David Musson

The Activity of Adiponectin in Bone

The adipokine adiponectin affects multiple target tissues and plays important roles in glucose metabolism and whole-body energy homeostasis. Circulating adiponectin levels in obese people are lower than in non-obese, and increased serum adiponectin is associated with weight loss. Numerous clinical studies have established that fat mass is positively related to bone mass, a relationship that is maintained by communication between the two tissues through hormones and cytokines. Since adiponectin levels inversely correspond to fat mass, its bone effects and its potential contribution to the relationship between fat and bone have been investigated. In clinical observational studies, adiponectin was found to be negatively associated with bone mineral density, suggesting it might be a negative regulator of bone metabolism. In order to identify the mechanisms that underlie the activity of adiponectin in bone, a large number of laboratory studies in vitro and in animal models of mice over-expressing or deficient of adiponectin have been carried out. Results of these studies are not entirely congruent, partly due to variation among experimental systems and partly due to the complex nature of adiponectin signaling, which involves a combination of multiple direct and indirect mechanisms.

Reduced Bone Density and Cortical Bone Indices in Female Adiponectin-Knockout Mice.

A positive association between fat and bone mass is maintained through a network of signaling molecules. Clinical studies found that the circulating levels of adiponectin, a peptide secreted from adipocytes, are inversely related to visceral fat mass and bone mineral density, and it has been suggested that adiponectin contributes to the coupling between fat and bone. Our study tested the hypothesis that adiponectin affects bone tissue by comparing the bone phenotype of wild-type and adiponectin-knockout (APN-KO) female mice between the ages of 8-37 weeks. Using a longitudinal study design, we determined body composition and bone density using dual energy x-ray absorptiometry. In parallel, groups of animals were killed at different ages and bone properties were analyzed by microcomputed tomography, dynamic histomorphometry, 3-point bending test, nanoindentation, and computational modelling. APN-KO mice had reduced body fat and decreased whole-skeleton bone mineral density. Microcomputed tomography analysis identified reduced cortical area fraction and average cortical thickness in APN-KO mice in all the age groups and reduced trabecular bone volume fraction only in young APN-KO mice. There were no major differences in bone strength and material properties between the 2 groups. Taken together, our results demonstrate a positive effect of adiponectin on bone geometry and density in our mouse model. Assuming adiponectin has similar effects in humans, the low circulating levels of adiponectin associated with increased fat mass are unlikely to contribute to the parallel increase in bone mass. Therefore, adiponectin does not appear to play a role in the coupling between fat and bone tissue.

Structure activity relationship study on the peptide hormone preptin, a novel bone-anabolic agent for the treatment of osteoporosis

Preptin is a 34-residue pancreatic hormone shown to be anabolic to bone in vitro and in vivo. The bone activity of preptin resides within the (1-16) N-terminal fragment. Due to its peptidic nature, the truncated fragment of preptin is enzymatically unstable; however it provides an attractive framework for the creation of stable analogues using various peptidomimetic techniques. An alanine scan of preptin (1-16) was undertaken which showed that substitution of Ser at position 3 or Pro at position 14 did not inhibit the proliferative activity of preptin in primary rat osteoblasts (bone-forming cells). Importantly, Ser-3 to Ala substitution also showed a significant activity on osteoblast differentiation in vitro and increased the formation of mineralised bone matrix. Additional modifications with non-proteinogenic amino acids at position 3 improved the stability in liver microsomes, but diminished the osteoblast proliferative activity. In addition, to provide greater structural diversity, a series of macrocyclic preptin (1-16) analogues was synthesised using head-to-tail and head-to-side chain macrolactamisation as well as ring-closing metathesis. However, a detrimental effect on osteoblast activity was observed upon macrocyclisation.

