David Baratoux

Reconstructing the total shortening history of the NW Himalaya

The onset of India-Asia contact can be dated with both biostratigraphic analysis of syn-collisional sedimentary successions deposited on each side of the Indus Suture zone, and by radiometric dating of Indian crustal rocks which have undergone subduction to great depths in the earliest subduction-collision stages. These data, together with paleomagnetic data show that the initial contact of the Indian and Asian continental margins occurred at the Paleocene/Eocene boundary, corresponding to 55 ± 2 Ma. Such dating, which is consistent with all available geological evidence, including the record of magnetic anomalies in the Indian ocean and decrease of magmatic activity related to oceanic subduction can thus be considered as accurate and robust. The sedimentary record of the Tethys Himalaya rules out obduction of oceanic allochtons directly onto the Indian continental margin during the Late Cretaceous. The commonly inferred Late Cretaceous ophiolite obduction events may have thus occurred in intra-oceanic setting close to the Asian margin before its final emplacement onto the India margin during the Eocene. Granitoid and sedimentary rocks of the Indian crust, deformed during Permo-Carboniferous rifting, reached a depth of some 100 km about 1 Myr after the final closure of the Neo-Tethys, and began to be exhumed between 50 and 45 Ma. At this stage, the foreland basin sediments from Pakistan to India show significant supply from volcanic arcs and ophiolites of the Indus Suture Zone, indicating the absence of significant relief along the proto-Himalayan belt. Inversion of motion may have occurred within only 5 to 10 Myr after the collision onset, as soon as thicker and buoyant Indian crust chocked the subduction zone. The arrival of thick Indian crust within the convergent zone 50-45 Myr ago led to progressive stabilization of the India/Asia convergent rate and rapid stabilization of the Himalayan shortening rate of about 2 cm.yr-1. This first period also corresponds to the onset of terrestrial detrital sedimentation within the Indus Suture zone and to the Barrovian metamorphism on the Indian side of the collision zone. Equilibrium of the Himalayan thrust belt in terms of amount of shortening vs amount of erosion and thermal stabilization less than 10 Myr after the initial India/Asia contact is defined as the collisional regime. In contrast, the first 5 to 10 Myr corresponds to the transition from oceanic subduction to continental collision, characterized by a marked decrease of the shortening rate, onset of aerial topography, and progressive heating of the convergent zone. This period is defined as the continental subduction phase, accommodating more than 30% of the total Himalayan shortening.

Orientation and distribution of recent gullies in the southern hemisphere of Mars: Observations from High Resolution Stereo Camera/Mars Express (HRSC/MEX) and Mars Orbiter Camera/Mars Global Surveyor (MOC/MGS) data

Geologically recent small gullies on Mars display morphologies consistent with erosion by water or by debris flows. Suggested formation models are divided into two main categories: (1) groundwater or (2) melting of near-surface ice/snow sourced from the atmosphere. We have measured location and orientation and recorded the local contexts of gullies to constrain the likely models of gully formation. More than 22,000 Mars Orbiter Camera Narrow Angle (MOC NA) and >120 Mars Express High Resolution Stereo Camera (HRSC) images in the southern hemisphere were searched for gullies. Discrete gullied slope sections with consistent orientation were recorded rather than individual gullies. Slope setting (impact crater, valley wall, etc.), location, and orientation were recorded for each slope section. More than 750 MOC images with gullies (>900 distinct gullied slope sections) and more than 40 HRSC images (>380 distinct gullied slope sections) were identified. From both MOC and HRSC, gullies were found to be most common between 30 and 50 degrees latitude and to have an overall pole facing preference. The preferred gully orientation for HRSC is southeast rather than south in MOC, owing to illumination effects that make gullies difficult to detect on south- to southwest-facing slopes in HRSC. In both MOC and HRSC surveys, higher-latitude gullies show less preference for pole facing than those at mid latitudes. Both data sets produced similar results, demonstrating that our data are reliable. We suggest that the observed latitudinal and orientation distributions of gullies show that insolation and atmospheric conditions play a key role in gully formation.

Thermal history of Mars inferred from orbital geochemistry of volcanic provinces

Reconstruction of the geological history of Mars has been the focus of considerable attention over the past four decades, with important discoveries being made about variations in surface conditions. However, despite a significant increase in the amount of data related to the morphology, mineralogy and chemistry of the martian surface, there is no clear global picture of how magmatism has evolved over time and how these changes relate to the internal workings and thermal evolution of the planet. Here we present geochemical data derived from the Gamma Ray Spectrometer on board NASA’s Mars Odyssey spacecraft, focusing on twelve major volcanic provinces of variable age. Our analysis reveals clear trends in composition that are found to be consistent with varying degrees of melting of the martian mantle. There is evidence for thickening of the lithosphere (17–25 km Gyr−1) associated with a decrease in mantle potential temperature over time (30–40 K Gyr−1). Our inferred thermal history of Mars, unlike that of the Earth, is consistent with simple models of mantle convection.

