David E. Williams

Inhibition of neuroblastoma tumor growth by targeted delivery of microRNA-34a using anti-disialoganglioside GD2 coated nanoparticles.

Background Neuroblastoma is one of the most challenging malignancies of childhood, being associated with the highest death rate in paediatric oncology, underlining the need for novel therapeutic approaches. Typically, patients with high risk disease undergo an initial remission in response to treatment, followed by disease recurrence that has become refractory to further treatment. Here, we demonstrate the first silica nanoparticle-based targeted delivery of a tumor suppressive, pro-apoptotic microRNA, miR-34a, to neuroblastoma tumors in a murine orthotopic xenograft model. These tumors express high levels of the cell surface antigen disialoganglioside GD2 (GD2), providing a target for tumor-specific delivery. Principal Findings Nanoparticles encapsulating miR-34a and conjugated to a GD2 antibody facilitated tumor-specific delivery following systemic administration into tumor bearing mice, resulted in significantly decreased tumor growth, increased apoptosis and a reduction in vascularisation. We further demonstrate a novel, multi-step molecular mechanism by which miR-34a leads to increased levels of the tissue inhibitor metallopeptidase 2 precursor (TIMP2) protein, accounting for the highly reduced vascularisation noted in miR-34a-treated tumors. Significance These novel findings highlight the potential of anti-GD2-nanoparticle-mediated targeted delivery of miR-34a for both the treatment of GD2-expressing tumors, and as a basic discovery tool for elucidating biological effects of novel miRNAs on tumor growth.

Kinetics of immunoassays with particles as labels: effect of antibody coupling using dendrimers as linkers

In this article, we report on poly(amidoamine) dendrimers (PAMAM) as coupling agents for recombinant single-chain (ScFv) antibodies to nanoparticle (NP) labels, for use in immunoassay. We present a simple theory for the kinetics of particle capture onto a surface by means of an antibody-antigen reaction, in which the important parameter is the fraction of the particle surface that is active for reaction. We describe how increasing the generation number of the linking dendrimers significantly increased the fraction of the NP surface that is active for antigen binding and consequently also increased the assay kinetic rates. Use of dendrimers for conjugation of the NP to the antibody resulted in a significantly higher surface coverage of active antibody, in comparison with mono-valent linker chemistry. As a direct consequence, the increase in effective avidity significantly out-weighed any effect of a decreased diffusion coefficient due to the NP, when compared to that of a molecular dye-labelled antibody. The signal to noise ratio of the G4.5 dendrimer-sensitised nanoparticles out-performed the dye-labelled antibody by approximately four-fold. Particle aggregation experiments with the multi-valent antigen CRP demonstrated reaction-limited aggregation whose rate increased significantly with increasing generation number of the dendrimer linker.

Reactive amine surfaces for biosensor applications, prepared by plasma-enhanced chemical vapour modification of polyolefin materials

Here we have demonstrated a solventless plasma-based process that integrates low-cost, high throughput, high reproducibility and ecofriendly process for the functionalization of the next-generation point-of-care device platforms. Amine functionalities were deposited by plasma-enhanced chemical vapour deposition (PECVD) using a new precursor. The influence of the plasma RF power and the deposition time on surfacial properties, as well as their effect on the reactivity and content of amino groups was investigated. The key process determinants were to have a sufficient power in the plasma to activate and partially fragment the monomer but not too much as to lose the reactive amine functionality, and sufficient deposition time to develop a reactive layer but not to consume or erode the amine reactivity. An immunoassay performed using human immunoglobulin (IgG) as a model analyte showed an improvement of the detection limit by two orders of magnitude beyond that obtained using devices activated by liquid-phase reaction.

Deposition of chemically reactive and repellent sites on biosensor chips for reduced non-specific binding.

