David M. Yourtee

The stability of methacrylate biomaterials when enzyme challenged: Kinetic and systematic evaluations

This study addressed whether methacrylate monomers and polymers used in dentistry might degrade from enzymolysis by acetylcholinesterase (ACHE), cholesterol esterase (CHE), porcine liver esterase (PRLE), and a pancreatic lipase (PNL). Short (hour) and long-term (day) exposures were performed. Product ratios were used to determine surface hydrolysis of the polymeric materials. Enzyme kinetics were studied for the monomers when challenged by ACHE, CHE, and PRLE. In the case of PRLE, the V(max) for the dimethacrylate substrates varied slightly, but amounted to as much as 10% of that of p-nitrophenylacetate. The K(m) for triethylene glycol dimethacrylate (TEGDMA) was 197 microM for ACHE and 1107 microM for CHE. The V(max) was 2.7 nmol/min for ACHE and 3.5 nmol/min for CHE. TEGDMA was converted by CHE at 2% the rate of cholesteryl oleate. Long-term incubations of monomers with CHE and ACHE produced degrees of hydrolysis that evidenced structure dependency in the ability of the enzymes to effect hydrolysis. Particularly resistant were aromativ derivatives and those with branching in methacrylate linkages. Overall, the study confirms the ability of physiologically important esterases to catalyze the hydrolysis of biomaterial methacrylates.

In vitro cytotoxicity of solid epoxy-based dental resins and their components

OBJECTIVE The objective of this study was to evaluate the effect of adding a spiroorthocarbonate (SOC) or a polyol on the cytotoxicity of epoxy-based dental resins. METHODS Resins contained one of the epoxies: diglycidyl ether Bisphenol A (GY-6004); 3,4-epoxycyclohexanemethyl-3,4-epoxycyclohexane carboxylate (UVR-6105); vinyl cyclohexane dioxide (ERL-4206) or the three-epoxy mixture (Epoxy-M). The SOC was t/t-2,3,8,9-di(tetramethylene)-1,5,7,11-tetraoxaspiro[5.5]undecane (SOC). The polyols were polytetrahydrofuran (p-THF-250) and polycaprolactone triol (TONE-301). The photoinitiator (4-octylphenyl)phenyliodonium hexafluoroantimonate and camphorquinone were used for light curing the resins. Four types of resins (epoxy, SOC/epoxy, polyol/epoxy and SOC/polyol/epoxy) were evaluated for cytotoxicity as solids in the agar diffusion assay and as aqueous extracts in the MTT assay using L929 cells. RESULTS In agar diffusion analysis, ERL-4206 and UVR-6105 resins were severely cytotoxic (+3), but the addition of SOC changed them to non-cytotoxic (-). Addition of 1-3% SOC changed Epoxy-M from mild (+) to non-cytotoxic. Adding SOC changed GY-6004 from moderate (+2) to mild (-) cytotoxicity. Generally, addition of SOC did not change cytotoxicity when added to polyol/epoxy combinations. Either polyol produced resins with reduced cytotoxicity when added to UVR-6105, but the opposite occurred when added to Epoxy-M resins. In MTT analysis, percent cell survival from 100 microliters resin extracts were statistically compared (ANOVA, p < 0.05). Epoxy-M and GY-6004 resin extracts were significantly less cytotoxic than UVR-6105 and ERL-4206 resin extracts were. Overall, the SOC component reduced the cytotoxicity of all SOC/epoxy combinations, except SOC/ERL-4206, which was significantly more cytotoxic than ERL-4206 resin extract. This may be the result of cell fixative effects observed for SOC/ERL-4206 in agar diffusion analysis. Addition of SOC produced significantly less cytotoxic SOC/polyol/Epoxy-M resins when compared to its non-SOC counterpart. The contrary result was obtained with SOC/polyol/UVR-6105 resin combinations. Consistent with agar diffusion results, adding polyol significantly decreased cytotoxicity of UVR-6105 resins. The cytotoxicity of these resins may be related to the 50% cytotoxicity (TC50) of their components as leachates. The TC50 values of the individual components were compared to BISGMA. Polyols, epoxy monomers, SOC monomer and camphorquinone were significantly (p < 0.05) less cytotoxic than BISGMA. SIGNIFICANCE Addition of SOCs and polyols in the formulation of epoxy-based resins may contribute to development of biocompatible dental composites.

