David C. Cullen

Covalent coupling of immunoglobulin G to self-assembled monolayers as a method for immobilizing the interfacial-recognition layer of a surface plasmon resonance immunosensor

Protocols have been developed for the random and site-directed covalent coupling of immunoglobulin G [anti-hIgG] [IgG] to silver surfaces modified with a self-assembled monolayer [SAM] of thioctic acid, mercaptopropionic acid [MPA], L-cysteine or 4-aminothiophenol [PATP]. A surface plasmon resonance [SPR] immunosensor fabricated with a more ordered and hydrophilic IgG-SAM-silver interfacial layer, demonstrates an increased ability for performing sensitive and selective assay of human immunoglobulin G [hIgG] compared with a device fabricated with a physically-adsorbed IgG-silver interfacial-layer due to reduced levels of non-specific binding. Detection limits [DL] for hIgG from serum down to 6 micrograms/ml (40 nM) and assay sensitivities up to 0.24 ng hIgG/mm2/nM are reported.

Monitoring and classification of PAH toxicity using an immobilized bioluminescent bacteria

An immobilized recombinant bioluminescent Escherichia coli strain, harboring a lac::luxCDABE fused plasmid, which shows lower bioluminescence levels when cellular metabolism is inhibited, was used to monitor the cellular toxicity of polycyclic aromatic hydrocarbons (PAHs). PAHs, classified as pericondensed (PCPAHs) or catacondensed (CCPAHs) according to their molecular structures, were differentiable according to the response of this biosensor. Only CCPAHs were found to cause cellular toxicity, resulting in a dose-dependent decrease in the bioluminescent output. The induction of cellular toxicity by CCPAHs and PCPAHs was compared with acute toxicity predictions obtained using the quantitative structure-activity relationship (QSAR) model. A good relationship was obtained between the toxicities determined with the bioluminescent response of the immobilized bacterium GC2 and the QSAR model. It was also found that the present study offers a new method of predicting the cellular toxicities of CCPAHs or PCPAHs using this biosensor.

Development of a common biosensor format for an enzyme based biosensor array to monitor fruit quality.

Individual enzyme-based biosensors involving three-electrode systems were developed for the detection of analytes comprising markers of the stage of maturity and quality in selected fruits of economic importance to tropical countries. Importantly, a common fabrication format has been developed to simplify manufacture and allow future integration of the individual sensors into a single multi-sensor array. Specifically, sensors for beta-D-glucose, total D-glucose, sucrose and ascorbic acid have been developed. Pectin, a natural polysaccharide present in plant cells, was used as a novel matrix to enhance enzyme entrapment and stabilisation in the sensors. Except for ascorbic acid, all the sensors function via the detection of enzymatically generated H2O2 at rhodinised carbon electrodes. Since ascorbic acid is electrochemically active at the working potential chosen (+350 mV vs. Ag/AgCl), it was measured directly. Enzyme sensors demonstrated expected response with respect to their substrates, typically 0-0.8 microA/20 mm2 electrode area response over analyte ranges of 0-7 mM. Interferences related to electrochemically active compounds present in fruits under study were significantly reduced by inclusion of a suitable cellulose acetate (CA) membrane or by enzymatic inactivation with ascorbate oxidase. Initial development was carried out into production of biosensor arrays. CA membranes were used to improve the linear range of the sensors, producing up to a fivefold improvement in the detection range compared to sensors without an additional diffusion barrier.

Using the surface spontaneous depolarization field of ferroelectrics to direct the assembly of virus particles

Tobacco mosaic virus (TMV) particles have been assembled at predetermined locations on the surface of a ferroelectric thin film with the composition PbZr0.3Ti0.7O3. The domain structure, hence the surface depolarization field for the ferroelectric associated with the bending of the ferroelectric band structure, was modified at length scales of around 2μm. A suspension of TMV particles was deposited onto the surface of the ferroelectric over the region where domain modification had been performed. SPM images (intermittent contact) revealed that the virus particles were attracted to regions of the surface that had either been positively modified or were nominally neutral. Regions of modified negative surface charge effectively repelled the virus particles.

Fabrication of molecularly imprinted polymer microarray on a chip by mid-infrared laser pulse initiated polymerisation

The possibility to assess several functional polymeric materials in parallel in a microchip format could find a wide range of applications in sensing, combinatorial and high-throughput screening. However several factors, inherent to the nature of material polymerisation have limited such development. We here report an innovative fabrication approach for the elaboration of polymer microarrays bearing polymer dots typically 300 microm in diameter fabricated in situ on a glass cover slip via CO(2) laser pulse initiated polymerisation, as well as initial results on the identification of a suitable monomer composition for the molecular imprinting of dansyl-L-phenylalanine as a proof-of-concept example. A combination of methacrylic acid and 2-vinylpyridine showed the largest affinity to dansyl-L-phenylalanine which agreed with the existing literature and the results were further confirmed by HPLC. Finally, a sensor chip bearing both non-imprinted as well as imprinted polymers was also prepared in order to prove the suitability of this fabrication approach for the elaboration of MIP based sensors. The assay consisted in a simple dip-and-read step and the sensing system was able to discriminate between the l and d enantiomers of dansylphenylalanine with an imprinting factor of 1.6.