The performances of new polymeric materials with excellent optical properties and good machinability have led the biomedical diagnostics industry to develop cheap disposable biosensor platforms appropriate for point of care applications. Zeonor, a type of cycloolefin polymer (COP), is one such polymer that presents an excellent platform for biosensor chips. These polymer substrates have to be modified to have suitable physico-chemical properties for immobilizing proteins. In this work, we have demonstrated the amine functionalization of COP substrates, by plasma enhanced chemical vapour deposition (PECVD), through codeposition of ethylene diamine and 3-aminopropyltriethoxysilane precursors, for building chemistries on the plastic chip. The elemental composition, adhesion, ageing and reactivity of the plasma polymerized film were examined. The Si-O functionality present in amino silane contributed for a good interfacial adhesion of the coating to COP substrates and also acted as a network building layer for plasma polymerization. Wet chemical modification was then carried out on the amine functionalized chips to create chemically reactive isothiocyanate sites and protein repellent fluorinated sites on the same chip. The density of the reactive and repellent sites was altered by choosing appropriate mixtures of homofunctional phenyldiisothiocyanate (PDITC), pentafluoroisothiocyanate (5FITC) and phenylisothiocyanate (PITC) compounds. By tailoring the density of reactive binding sites and protein repellent sites, the non-specific binding of ssDNA has been decreased to a significant extent.

Ultrathin and smooth poly(methyl methacrylate) (PMMA) films for label-free biomolecule detection with total internal reflection ellipsometry (TIRE).

Ultrathin poly(methyl methacrylate) PMMA films were prepared on gold substrates by spin coating PMMA dissolved in toluene. By varying the concentration of PMMA, spin coating speed and curing condition, we obtained very smooth and ultrathin PMMA films. The PMMA films were transformed into highly reactive film containing carboxylic functionalities using UV/O(3) irradiation. These films were shown to remain stable and reactive for at least one week. We then demonstrated the application of the UV/O(3) treated PMMA films for the detection of microRNAs using a label-free detection method called total internal reflection ellipsometry (TIRE). A limit of detection of 10 pM was established. The technique proposed here is a simple and quick method for generating carboxylic functional films for label-free bioanalytical detection techniques.

Simple approach to study biomolecule adsorption in polymeric microfluidic channels.

Herein a simple analytical method is presented for the characterization of biomolecule adsorption on cyclo olefin polymer (COP, trade name: Zeonor(®)) substrates which are widely used in microfluidic lab-on-a-chip devices. These Zeonor(®) substrates do not possess native functional groups for specific reactions with biomolecules. Therefore, depending on the application, such substrates must be functionalized by surface chemistry methods to either enhance or suppress biomolecular adsorption. This work demonstrates a microfluidic method for evaluating the adsorption of antibodies and oligonucleotides surfaces. The method uses centrifugal microfluidic flow-through chips and can easily be implemented using common equipment such as a spin coater. The working principle is very simple. The user adds 40 L of the solution containing the sample to the starting side of a microfluidic channel, where it is moved through by centrifugal force. Some molecules are adsorbed in the channel. The sample is then collected at the other end in a small reservoir and the biomolecule concentration is measured. As a pilot application, we characterized the adsorption of goat anti-human IgG and a 20-mer DNA on Zeonor(®), and on three types of functionalized Zeonor: 3-aminopropyltriethoxysilane (APTES) modified surface with mainly positive charge, negatively charged surface with immobilized bovine serum albumin (BSA), and neutral, hydrogel-like film with polyethylene glycol (PEG) characteristics. This simple analytical approach adds to the fundamental understanding of the interaction forces in real, microfluidic systems. This method provides a straightforward and rapid way to screen surface compositions and chemistry, and relate these to their effects on the sensitivity and resistance to non-specific binding of bioassays using them. In an additional set of experiments, the surface area of the channels in this universal microfluidic chip was increased by precision milling of microscale trenches. This modified surface was then coated with APTES and tested for its potential to serve as a unique protein dilution feature.

Functionalization of cyclo-olefin polymer substrates by plasma oxidation: Stable film containing carboxylic acid groups for capturing biorecognition elements

Many current designs in biomedical diagnostics devices are based on the use of low cost, disposable, easy-to-fabricate chips made of plastic material, typically a cyclo-olefin polymer (COP). Low autofluorescence properties of such material, among others, make it ideal substrate for fluorescence-based applications. Functionalization of this plastic substrate for biomolecule attachment is therefore of great importance and the quality of films produced on such surface have often a significant influence on the performance of the device. In this communication we discuss the surface chemistry and some other characteristics of hydrophilic films, containing carboxylic acid functional groups, formed by plasma oxidation of COP and also films containing cross-linked, polymerized acryclic acid produced by sequential deposition of tetraorthosilicate and acrylic acid by plasma enhanced chemical vapor deposition (PECVD). Immobilization of labeled, single stranded DNA revealed high binding capacity for both coatings. To our best knowledge, this is the first example of direct immobilization of biomolecules on just plasma oxidized COP. Furthermore, more sophisticated treatment of the oxidized plastic substrate by PECVD with other organic precursors increased the binding capacity by some 40% than that of just plasma oxidized COP. The carboxy functionalized surfaces, due to the negative charge of the carboxy groups, showed very positive trends towards increasing the signal to noise ratio when charged biomolecules such as DNA, are used.