Recent rapid thinning of the ''Mer de Glace'' glacier derived from satellite optical images

The rapid wastage of mountain glaciers and their contribution to sea level rise require worldwide monitoring of their mass balance. In this paper, we show that changes in glacier thickness can be accurately measured from satellite images. We use SPOT image pairs to build Digital Elevation Models (DEMs) of the Mont Blanc area (French Alps) for different years. To register the DEMs, we adjust their longitude, latitude and altitude over motionless areas. The uncertainty of the thickness change measurement is greatly reduced by averaging over areas covering altitude intervals of 50 m. Comparisons with topographic profiles and a differential DEM from aerial photographs obtained on the Mer de Glace indicate an overall accuracy of 1 m for the thickness change measurement. Below 2100 m, satellite DEMs show an evolution of the thinning rate from 1±0.4 m/a (years 1979–1994) to 4.1±1.7 m/a (2000–2003).

Igneous mineralogy at Bradbury Rise: The first ChemCam campaign at Gale crater

Textural and compositional analyses using Chemistry Camera (ChemCam) remote microimager and laser-induced breakdown spectroscopy (LIBS) have been performed on five float rocks and coarse gravels along the first 100 m of the Curiosity traverse at Bradbury Rise. ChemCam, the first LIBS instrument sent to another planet, offers the opportunity to assess mineralogic diversity at grain-size scales (~ 100 µm) and, from this, lithologic diversity. Depth profiling indicates that targets are relatively free of surface coatings. One type of igneous rock is volcanic and includes both aphanitic (Coronation) and porphyritic (Mara) samples. The porphyritic sample shows dark grains that are likely pyroxene megacrysts in a fine-grained mesostasis containing andesine needles. Both types have magnesium-poor basaltic compositions and in this respect are similar to the evolved Jake Matijevic rock analyzed further along the Curiosity traverse both with Alpha-Particle X-ray Spectrometer and ChemCam instruments. The second rock type encountered is a coarse-grained intrusive rock (Thor Lake) showing equigranular texture with millimeter size crystals of feldspars and Fe-Ti oxides. Such a rock is not unique at Gale as the surrounding coarse gravels (such as Beaulieu) and the conglomerate Link are dominated by feldspathic (andesine-bytownite) clasts. Finally, alkali feldspar compositions associated with a silica polymorph have been analyzed in fractured filling material of Preble rock and in Stark, a putative pumice or an impact melt. These observations document magmatic diversity at Gale and describe the first fragments of feldspar-rich lithologies (possibly an anorthosite) that may be ancient crust transported from the crater rim and now forming float rocks, coarse gravel, or conglomerate clasts.

Sinuous gullies on Mars: Frequency, distribution, and implications for flow properties

Recent gullies on Mars are suspected to be the result of liquid‐water‐bearing flows. A formation from wet flows has been challenged by studies invoking granular (dry) flows. Our study focuses on the sinuous shapes observed for some of the recent Martian gullies. Sinuous gullies are found in locations and slopes (of 10°-15°) similar to straight gullies, and they are therefore related to the same formation processes. Numerical simulations of granular flows are performed here by introducing topographic variations such as obstacles, roughness, or slope changes that could possibly generate flow sinuosity. None of these simulations was able to reproduce sinuous shapes on a slope lower than 18° with friction angles typical of dry granular material. The only way to simulate sinuous shapes is to create small‐amplitude periodic variations of the topography of the deposit, an origin not supported by current Martian imagery. Given the presence of sinuosity in natural terrestrial debris flows, we have concluded that sinuous Martian gullies are better reproduced by liquid‐water‐bearing debris flows. Sinuous shapes in leveed flows are used to derive mechanical parameters from several Martian gullies using photoclinometry. Values in yield strength of 100-2200 Pa, velocities of 1.1-3.3 m s−1, and viscosities from 40 to 1040 Pa s are found, which are all within the range of values for terrestrial debris flows with various proportions of liquid water (20%-40%).