Development of a photosystem II-based optical microfluidic sensor for herbicide detection.

Herbicides are highly toxic for both human and animal health. The increased application of herbicides in agriculture during the last decades has resulted in the contamination of both soil and water. Herbicides, under illumination, can inhibit photosystem II electron transfer. Photosynthetic membranes isolated from higher plants and photosynthetic micro-organisms, immobilized and stabilized, can serve as a biorecognition element for a biosensor. The inhibition of photosystem II causes a reduced photoinduced production of hydrogen peroxide, which can be measured by a chemiluminescence reaction with luminol and the enzyme horseradish peroxidase. In the present work, a compact and portable sensing device that combines the production and detection of hydrogen peroxide in a single flow assay is proposed for herbicide detection.

Detection of hormone mimics in water using a miniturised SPR sensor.

The ubiquitous presence of chemicals, both natural andsynthetic, in the environment with the potential to mimichormones that may in turn interfere with the endocrinesystem in both wildlife and humans has in the last decadebecome a major international concern. Hormone mimics orendocrine disrupting compounds (EDCs) are especiallyprevalent in surface and waste-waters and therefore, thereis a need for an at-source or at-line analytical device forthe monitoring of EDC levels.We have incorporated a miniature integrated surface plasmonresonance (SPR) liquid sensor from Texas Instruments into afield analyser and developed a competition/inhibition assayfor a model estrogenic compound in aqueous samples. Theanalyser has the potential for in situ and semi-continuous analysis of EDCs. A novel regeneration schemeemploying the use of a domestic laundry detergent has beenused to remove immobilised assay components between eachassay cycle. The resultant re-usable sensor has beendemonstrated using estrone-3-glucuronide (E3G) as a modelEDC and an anti-E3G antibody producing a current detectionrange of 10 to 150 ng mL-1.

In-Field Implementation of a Recombinant Factor C Assay for the Detection of Lipopolysaccharide as a Biomarker of Extant Life within Glacial Environments.

The discovery over the past two decades of viable microbial communities within glaciers has promoted interest in the role of glaciers and ice sheets (the cryosphere) as contributors to subglacial erosion, global biodiversity, and in regulating global biogeochemical cycles. In situ or in-field detection and characterisation of microbial communities is becoming recognised as an important approach to improve our understanding of such communities. Within this context we demonstrate, for the first time, the ability to detect Gram-negative bacteria in glacial field-environments (including subglacial environments) via the detection of lipopolysaccharide (LPS); an important component of Gram-negative bacterial cell walls. In-field measurements were performed using the recently commercialised PyroGene® recombinant Factor C (rFC) endotoxin detection system and used in conjunction with a handheld fluorometer to measure the fluorescent endpoint of the assay. Twenty-seven glacial samples were collected from the surface, bed and terminus of a low-biomass Arctic valley glacier (Engabreen, Northern Norway), and were analysed in a field laboratory using the rFC assay. Sixteen of these samples returned positive LPS detection. This work demonstrates that LPS detection via rFC assay is a viable in-field method and is expected to be a useful proxy for microbial cell concentrations in low biomass environments.

Planetary science and exploration in the deep subsurface : results from the MINAR Program, Boulby Mine, UK

The authors would also like to acknowledge the funding provided by the STFC Impact Acceleration Fund. Claire R. Cousins is supported by a Royal Society of Edinburgh Research Fellowship. The development of the ExoMars PanCam, the AUPE2 system and the PanCam data processing pipeline has been supported by funding from the UK Space Agency (lead funding agency) and the European Community’s Seventh Framework Program.

A novel reflectance-based aptasensor using gold nanoparticles for the detection of oxytetracycline.

We present a novel reflectance-based colorimetric aptasensor using gold nanoparticles for the detection of oxytetracycline for the first time. It was found that the reflectance-based measurement at two wavelengths (650 and 520 nm) can generate more stable and sensitive signals than absorbance-based sensors to determine the aggregation of AuNPs, even at high AuNP concentrations. One of the most common antibacterial agents, oxytetracycline (OTC), was detected at concentrations as low as 1 nM in both buffer solution and tap water, which was 25-fold more sensitive, compared to the previous absorbance-based colorimetric aptasensors. This reflectance-based colorimetric aptasensor using gold nanoparticles is considered to be a better platform for portable sensing of small molecules using aptamers.