David C. Powers

Bimetallic Pd(III) complexes in palladium-catalysed carbon-heteroatom bond formation

Nature Chemistry 1, 302–309 (2009); published online: 7 June 2009; corrected after print 24 June 2009 In the version of this article originally published, corrections were needed to some units and values of thermodynamic parameters: (1) page 303, penultimate sentence of column 1 should read: (ΔS‡) =−11.

Bimetallic Palladium Catalysis: Direct Observation of Pd(III)−Pd(III) Intermediates

PhI(OAc)(2) is a common oxidant for Pd-catalyzed C-H bond functionalizations. Mechanistic hypotheses since the 1960s have suggested a Pd(II)/Pd(IV) mechanism. Here we present evidence for the relevance of bimetallic Pd(III) complexes to catalysis. A bimetallic Pd(III) acetate was isolated and can afford product by bimetallic reductive elimination.

A Fluoride-Derived Electrophilic Late-Stage Fluorination Reagent for PET Imaging

A palladium compound facilitates rapid incorporation of radioactive fluoride into prospective tracers for medical imaging. The unnatural isotope fluorine-18 (18F) is used as a positron emitter in molecular imaging. Currently, many potentially useful 18F-labeled probe molecules are inaccessible for imaging because no fluorination chemistry is available to make them. The 110-minute half-life of 18F requires rapid syntheses for which [18F]fluoride is the preferred source of fluorine because of its practical access and suitable isotope enrichment. However, conventional [18F]fluoride chemistry has been limited to nucleophilic fluorination reactions. We report the development of a palladium-based electrophilic fluorination reagent derived from fluoride and its application to the synthesis of aromatic 18F-labeled molecules via late-stage fluorination. Late-stage fluorination enables the synthesis of conventionally unavailable positron emission tomography (PET) tracers for anticipated applications in pharmaceutical development as well as preclinical and clinical PET imaging.

Bimetallic Redox Synergy in Oxidative Palladium Catalysis

Polynuclear transition metal complexes, which are embedded in the active sites of many metalloenzymes, are responsible for effecting a diverse array of oxidation reactions in nature. The range of chemical transformations remains unparalleled in the laboratory. With few noteworthy exceptions, chemists have primarily focused on mononuclear transition metal complexes in developing homogeneous catalysis. Our group is interested in the development of carbon-heteroatom bond-forming reactions, with a particular focus on identifying reactions that can be applied to the synthesis of complex molecules. In this context, we have hypothesized that bimetallic redox chemistry, in which two metals participate synergistically, may lower the activation barriers to redox transformations relevant to catalysis. In this Account, we discuss redox chemistry of binuclear Pd complexes and examine the role of binuclear intermediates in Pd-catalyzed oxidation reactions. Stoichiometric organometallic studies of the oxidation of binuclear Pd(II) complexes to binuclear Pd(III) complexes and subsequent C-X reductive elimination from the resulting binuclear Pd(III) complexes have confirmed the viability of C-X bond-forming reactions mediated by binuclear Pd(III) complexes. Metal-metal bond formation, which proceeds concurrently with oxidation of binuclear Pd(II) complexes, can lower the activation barrier for oxidation. We also discuss experimental and theoretical work that suggests that C-X reductive elimination is also facilitated by redox cooperation of both metals during reductive elimination. The effect of ligand modification on the structure and reactivity of binuclear Pd(III) complexes will be presented in light of the impact that ligand structure can exert on the structure and reactivity of binuclear Pd(III) complexes. Historically, oxidation reactions similar to those discussed here have been proposed to proceed via mononuclear Pd(IV) intermediates, and the hypothesis of mononuclear Pd(II/IV) catalysis has guided the successful development of many reactions. Herein we discuss differences between monometallic Pd(IV) and bimetallic Pd(III) redox catalysis. We address whether appreciation of the relevance of bimetallic Pd(III) redox catalysis is of academic interest exclusively, serving to provide a more nuanced description of catalysis, or if the new insight regarding bimetallic Pd(III) chemistry can be a platform to enable future reaction development. To this end, we describe an example in which the hypothesis of bimetallic redox chemistry guided reaction development, leading to the discovery of reactivity distinct from monometallic catalysts.