Petrological constraints on the density of the Martian crust

New insights into the chemistry of the Martian crust have been made available since the derivation of crustal thickness maps from Mars Global Surveyor gravity and topography data that used a conservative range of density values (2700–3100 kg/m3). A new range of crustal density values is calculated from the major element chemistry of Martian meteorites (3100–3700 kg/m3), igneous rocks at Gusev crater (3100–3600 kg/m3) and from the surface concentration of Fe, Al, Ca, Si, and K measured by the Gamma-Ray Spectrometer on board Mars Odyssey (3250–3450 kg/m3). In addition, the density of mineral assemblages resulting from low-pressure crystallization of primary melts of the primitive mantle are estimated for plausible conditions of partial melting corresponding to the Noachian to Amazonian periods (3100–3300 kg/m3). Despite the differences between these approaches, the results are all consistent with an average density above 3100 kg/m3 for those materials that are close to the surface. The density may be compatible with the measured mass of Mars and the moment of inertia factor, but only if the average crustal thickness is thicker than previously thought (approaching 100 km). A thicker crust implies that crustal delamination and recycling could be possible and may even control its thickness, globally or locally. Alternatively, and considering that geoid-to-topography ratios argue against such a thick crust for the highlands, our results suggest the existence of a buried felsic or anorthositic component in the southern hemisphere of Mars.

Instrumental methods for professional and amateur collaborations in planetary astronomy

Amateur contributions to professional publications have increased exponentially over the last decades in the field of planetary astronomy. Here we review the different domains of the field in which collaborations between professional and amateur astronomers are effective and regularly lead to scientific publications.We discuss the instruments, detectors, software and methodologies typically used by amateur astronomers to collect the scientific data in the different domains of interest. Amateur contributions to the monitoring of planets and interplanetary matter, characterization of asteroids and comets, as well as the determination of the physical properties of Kuiper Belt Objects and exoplanets are discussed.

A swarm of small shield volcanoes on Syria Planum, Mars

This study focuses on the volcanism in Syria Planum, located at the center of the Tharsis bulge at an altitude of 6 to 8 km above Mars datum. Syria Planum was previously recognized as a center for the tectonic activity of Tharsis, but not as a major locus for volcanic activity, despite its centrality over the bulge. Using high-resolution images from the high resolution stereo camera on Mars Express combined with Mars Observer Laser Altimeter data, we have characterized a volcanic system that reveals a number of very interesting aspects of Mars volcanism. We identified a swarm of tens of coalesced shallow volcanic edifices, typically 10–30 km diameter, 0.1–0.2 km high, and with slopes around 0.5°. These characteristics are similar to those of small shield volcanoes found in Iceland. In addition, an intermediate-sized volcano, which is the source of lava flows that extend over >200 km, is observed west of this shield swarm. Our study characterizes a previously unrecognized volcanic assemblage on Mars which appears to be much more developed than was documented before, in terms of morphology, inferred origin, and periodicity of eruption. The estimated lava flux of the Syria Planum volcanoes is of the same order as the lava flux of Tharsis Montes. These characteristics suggest that Syria Planum experienced a very specific style of volcanism, which we dated to the Hesperian period.

Late Tharsis formation and implications for early Mars

The Tharsis region is the largest volcanic complex on Mars and in the Solar System. Young lava flows cover its surface (from the Amazonian period, less than 3 billion years ago) but its growth started during the Noachian era (more than 3.7 billion years ago). Its position has induced a reorientation of the planet with respect to its spin axis (true polar wander, TPW), which is responsible for the present equatorial position of the volcanic province. It has been suggested that the Tharsis load on the lithosphere influenced the orientation of the Noachian/Early Hesperian (more than 3.5 billion years ago) valley networks and therefore that most of the topography of Tharsis was completed before fluvial incision. Here we calculate the rotational figure of Mars (that is, its equilibrium shape) and its surface topography before Tharsis formed, when the spin axis of the planet was controlled by the difference in elevation between the northern and southern hemispheres (hemispheric dichotomy). We show that the observed directions of valley networks are also consistent with topographic gradients in this configuration and thus do not require the presence of the Tharsis load. Furthermore, the distribution of the valleys along a small circle tilted with respect to the equator is found to correspond to a southern-hemisphere latitudinal band in the pre-TPW geographical frame. Preferential accumulation of ice or water in a south tropical band is predicted by climate model simulations of early Mars applied to the pre-TPW topography. A late growth of Tharsis, contemporaneous with valley incision, has several implications for the early geological history of Mars, including the existence of glacial environments near the locations of the pre-TPW poles of rotation, and a possible link between volcanic outgassing from Tharsis and the stability of liquid water at the surface of Mars.