David J. Brockwell

Pulling geometry defines the mechanical resistance of a β-sheet protein

Proteins show diverse responses when placed under mechanical stress. The molecular origins of their differing mechanical resistance are still unclear, although the orientation of secondary structural elements relative to the applied force vector is thought to have an important function. Here, by using a method of protein immobilization that allows force to be applied to the same all-β protein, E2lip3, in two different directions, we show that the energy landscape for mechanical unfolding is markedly anisotropic. These results, in combination with molecular dynamics (MD) simulations, reveal that the unfolding pathway depends on the pulling geometry and is associated with unfolding forces that differ by an order of magnitude. Thus, the mechanical resistance of a protein is not dictated solely by amino acid sequence, topology or unfolding rate constant, but depends critically on the direction of the applied extension.

Force mode atomic force microscopy as a tool for protein folding studies

Abstract The advent of a new class of force microscopes designed specifically to “pull” biomolecules has allowed non-specialists to use force microscopy as a tool to study single-molecule protein unfolding. This powerful new technique has the potential to explore regions of the protein energy landscape that are not accessible in conventional bulk studies. It has the added advantage of allowing direct comparison with single-molecule simulation experiments. However, as with any new technique, there is currently no well described consensus for carrying out these experiments. Adoption of standard schemes of data selection and analysis will facilitate comparison of data from different laboratories and on different proteins. In this review, some guidelines and principles, which have been adopted by our laboratories, are suggested. The issues associated with collecting sufficient high quality data and the analysis of those data are discussed. In single-molecule studies, there is an added complication since an element of judgement has to be applied in selecting data to analyse; we propose criteria to make this process more objective. The principal sources of error are identified and standardised methods of selecting and analysing the data are proposed. The errors associated with the kinetic parameters obtained from such experiments are evaluated. The information that can be obtained from dynamic force experiments is compared, both quantitatively and qualitatively to that derived from conventional protein folding studies.

Protein folding mechanisms: new methods and emerging ideas.

During the past year, advances in our understanding of folding mechanisms have been made through detailed experimental and theoretical studies of a number of proteins. The development of new methods has allowed the earliest events in folding to be probed and the measurement of folding at the level of individual molecules is now possible, opening the door to exciting new experiments.

Identification of a mechanical rheostat in the hydrophobic core of protein L.

The ability of proteins and their complexes to withstand or respond to mechanical stimuli is vital for cells to maintain their structural organisation, to relay external signals and to facilitate unfolding and remodelling. Force spectroscopy using the atomic force microscope allows the behaviour of single protein molecules under an applied extension to be investigated and their mechanical strength to be quantified. protein L, a simple model protein, displays moderate mechanical strength and is thought to unfold by the shearing of two mechanical sub-domains. Here, we investigate the importance of side-chain packing for the mechanical strength of protein L by measuring the mechanical strength of a series of protein L variants containing single conservative hydrophobic volume deletion mutants. Of the five thermodynamically destabilised variants characterised, only one residue (I60V) close to the interface between two mechanical sub-domains was found to differ in mechanical properties to wild type (ΔFI60V–WT = − 36 pN at 447 nm s− 1, ΔxuI60V–WT = 0.2 nm). Φ-value analysis of the unfolding data revealed a highly native transition state. To test whether the number of hydrophobic contacts across the mechanical interface does affect the mechanical strength of protein L, we measured the mechanical properties of two further variants. protein L L10F, which increases core packing but does not enhance interfacial contacts, increased mechanical strength by 13 ± 11 pN at 447 nm s− 1. By contrast, protein L I60F, which increases both core and cross-interface contacts, increased mechanical strength by 72 ± 13 pN at 447 nm s− 1. These data suggest a method by which nature can evolve a varied mechanical response from a limited number of topologies and demonstrate a generic but facile method by which the mechanical strength of proteins can be rationally modified.

Skp is a multivalent chaperone of outer-membrane proteins.

The trimeric chaperone Skp sequesters outer-membrane proteins (OMPs) within a hydrophobic cage, thereby preventing their aggregation during transport across the periplasm in Gram-negative bacteria. Here, we studied the interaction between Escherichia coli Skp and five OMPs of varying size. Investigations of the kinetics of OMP folding revealed that higher Skp/OMP ratios are required to prevent the folding of 16-stranded OMPs compared with their 8-stranded counterparts. Ion mobility spectrometry–mass spectrometry (IMS–MS) data, computer modeling and molecular dynamics simulations provided evidence that 10- to 16-stranded OMPs are encapsulated within an expanded Skp substrate cage. For OMPs that cannot be fully accommodated in the expanded cavity, sequestration is achieved by binding of an additional Skp trimer. The results suggest a new mechanism for Skp chaperone activity involving the coordination of multiple copies of Skp in protecting a single substrate from aggregation.