Lipid Vesicles as Membrane Models for Toxicological Assessment of Xenobiotics

Traditionally animals and cell cultures have been used to assess the toxic potential of xenobiotics on cell membranes. In search for more reproducible, quantitative, cost- and time-effective assays, toxicologists have recently become interested in biomimetic lipid vesicle-based test systems. Lipid vesicles (liposomes) have long been appreciated as simple cell membrane models in biochemical and biophysical studies providing a good understanding of the physicochemical properties of liposome systems. More recently a number of reports have been published on the interactions of toxic substances with vesicles. Literature reports on liposome assays have appeared for widely different classes of xenobiotics, such as dental materials, antibiotics, detergents, and peptides. In this review we focus on those reports that contain a quantitative and significant correlation with more established toxicological tests like cell culture assays. We provide an introduction to the structure and main characteristics of vesicles and related lipid aggregates. The two main assays presented are leakage of fluorescence dyes and differential scanning calorimetry (DSC) measurements of the solid-ordered/liquid-disordered main phase transition temperature (Tm).

Comparison of tetrazolium colorimetric and 51Cr release assays for cytotoxicity determination of dental biomaterials.

OBJECTIVES The purpose of this study was to compare a methylthiazole tetrazolium (MTT) dye colorimetric method with the standard 51Cr assay as methods of assessing cytotoxicity of dental materials. METHODS Two MTT-based colorimetric formats, test tube and 96-well microplate methods, were compared to the 51Cr release assay. A series of eight dental materials were evaluated. Cytotoxicity profiles were determined for each test material. A TC50 value (Toxic Concentration required to kill 50% of the cells) was determined for each biomaterial, and these results were used to make statistical comparisons between the methods. RESULTS The three methods were statistically correlated (p<0.005) by comparison of the eight samples tested. That is, the same rank in toxicity was given by the two tetrazolium sample formats and the 51Cr method. SIGNIFICANCE The MTT assay was found to have several advantages in comparison to the current standard 51Cr release assay. Optimized in the 96-well format, complete dose response curves and greater sample comparisons can be made rapidly, making the MTT method more economical in time and cost. Furthermore, the MTT method is based on intracellular biochemical changes, measuring cell viability rather than cell morbidity, and has lower detectable limits than the 51Cr release method. There is also less detector chemical binding interference than encountered in the 51Cr release method.

Oxidative mutagenesis of doxorubicin-Fe(III) complex

Doxorubicin has a high affinity for inorganic iron, Fe(III), and has potential to form doxorubicin-Fe(III) complexes in biological systems. Indirect involvement of iron has been substantiated in the oxidative mutagenicity of doxorubicin. In this study, however, direct involvement of Fe(III) was evaluated in mutagenicity studies with the doxorubicin-Fe(III) complex. The Salmonella mutagenicity assay with strain TA102 was used with a pre-incubation step. The highest mutagenicity of doxorubicin-Fe(III) complex was observed at the dose of 2.5nmol/plate of the complex. The S9-mix decreased this highest mutagenicity but increased the number of revertants at a higher dose of 10nmol/plate of the complex. On the other hand, the mutagenicity of the doxorubicin-Fe(III) complex at the doses of 0.25, 0.5, 1 and 2nmol/plate was enhanced about twice by the addition of glutathione plus H(2)O(2). This enhanced mutagenicity as well as of the complex itself, the complex plus glutathione, and the complex plus H(2)O(2) were reduced by the addition of ADR-529, an Fe(III) chelator, and potassium iodide, a hydroxyl radical scavenger. These results indicate that doxorubicin-Fe(III) complex exert the mutagenicity through oxidative DNA damage and that Fe(III) is a required element in the mutagenesis of doxorubicin.

Effects of Dental Resins on TNF-α-induced ICAM-1 Expression in Endothelial Cells

Many reports have demonstrated inflammation after the placement of dental restorations. To explain this side-effect, we studied a biomarker in the inflammatory response. The intercellular adhesion molecule-1 (ICAM-1) is a key mediator for recruitment of leukocytes to the site of inflammation. Therefore, we investigated whether methacrylates (a BISGMA-based dental resin, BISGMA, and MAA) and Cyracure™ UVR 6105, an epoxy monomer, could alter ICAM-1 expression in unstimulated and TNF-a-stimulated endothelial cells. Six-well plates with monolayers of human umbilical vein cells, ECV 304 (ATCC CRL 1998), were exposed to TNF-a (1 ng/mL) in the presence and absence of subtoxic and TC50 doses of chemicals for 24 hrs at 37°C/5% CO2. Several doses of TNF-a (0.5-2 ng/mL) were co-incubated with 100 μL of undiluted aqueous dental resin extracts. Cells were harvested and stained with mAB FITC-conjugated anti-human ICAM-1 (CD54). ICAM-1 expression was measured by flow cytometry. Cells expressed basal levels of ICAM-1, which was up-regulated by TNF-a but was not changed by all samples studied. Except for UVR 6105, the methacrylates significantly decreased ICAM-1 expression in TNF-α-stimulated cells. These findings suggest that methacrylates may decrease the recruitment of leukocytes to sites of inflammation.