Controlling colloidal stability of silica nanoparticles during bioconjugation reactions with proteins and improving their longer-term stability, handling and storage

Despite the potential of antibody-coated nanoparticles (Ab-NPs) in many biological applications, there are very few successful, commercially available examples in which the carefully engineered nanomaterial has made it beyond the laboratory bench. Herein we explore the robustness and cost of protein-nanoparticle conjugation. Using multivalent polyamidoamine (PAMAM) dendrimers and dextran as crosslinkers, it was possible to retain colloidal stability during (i) NP-linker binding and (ii) the subsequent conjugation reaction between linker-coated NPs and proteins to generate monodisperse Ab-NPs. This was attributed to the physicochemical properties of the linkers, which were inherited by the NPs and thus benefited colloidal stability. Attaching negatively charged, EDC/sulfo-NHS-activated PAMAM to the NPs contributed to overall negative charge of particles, and in turn led to high electrostatic attraction between the protein and PAMAM-coated NPs during the reaction conditions. In contrast, using an uncharged, EDC/NHS-activated PAMAM dendrimer led to NP aggregation and lower protein binding efficiency. Dextran as a cost-effective, uncharged macromolecule allowed for steric repulsions between neighbouring particles during protein binding, thus inducing NP stability in solution, and also produced monodisperse Ab-NPs. By freeze-drying Ab-NPs from a 1% BSA solution it is possible to reconstitute the solid-form colloid back to a stable state by adding solvent and simply shaking the sample vial by hand. The consequences of the different surface chemistries and freeze-drying stabilizers on the colloidal stability of the NPs were probed by dynamic light scattering. The performance of Ab-NPs was compared in a simple fluorescence linked immunoassay in whole serum. Interestingly, the signal-to-noise ratios were similar for Ab-NPs using PAMAM and dextran, despite dextran binding fewer Abs per NP. We believe this work provides researchers with the tools and strategies for reliably generating Ab-NPs that can be used for a variety of biological applications.

Plasma functionalization of AFM tips for measurement of chemical interactions.

In this paper, a new, fast, reproducible technique for atomic force microscopy (AFM) tips functionalization used for chemical interaction measurements is described. Precisely, the deposition of an aminated precursor is performed through plasma-enhanced chemical vapor deposition (PECVD) in order to create amine functional groups on the AFM tip and cantilever. The advantages of the precursor, aminopropyltriethoxysilane (APTES), were recently demonstrated for amine layer formation through PECVD deposition on polymeric surfaces. We extended this procedure to functionalize AFM probes. Titration force spectroscopy highlights the successful functionalization of AFM tips as well as their stability and use under different environmental conditions.

TIRF microscopy as a screening method for non-specific binding on surfaces.

We report a method for studying nanoparticle-biosensor surface interactions based on total internal reflection fluorescence (TIRF) microscopy. We demonstrate that this simple technique allows for high throughput screening of non-specific adsorption (NSA) of nanoparticles on surfaces of different chemical composition. Binding events between fluorescent nanoparticles and functionalized Zeonor® surfaces are observed in real-time, giving a measure of the attractive or repulsive properties of the surface and the kinetics of the interaction. Three types of coatings have been studied: one containing a polymerized aminosilane network with terminal -NH(2) groups, a second film with a high density of -COOH surface groups and the third with sterically restraining branched poly(ethylene)glycol (PEG) functionality. TIRF microscopy revealed that the NSA of nanoparticles with negative surface charge on such modified coatings decreased in the following order -NH(2)>-branched PEG>-COOH. The surface specificity of the technique also allows discrimination of the degree of NSA of the same surface at different pH.