David E. Robinson

The influence of substrate stiffness gradients on primary human dermal fibroblasts.

Materials mechanical properties are known to be an important regulator of cellular processes such as proliferation, differentiation and migration, and have seen increasing attention in recent years. At present, there are only few approaches where the mechanical properties of thin films can be controllably varied across an entire surface. In this work, we present a technique for controlled generation of gradients of surface elastic moduli involving a weak polyelectrolyte multilayer (PEM) system of approximately 100 nm thickness and time dependent immersion in a solution of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) as a crosslinking agent. Uniform surface chemistry across the gradient and wettability was provided by the addition of a 10 nm thick plasma polymer layer deposited from vapour of either allylamine or acrylic acid. We used the resultant stiffness gradients (0.5-110 MPa in hydrated state) to investigate the adhesion, morphology and proliferation on human dermal fibroblasts (HDFs). We show that substrate mechanical properties strongly influence HDF cell fate. We also found that in the experimental range of surface properties used in this study, the surface stiffness was a stronger driving force to cells fate compared to chemistry and wettability.

The link between mechanisms of deposition and the physico-chemical properties of plasma polymer films

Film thickness and functional group retention are routinely measured parameters for plasma polymers. It is known that other parameters such as density, solubility and mechanical properties can affect the performance of the plasma polymer film, however such parameters are not often measured; nor is there any understanding of the link between the mechanisms of film growth and these properties. In this investigation we produced thin films from three classes of commonly used plasma polymers (hydrocarbons, glymes and carboxylic acids). By choosing the monomer structure and applied RF power, the dominant mechanism of film growth was varied between ionic deposition and neutral grafting. The density, solubility and modulus of the resulting films were then measured by atomic force microscopy. Films grown from saturated monomers had higher moduli, were less soluble, and surprisingly had lower density compared to their unsaturated analogues. The results demonstrate that cognizance of the mechanism of film growth allows the physical properties of the film to be tailored for specific applications.

Development of a surface to enhance the effectiveness of fibroblast growth factor 2 (FGF-2)

Growth factors (GFs) play an important role in biological processes such as cell proliferation, differentiation and angiogenesis. GFs are known to bind to glycosaminoglycans (GAGs) in the extracellular matrix, aiding projection from degradation and pooling the GFs for quick response to biological stimuli in vivo. GFs are typically expensive and have a relatively short half-life in culture media, requiring regular replenishment. Here the cooperative binding of GF to a plasma polymerised surface decorated with heparin, and the subsequent culture of primary human dermal fibroblasts (HDFs) is investigated. A simple one-step technique suitable for coating a wide range of different substrates was utilised. Substrates such as culture-ware, scaffolds, bandages and devices for implantation could be coated. The modified surface was compared to standard culture techniques of addition of GF to the media. Results demonstrate that surface bound heparin and FGF-2 have a greater effect on cell proliferation especially at reduced serum concentrations. With performance equivalent to supplementing the media achieved at as little as 1% total FGF-2 added. The protective cooperative effect of FGF-2-GAG bound to modified surface at the interface could lead to reduced costs by reduction of FGF-2 required. Furthermore, for applications such as chronic non-healing wounds, bandages can be produced modified by plasma and decorated with GAGs that could utilise and protect important GFs. This would effectively re-introduce important biomolecules which are protected by GAG binding into a harsh environment.

Alcohol Costs and Workplace Policies: Two Surveys of Employers

The misuse of alcohol can have serious consequences for workplace behaviour. Existing estimates of the costs of these problems in the UK have focused on sickness absences of only the most severely dependent drinkers. Two surveys of employing organisations were undertaken to assess the scope for improving estimates of alcohol related workplace costs from company records, and to identify the type of information organisations require to influence decisions about adopting workplace policies.The results from the national telephone survey of 189 organisations and in depth interviews with 25 organisations in the Hull and York area revealed avoidable gaps in awareness of alcohol problems in the workplace, and little penetration of existing educational campaigns. Record systems were found to be mixed in content and only of limited use in monitoring alcohol related problems. While showing little interest in to/a/costs, organisations would be prepared to adopt workplace policies, if they had knowledge of effective p...

Immobilization of vitronectin-binding heparan sulfates onto surfaces to support human pluripotent stem cells

Functionalizing medical devices with polypeptides to enhance their performance has become important for improved clinical success. The extracellular matrix (ECM) adhesion protein vitronectin (VN) is an effective coating, although the chemistry used to attach VN often reduces its bioactivity. In vivo, VN binds the ECM in a sequence-dependent manner with heparan sulfate (HS) glycosaminoglycans. We reasoned therefore that sequence-based affinity chromatography could be used to isolate a VN-binding HS fraction (HS9) for use as a coating material to capture VN onto implant surfaces. Binding avidity and specificity of HS9 were confirmed by enzyme-linked immunosorbent assay (ELISA) and surface plasmon resonance (SPR)-based assays. Plasma polymerization of allylamine (AA) to tissue culture-treated polystyrene (TCPS) was then used to capture and present HS9 as determined by radiolabeling and ELISA. HS9-coated TCPS avidly bound VN, and this layered surface supported the robust attachment, expansion, and maintenance of human pluripotent stem cells. Compositional analysis demonstrated that 6-O- and N-sulfation, as well as lengths greater than three disaccharide units (dp6) are critical for VN binding to HS-coated surfaces. Importantly, HS9 coating reduced the threshold concentration of VN required to create an optimally bioactive surface for pluripotent stem cells. We conclude that affinity-purified heparan sugars are able to coat materials to efficiently bind adhesive factors for biomedical applications.