured gas concentrations and temperatures of the cores, and depths of recovery. High concentrations of H2S necessary for the formation of hydrates under these conditions were provided by the abundant SO42− caused by the high salinities of the pore fluids, and the high concentrations of organic material. One hypothesis for the origin of these fluids is that they were formed on the adjacent continental shelf during previous lowstands of sea level and were forced into the sediments under the influence of hydrostatic head.

Cenozoic biogenic mounds and buried Miocene(?) barrier reef on a predominantly cool-water carbonate continental margin—Eucla basin, western Great Australian Bight

The southern continental margin of Australia is the largest area of cool-water carbonate shelf deposition on the globe. Interpretation of 5495 km of airgun seismic-reflection data in the western part of the Great Australian Bight indicates that the 700-m-thick Cenozoic section of the offshore Eucla basin was deposited largely as a prograding cool-water, middle- to high-latitude carbonate ramp, characterized by widespread development of broad, low-relief, biogenic (bryozoan[?]-sponge), shelf and upper-slope mounds. The succession also contains a spectacular and extensive (>475 km long) buried middle Miocene barrier reef (the Miocene Little Barrier Reef) parallel to the modern shelf edge. This rimmed carbonate platform margin represents an episode of warm-water sedimentation during a global climatic optimum, probably coupled with strong eastward flow of a proto-Leeuwin Current. The late Miocene eustatic sea-level fall produced an areally restricted debris-apron sequence at the foot of the reef escarpment. The carbonate platform is capped by a Neogene cool-water carbonate ramp succession typified by aggradational to sigmoidal sequences, punctuated by periods of cold(?)-water, sea-floor erosion. Interpretation of this succession in the light of global and local tectonic and oceanographic events illustrates the dominant influence of water temperature on carbonate platform and reef growth throughout the Cenozoic.

Origin of Late Pleistocene Bryozoan Reef Mounds; Great Australian Bight

Bryozoan-rich biogenic mounds grew periodically on the prograding carbonate slope of the central Great Australian Bight throughout Pliocene-Pleistocene time. Cores from three ODP Leg 182 drill sites provide a record of mound growth during the last 300,000 years over a stratigraphic thickness of similar to 150 m. These mounds, the first such structures described from the modern ocean, grew between paleodepths of 100 and 240 m; we infer that the upper limit of growth was established by swell wave base, and the lower boundary was fixed by an oligotrophic water mass. Detailed chronostratigraphy, based on radiometric and U-series dating, benthic foraminifer stable-isotope stratigraphy, and planktonic foraminifer abundance ratios, confirms that buildups flourished during glacial lowstands (even-numbered marine isotope stages) but were largely moribund during interglacial highstands and are not extant today. Mound floatstones are compositionally a mixture of in situ bryozoans comprising 96 genera and characterized by fenestrate, flat robust branching, encrusting, nodular-arborescent, and delicate branching growth forms. The packstone matrix comprises autochthonous and allochthonous sand-size bryozoans, benthic and planktonic foraminifers, serpulids, coralline algae, sponge spicules, peloids, and variable glauconite and quartz grains, together with mud-size ostracods, tunicate spicules, bioeroded sponge chips, and coccoliths. Intermound, allochthonous packstone and local grainstone contain similar particles, but they are conspicuously worn, abraded, blackened, and bioeroded. An integrated model of mound accretion during sea-level lowstands begins with delicate branching bryozoan floatstone that increases in bryozoan abundance and diversity upward over a thickness of 5-10 m, culminating in thin intervals of grainstone characterized by reduced diversity and locally abraded fossils. Mound accumulation was relatively rapid (30-67 cm/ky) and locally punctuated by rudstones and firmgrounds. Intermound highstand deposition was comparatively slow (17-25 cm/ky) and typified by meter-scale, fining-upward packages of packstone and grainstone or burrowed packstone, with local firmgrounds overlain by characteristically abraded particles. Mound growth during glacial periods is interpreted to have resulted from increased nutrient supply and enhanced primary productivity. Such elevated trophic resources were both regional and local, and thought to be focused in this area by cessation of Leeuwin Current flow, together with northward movement of the subtropical convergence and related dynamic mixing.

Co‐generation of hydrogen sulfide and methane in marine carbonate sediments

Sulfate reduction and methanogenesis are considered to be mutually exclusive microbial reactions in marine sediments. Typically, methane does not appear in significant concentrations in sediment pore waters until almost all dissolved sulfate has been reduced to sulfide. An exception to this commonly accepted pattern occurs in an approximately 500-meter thick sequence of Quaternary carbonates on the continental margin of the Great Australian Bight. An unusual combination of geochemical and sedimentological conditions leads to extensive simultaneous sulfate reduction and methane production throughout the 500-m interval. A probable explanation for the co-production of these reduced gases in this deeper biosphere is the presence of noncompetitive substrates for the two types of microbiota.