Chain melting temperature estimation for phosphatidyl cholines by quantum mechanically derived quantitative structure property relationships.

Geometries for 62 phosphatidylcholines (PC) were optimized using the AM1 semiempirical quantum mechanical method. Results obtained from these calculations were used to calculate 463 descriptors for each molecule. Quantitative Structure Property Relationships (QSPR) were developed from these descriptors to predict chain melting temperatures (Tm) for the 41 PCs in the training set. After screening each QSPR for statistical validity, the Tm values predicted by each statistically valid QSPR were compared to corresponding Tm values extracted from the literature. The most predictive, chemically meaningful QSPR provided Tmvalues which agreed with literature values to within experimental error. This QSPR was used to predict Tm values for the remaining 21 PCs to provide external validation for the model. These values also agreed with literature values to within experimental error. The descriptor developed by the final QSPR was the second order average information content, a topological information-theoretical descriptor.

Ion chromatographic determination of sugar phosphates in physiological samples.

Ion chromatography is shown to be capable of simultaneous determination of biologically important anions. Application of this technique is illustrated for the separation and quantification of the major anions present in rat brain and liver tissues. Sugar phosphates and carboxylic acids are separated on high-performance anion-exchange columns and are detected using chemically suppressed conductivity. Detection limits range from 20 to 100 pmol for the anions tested, including inositol phosphates, lactate, pyruvate, glucuronic acid-1-phosphate, fructose-6-phosphate and glucose-6-phosphate. The coefficient of variation for the determination of most anions was in the range 5-10%. Many of these anions are either difficult to separate with other methods, or require expensive radiochemical techniques for detection. This method should be applicable to other biological studies, from the flow of carbons in photosynthesis to the study of synaptic transmission.

Presence of aflatoxin B1 in human liver in the United States

A sample of human liver tissue obtained at biopsy for study of the in vitro metabolism of aflatoxin B1 was found to contain the toxin, apparently environmentally ingested, to the extent of 520 ng/g of wet liver. No other metabolites were detected. Upon incubation of a portion of the liver homogenate with an NADPH-generating system, the amount of aflatoxin B1 in the liver chloroform-extractable fraction was reduced to 250 ng/g, and another metabolite of higher polarity was observed, to the extent of 40 ng/g. The patient, a resident of the United States, was suffering from carcinoma of the rectum and liver.

Bisphenol A and its biomaterial monomer derivatives alteration of in vitro cytochrome P450 metabolism in rat, minipig, and human.

Bisphenol A (BPA) is a common structural component in a wide variety of biomaterial monomers. The effects of BPA and the following derivatives: bisphenol A glycidyl methacrylate (BisGMA), bisphenol A glycidyl diacrylate (BAGDA), bisphenol A ethoxylate dimethacrylate (BAEDM), bisphenol A dimethacrylate (BADM), and bisphenol A diglycidyl ether (BADGE) on mixed function oxidases (MFOs) are reported in this study. The rate of formation of metabolites from isoform-specific substrates for the MFOs (or cytochromes) CYP 1A, 2A, 2C, 2E, 3A, and 4A in the absence (control) and presence of BPA and derivatives was used to assess inhibition or stimulation of human, rat (male and female) liver, and minipig liver microsomal MFO activity. For human preparations the strongest inhibition by BPA was observed for CYP 2C. The inhibition was most prominent when a lower dose of BPA was used on the complete post-mitochondrial fraction. BPA inhibited rat microsomal CYP 1A isoform-specific metabolite production to 29 +/- 3% of control levels (100%). Biomaterial monomers exhibited mixed effects. For example, BPA stimulated CYP 4A in pooled human S9 to 129 +/- 1% of control. Also, BADM and BAGDA stimulated CYP 4A to 141% and 142% of control values, respectively.