Dissecting the Effects of Periplasmic Chaperones on the In Vitro Folding of the Outer Membrane Protein PagP

Although many periplasmic folding factors have been identified, the mechanisms by which they interact with unfolded outer membrane proteins (OMPs) to promote correct folding and membrane insertion remain poorly understood. Here, we have investigated the effect of two chaperones, Skp and SurA, on the folding kinetics of the OMP, PagP. Folding kinetics of PagP into both zwitterionic diC12:0PC (1,2-dilauroyl-sn-glycero-3-phosphocholine) liposomes and negatively charged 80:20 diC12:0PC:diC12:0PG [1,2-dilauroyl-sn-glycero-3-phospho-(1′-rac-glycerol)] liposomes were investigated using a combination of spectroscopic and SDS-PAGE assays. The results indicate that Skp modulates the observed rate of PagP folding in a manner that is dependent on the composition of the membrane and the ionic strength of the buffer used. These data suggest that electrostatic interactions play an important role in Skp-assisted substrate delivery to the membrane. In contrast, SurA showed no effect on the observed folding rates of PagP, consistent with the view that these chaperones act by distinct mechanisms in partially redundant parallel chaperone pathways that facilitate OMP assembly. In addition to delivery of the substrate protein to the membrane, the ability of Skp to prevent OMP aggregation was investigated. The results show that folding and membrane insertion of PagP can be restored, in part, by Skp in conditions that strongly favour PagP aggregation. These results illustrate the utility of in vitro systems for dissecting the complex folding environment encountered by OMPs in the periplasm and demonstrate the key role of Skp in holding aggregation-prone OMPs prior to their direct or indirect delivery to the membrane.

Mechanistic studies of the biogenesis and folding of outer membrane proteins in vitro and in vivo: What have we learned to date?

Research into the mechanisms by which proteins fold into their native structures has been on-going since the work of Anfinsen in the 1960s. Since that time, the folding mechanisms of small, water-soluble proteins have been well characterised. By contrast, progress in understanding the biogenesis and folding mechanisms of integral membrane proteins has lagged significantly because of the need to create a membrane mimetic environment for folding studies in vitro and the difficulties in finding suitable conditions in which reversible folding can be achieved. Improved knowledge of the factors that promote membrane protein folding and disfavour aggregation now allows studies of folding into lipid bilayers in vitro to be performed. Consequently, mechanistic details and structural information about membrane protein folding are now emerging at an ever increasing pace. Using the panoply of methods developed for studies of the folding of water-soluble proteins. This review summarises current knowledge of the mechanisms of outer membrane protein biogenesis and folding into lipid bilayers in vivo and in vitro and discusses the experimental techniques utilised to gain this information. The emerging knowledge is beginning to allow comparisons to be made between the folding of membrane proteins with current understanding of the mechanisms of folding of water-soluble proteins.

An in vivo platform for identifying inhibitors of protein aggregation

Protein aggregation underlies an array of human diseases, yet only one small molecule therapeutic has been successfully developed to date. Here, we introduce an in vivo system, based on a β-lactamase tripartite fusion construct, capable of identifying aggregation-prone sequences in the periplasm of Escherichia coli and inhibitors that prevent their aberrant self-assembly. We demonstrate the power of the system using a range of proteins, from small unstructured peptides (islet amyloid polypeptide and amyloid β) to larger, folded immunoglobulin domains. Configured in a 48-well format, the split β-lactamase sensor readily differentiates between aggregation-prone and soluble sequences. Performing the assay in the presence of 109 compounds enabled a rank ordering of inhibition and revealed a new inhibitor of IAPP aggregation. This platform can be applied to both amyloidogenic and other aggregation-prone systems, independent of sequence or size, and can identify small molecules or other factors able to ameliorate or inhibit protein aggregation.

Malleability of the folding mechanism of the outer membrane protein PagP: parallel pathways and the effect of membrane elasticity.

Understanding the interactions between membrane proteins and the lipid bilayer is key to increasing our ability to predict and tailor the folding mechanism, structure and stability of membrane proteins. Here, we have investigated the effects of changing the membrane composition and the relative concentrations of protein and lipid on the folding mechanism of the bacterial outer membrane protein PagP. The folding pathway, monitored by tryptophan fluorescence, was found to be characterized by a burst phase, representing PagP adsorption to the liposome surface, followed by a time course that reflects the folding and insertion of the protein into the membrane. In 1,2-dilauroyl-sn-glycero-3-phosphocholine (diC12:0PC) liposomes, the post-adsorption time course fits well to a single exponential at high lipid-to-protein ratios (LPRs), but at low LPRs, a second exponential phase with a slower folding rate constant is observed. Interrupted refolding assays demonstrated that the two exponential phases reflect the presence of parallel folding pathways. Partitioning between these pathways was found to be modulated by the elastic properties of the membrane. Folding into mixed 1,2-dilauroyl-sn-glycero-3-phosphoethanolamine:diC12:0PC liposomes resulted in a decrease in PagP adsorption to the liposomes and a switch to the slower folding pathway. By contrast, inclusion of 1,2-dilauroyl-sn-glycero-3-phosphoserine into diC12:0PC liposomes resulted in a decrease in the folding rate of the fast pathway. The results highlight the effect of lipid composition in tailoring the folding mechanism of a membrane protein, revealing that membrane proteins have access to multiple, competing folding routes to a unique native structure.

A Force-Activated Trip Switch Triggers Rapid Dissociation of a Colicin from Its Immunity Protein

A single-molecule force study shows that rapid dissociation of a high-affinity protein interaction can be triggered by site-specific remodelling of one protein partner, and that prevention of remodelling maintains avidity.