David A. Michels

Fully Automated Two-dimensional Capillary Electrophoresis for High Sensitivity Protein Analysis

We report a system for automated protein analysis. In the system, proteins are labeled with the fluorogenic reagent 3-(2-furoyl)quinoline-2-carboxaldehyde, which reacts with lysine residues and creates a highly fluorescent product. These labeled proteins are analyzed by submicellar capillary electrophoresis at pH 7.5 to perform a first dimension separation. Once the first components migrate from the capillary, a fraction is transferred to a second dimension capillary, where electrophoresis is performed at pH 11.1 to further separate the proteins. Laser-induced fluorescence is used as an ultrasensitive detector of the separated proteins. Successive fractions are transferred from the first dimension capillary to the second dimension capillary for further separation to generate, in serial fashion, a two-dimensional electropherogram. The transfer of fractions is computer-controlled; there is no operator intervention once the sample has been injected. Zeptomoles of labeled proteins are detected, providing exquisite sensitivity.

Identification of codon-specific serine to asparagine mistranslation in recombinant monoclonal antibodies by high-resolution mass spectrometry.

Translation errors in protein biosynthesis may result in low level amino acid misincorporation and contribute to product heterogeneity of recombinant protein therapeutics. We report the use of peptide map analysis by reversed-phase high-performance liquid chromatography and high-resolution mass spectrometry to detect and identify mistranslation events in recombinant monoclonal antibodies expressed in mammalian cell lines including Chinese hamster ovary (CHO) cells. Misincorporation of an asparagine residue at multiple serine positions was detected as earlier-eluting peptides with masses 27.01 Da higher than expected. The exact positions at which misincorporation occurred were identified by tandem mass spectrometry of the asparagine-containing variant peptides. The identified asparagine misincorporation sites correlated with the use of codon AGC but with none of the other five serine codons. The relative levels of misincorporation ranged from 0.01%-0.2% among multiple serine positions detected across three different antibodies by targeted analysis of expected and variant peptides. The low levels of misincorporation are consistent with published predictions for in vivo translation error rates. Our results demonstrate that state-of-the-art mass spectrometry with a combination of high sensitivity, accuracy, and dynamic range provides a new ability to discover and characterize low level protein variants that arise from mistranslation events.

Charge heterogeneity of monoclonal antibodies by multiplexed imaged capillary isoelectric focusing immunoassay with chemiluminescence detection.

Characterization of charge heterogeneity of recombinant monoclonal antibodies (mAbs) requires high throughput analytical methods to support clone selection and formulation screens. We applied the NanoPro technology to rapidly measure relative charge distribution of mAbs in early stage process development. The NanoPro is a multiplexed capillary-based isoelectric immunoassay with whole-column imaging detection. This assay offers specificity, speed and sensitivity advantages over conventional capillary isoelectric focusing (CIEF) platforms. After CIEF, charge variants are photochemically immobilized to the wall of a short coated capillary. Once immobilized, mAbs are probed using a secondary anti-IgG conjugated with horseradish peroxidase. After flushing away excess reagents, secondary antibodies bound to their targets are then detected by chemiluminescence upon incubation with peroxidase reactive substrates. Charge heterogeneity as determined by chemiluminescence was similar to that measured by conventional CIEF technology with absorbance detection for purified mAbs and contaminated mAbs derived directly from host cellular extract. Upon method optimization, the automated CIEF immunoassay was applied to several mAbs of varying isoelectric points, demonstrating the suitability of NanoPro as a rugged high-throughput product characterization tool. Furthermore, qualification of detection sensitivity, precision, and dynamic range are reported with discussion of its advantages as an alternative approach to rapidly characterize charge variants during process development of mAbs.

Sheath-flow cuvette for high-sensitivity laser-induced fluorescence detection in capillary electrophoresis.

The sheath-flow cuvette is a key component in a high-sensitivity post-column laser-induced fluorescence detector for capillary electrophoresis. Most designs are based on commercial cuvettes originally manufactured for use in a flow cytometer. In these devices, a quartz flow chamber is held in a stainless-steel fixture that is difficult to machine and subjects the cuvette to a torque when sealed, which frequently leads to damage of the flow chamber. In this report we present a design for a cuvette that may easily be constructed. This design uses compression to hold and seal the quartz flow chamber without applying torque. The system produces detection limits (3σ) of 115 yoctomoles (70 copies) for FQ-labeled carbonic anhydrase.

Absolute Quantitation of Intact Recombinant Antibody Product Variants Using Mass Spectrometry

Accurate and precise quantitative measurement of product-related variants of a therapeutic antibody is essential for product development and testing. Bispecific antibodies (bsAbs) are Abs composed of two different half antibody arms, each of which recognizes a distinct target, and recently they have attracted substantial therapeutic interest. Because of the increased complexity of its structure and its production process, as compared to a conventional monoclonal antibody, additional product-related variants, including covalent and noncovalent homodimers of half antibodies (hAbs), may be present in the bsAb product. Sufficient separation and reliable quantitation of these bsAb homodimers using liquid chromatography (LC) or capillary electrophoresis-based methods is challenging because these homodimer species and the bsAb often have similar physicochemical properties. Formation of noncovalent homodimers and heterodimers can also occur. In addition, since homodimers share common sequences with their corresponding halves and bsAb, it is not suitable to use peptides as surrogates for their quantitation. To tackle these analytical challenges, we developed a mass spectrometry-based quantitation method. Chip-based nanoflow LC-time-of-flight mass spectrometry coupled with a standard addition approach provided unbiased absolute quantitation of these drug-product-related variants. Two methods for the addition of known levels of standard (multi- or single-addition) were evaluated. Both methods demonstrated accurate and reproducible quantitation of homodimers at the 0.2% (w/w) level, with the single-addition method having the promise of higher analytical throughput.

A 2D LC-MS/MS Strategy for Reliable Detection of 10-ppm Level Residual Host Cell Proteins in Therapeutic Antibodies

Methodologies employing LC-MS/MS have been increasingly used for characterization and identification of residual host cell proteins (HCPs) in biopharmaceutical products to ensure their consistent product quality and safety for patients. To improve the sensitivity and reliability for HCP detection, we developed a high pH-low pH two-dimensional reversed phase LC-MS/MS approach in conjunction with offline fraction concatenation. Proof-of -concept was established using a model in which seven proteins spanning a size range of 29-78 kDa are spiked into a purified antibody product to simulate the presence of low-level HCPs. By incorporating a tandem column configuration and a shallow gradient through the second-dimension, all seven proteins were consistently identified at 10 ppm with 100% success rate following LC-MS/MS analysis of six concatenated fractions across multiple analysts, column lots and injection loads. Using the more complex Universal Proteomic Standard 1 (UPS-1) as an HCP model, positive identification was consistently achieved for 19 of the 22 proteins in 8-12 ppm range (10 ppm ±20%). For the first time, we demonstrate an effective LC-MS/MS strategy that not only has high sensitivity but also high reliability for HCP detection. The method performance has high impact on pharmaceutical company practices in using advanced LC-MS/MS technology to ensure product quality and patient safety.