David J. Lunn

Cylindrical Micelles of Controlled Length with a π-Conjugated Polythiophene Core via Crystallization-Driven Self-Assembly

Solution self-assembly of the regioregular polythiophene-based block copolymer poly(3-hexylthiophene)-b-poly(dimethylsiloxane) yields cylindrical micelles with a crystalline P3HT core. Monodisperse nanocylinders of controlled length have been prepared via crystallization-driven self-assembly using seed micelles as initiators.

Uniform, High Aspect Ratio Fiber-like Micelles and Block Co-micelles with a Crystalline π-Conjugated Polythiophene Core by Self-Seeding

Monodisperse fiber-like micelles with a crystalline π-conjugated polythiophene core with lengths up to ca. 700 nm were successfully prepared from the diblock copolymer poly(3-hexylthiophene)-block-polystyrene using a one-dimensional self-seeding technique. Addition of a polythiophene block copolymer with a different corona-forming block to the resulting nanofibers led to the formation of segmented B-A-B triblock co-micelles by crystallization-driven seeded growth. The key to these advances appears to be the formation of a relatively defect-free crystalline micelle core under the self-seeding conditions.

Dimensional Control of Block Copolymer Nanofibers with a π-Conjugated Core: Crystallization-Driven Solution Self-Assembly of Amphiphilic Poly(3-hexylthiophene)-b-poly(2-vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π-conjugated nanostructures of controlled length, we have studied the solution self-assembly of two asymmetric crystalline-coil, regioregular poly(3-hexylthiophene)-b-poly(2-vinylpyridine) (P3HT-b-P2VP) diblock copolymers, P3HT23-b-P2VP115 (block ratio=1:5) and P3HT44-b-P2VP115 (block ratio=ca. 1:3). The self-assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu-catalyzed azide-alkyne cycloaddition reactions of azide-terminated P2VP and alkyne end-functionalized P3HT homopolymers. When the block copolymers were self-assembled in a solution of a 50% (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP-selective alcoholic solvent (MeOH3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain-extended P3HT blocks. The crystallinity and π-conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide-angle X-ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT23-b-P2VP115 resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT23-b-P2VP115 unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L(w)/L(n) < 1.11) and lengths from about 100-300 nm, that were dependent on the unimer-to-seed micelle ratio.

Length control of supramolecular polymeric nanofibers based on stacked planar platinum(II) complexes by seeded-growth

The formation of high aspect ratio supramolecular polymeric nanofibers from square-planar platinum(II) complexes through Pt···Pt and π-π stacking interactions has been achieved with a small width (<15 nm), tunable length, and relatively narrow length distributions up to ca. 400 nm under conditions of kinetic control using small seed fibers as initiators.

Microfibres and macroscopic films from the coordination-driven hierarchical self-assembly of cylindrical micelles

Anisotropic nanoparticles prepared from block copolymers are of growing importance as building blocks for the creation of synthetic hierarchical materials. However, the assembly of these structural units is generally limited to the use of amphiphilic interactions. Here we report a simple, reversible coordination-driven hierarchical self-assembly strategy for the preparation of micron-scale fibres and macroscopic films based on monodisperse cylindrical block copolymer micelles. Coordination of Pd(0) metal centres to phosphine ligands immobilized within the soluble coronas of block copolymer micelles is found to induce intermicelle crosslinking, affording stable linear fibres comprised of micelle subunits in a staggered arrangement. The mean length of the fibres can be varied by altering the micelle concentration, reaction stoichiometry or aspect ratio of the micelle building blocks. Furthermore, the fibres aggregate on drying to form robust, self-supporting macroscopic micelle-based thin films with useful mechanical properties that are analogous to crosslinked polymer networks, but on a longer length scale.

Controlled thiol–ene post-polymerization reactions on polyferrocenylsilane homopolymers and block copolymers

Various thiols were reacted with poly(ferrocenylmethylvinylsilane) (PFMVS) homopolymers using the radical-mediated thiol–ene reaction with a view to preparing metallopolymers with diverse functional groups. Post-polymerization thiol–ene reactions on poly(ferrocenyldimethylsilane)-b-poly(ferrocenylmethylvinylsilane) (PFDMS-b-PFMVS) diblock copolymers with dodecanethiol and octadecanethiol afforded diblocks with a long hexane-soluble block and a short crystalline, hexane-insoluble PFDMS block. The thiol–ene reactions provided sufficient control to allow access to diblocks that were partially substituted, thus leaving vinyl groups that might subsequently be used for further post-polymerization reactions.

Transformation and patterning of supermicelles using dynamic holographic assembly

Although the solution self-assembly of block copolymers has enabled the fabrication of a broad range of complex, functional nanostructures, their precise manipulation and patterning remain a key challenge. Here we demonstrate that spherical and linear supermicelles, supramolecular structures held together by non-covalent solvophobic and coordination interactions and formed by the hierarchical self-assembly of block copolymer micelle and block comicelle precursors, can be manipulated, transformed and patterned with mediation by dynamic holographic assembly (optical tweezers). This allows the creation of new and stable soft-matter superstructures far from equilibrium. For example, individual spherical supermicelles can be optically held in close proximity and photocrosslinked through controlled coronal chemistry to generate linear oligomeric arrays. The use of optical tweezers also enables the directed deposition and immobilization of supermicelles on surfaces, allowing the precise creation of arrays of soft-matter nano-objects with potentially diverse functionality and a range of applications.