Bimetallic Reductive Elimination from Dinuclear Pd(III) Complexes

In 2009, we reported C-halogen reductive elimination reactions from dinuclear Pd(III) complexes and implicated dinuclear intermediates in Pd(OAc)(2)-catalyzed C-H oxidation chemistry. Herein, we report results of a thorough experimental and theoretical investigation of the mechanism of reductive elimination from such dinuclear Pd(III) complexes, which establish the role of each metal during reductive elimination. Our results implicate reductive elimination from a complex in which the dinuclear core is intact and suggest that redox synergy between the two metals is responsible for the facile reductive elimination reactions observed.

On the Mechanism of Palladium-Catalyzed Aromatic C-H Oxidation

The mechanism of Pd-catalyzed aromatic C-H oxidation chemistry continues to be vigorously discussed. Historically, Pd(II)/Pd(IV) catalysis cycles have been proposed. Herein, we present a detailed study of Pd(OAc)(2)-catalyzed aromatic C-H chlorination and propose dinuclear Pd(III) complexes as intermediates. We have identified a succinate-bridged dinuclear Pd(II) complex, which self-assembles during catalysis, as the catalyst resting state. In situ monitoring of catalysis has revealed that chlorination proceeds with turnover-limiting oxidation of a dinuclear resting state, and that acetate ions, liberated during the formation of the catalyst resting state, catalyze the bimetallic oxidation. Informed by reaction kinetics analysis, relevant dinuclear Pd(III) complexes have been prepared and observed to undergo selective C-Cl reductive elimination. Based on the combination of kinetic data obtained during catalysis and explicit structural information of relevant intermediates, we propose a Pd(II)(2)/Pd(III)(2) catalysis cycle for Pd(OAc)(2)-catalyzed aromatic C-H chlorination.

Synthesis and structure of solution-stable one-dimensional palladium wires

One-dimensional metal wires are valuable materials because of their optical and electronic anisotropy, and they have potential utility in devices such as photovoltaic cells and molecular sensors. However, despite more than a century of research, only a few examples exist of well-defined one-dimensional (1D) metal wires that allow for the rational variation of conductivity. Herein we describe the first examples of 1D molecular wires supported by Pd-Pd bonds, the thin-film conductive properties of which can be altered by controlled molecular changes. Wires based on Pd(III) give semiconducting films with a modifiable bandgap, whereas wires based on Pd(2.5) give films that display metallic conductivity above 200 K: a metallic state has not been reported previously for any polymer composed of 1D metal wires. The wires are infinite in the solid state and maintain 1D structures in solution with lengths of up to 750 nm. Solution stability enables thin film coating, a requisite for device fabrication using molecular wires.

Water Oxidation Catalysis by Co(II) Impurities in Co(III)4O4 Cubanes

The observed water oxidation activity of the compound class Co4O4(OAc)4(Py–X)4 emanates from a Co(II) impurity. This impurity is oxidized to produce the well-known Co-OEC heterogeneous cobaltate catalyst, which is an active water oxidation catalyst. We present results from electron paramagnetic resonance spectroscopy, nuclear magnetic resonance line broadening analysis, and electrochemical titrations to establish the existence of the Co(II) impurity as the major source of water oxidation activity that has been reported for Co4O4 molecular cubanes. Differential electrochemical mass spectrometry is used to characterize the fate of glassy carbon at water oxidizing potentials and demonstrate that such electrode materials should be used with caution for the study of water oxidation catalysis.

Water Oxidation Catalysis by Co(II) Impurities in Co(III)[subscript 4]O[subscript 4] Cubanes

The observed water oxidation activity of the compound class Co4O4(OAc)4(Py–X)4 emanates from a Co(II) impurity. This impurity is oxidized to produce the well-known Co-OEC heterogeneous cobaltate catalyst, which is an active water oxidation catalyst. We present results from electron paramagnetic resonance spectroscopy, nuclear magnetic resonance line broadening analysis, and electrochemical titrations to establish the existence of the Co(II) impurity as the major source of water oxidation activity that has been reported for Co4O4 molecular cubanes. Differential electrochemical mass spectrometry is used to characterize the fate of glassy carbon at water oxidizing potentials and demonstrate that such electrode materials should be used with caution for the study of water oxidation catalysis.

Palladium(III) in Synthesis and Catalysis

While the organometallic chemistry of Pd in its (0), (+II), and (+IV) oxidation states is well-established, organometallic Pd(III) chemistry remains widely unexplored. Few characterized Pd(III) complexes are known, which has inhibited detailed study of the organometallic chemistry of Pd(III). In this review, the potential roles of both mono- and dinuclear Pd(III) complexes in organometallic chemistry will be discussed. While not widely recognized, Pd in the (+III) oxidation state may play a significant role in a variety of known Pd-catalyzed reactions.