Novel homozygous mutations in the osteoprotegerin gene TNFRSF11B in two unrelated patients with juvenile Paget's disease

Most patients with juvenile Pagets disease (JPD) are homozygous for mutations in the gene TNFRSF11B that result in deficiency of osteoprotegerin (OPG) - a key regulator of bone turnover. So far, about 10 different OPG mutations have been described. The current study presents two novel OPG mutations in JPD patients. Patient 1 was diagnosed at the age of 9months when he presented with inability to sit up, slow growth, marked bone pain and very high levels of serum alkaline phosphatase. Patient 2 presented a milder phenotype. He was initially diagnosed with osteogenesis imperfecta, and although he had numerous fractures and bone deformity, he was still independently mobile at the age of 19years, when a diagnosis of JPD was confirmed. Sequence analysis of DNA samples from the patients determined two novel homozygous mutations in TNFSRF11B. Patient 1 (severe phenotype) had a large (245-251kbp) homozygous deletion beginning in intron 1 that resulted in loss of 4 of the 5 exons of TNFSRF11B, including the whole ligand-binding domain. Patient 2 had a homozygous missense mutation resulting in a Thr>Pro change in exon 2 of TNFSRF11B that is predicted to disrupt the OPG ligand-binding domain. Taken in conjunction with other published cases, these results are consistent with the hypothesis that the most severe phenotypes in JPD are seen in patients with major gene deletions or mutations affecting cysteine residues in the ligand-binding domain.

Enhanced osteoblastogenesis in three-dimensional collagen gels

Growth and differentiation of osteoblasts are often studied in cell cultures. In vivo, however, osteoblasts are embedded within a complex three-dimensional (3D) microenvironment, which bears little relation to standard culture flasks. Our study characterizes osteoblast-like cells cultured in 3D collagen gels and compares them with cells in two-dimensional (2D) cultures. Primary rat osteoblasts and MC3T3-E1 cells were seeded within type I collagen gels, and differentiation was determined by mineral staining and gene expression analysis. Cells growing in 3D gels showed positive mineral staining and induction of osteoblast marker genes earlier than cells growing in 2D. A number of genes, including osteocalcin, bone sialoprotein, alkaline phosphatase and dentin matrix protein 1, were already highly upregulated in 3D cultures 24 h after seeding. The early expression of osteoblast genes was dependent on the 3D structure and was not induced in cells growing on collagen-coated dishes in 2D. Comparison of thymidine incorporation between cells in 3D and 2D cultures treated with agents that induce proliferation-transforming growth factor β, platelet-derived growth factor and lactoferrin-showed a much greater response in 3D gels. Cells in 3D cultures were also much more sensitive to inhibition of proliferation by the protein kinase inhibitor imatinib mesylate. The 3D collagen gels better represent the physiological bone environment and offer a number of technical advantages for the study of osteoblasts in vitro. These studies have additional practical implications as 3D collagen gels are considered as a scaffold material in regenerative medicine for the repair of bone defects.

Augmentation with an ovine forestomach matrix scaffold improves histological outcomes of rotator cuff repair in a rat model.

BackgroundRotator cuff tears can cause significant pain and functional impairment. Without surgical repair, the rotator cuff has little healing potential, and following surgical repair, they are highly prone to re-rupture. Augmenting such repairs with a biomaterial scaffold has been suggested as a potential solution. Extracellular matrix (ECM)-based scaffolds are the most commonly used rotator cuff augments, although to date, reports on their success are variable. Here, we utilize pre-clinical in vitro and in vivo assays to assess the efficacy of a novel biomaterial scaffold, ovine forestomach extracellular matrix (OFM), in augmenting rotator cuff repair.MethodsOFM was assessed in vitro for primary tenocyte growth and adherence, and for immunogenicity using an assay of primary human dendritic cell activation. In vivo, using a murine model, supraspinatus tendon repairs were carried out in 34 animals. Augmentation with OFM was compared to sham surgery and unaugmented control. At 6- and 12-week time points, the repairs were analysed biomechanically for strength of repair and histologically for quality of healing.ResultsOFM supported tenocyte growth in vitro and did not cause an immunogenic response. Augmentation with OFM improved the quality of healing of the repaired tendon, with no evidence of excessive inflammatory response. However, there was no biomechanical advantage of augmentation.ConclusionsThe ideal rotator cuff tendon augment has not yet been identified or clinically implemented. ECM scaffolds offer a promising solution to a difficult clinical problem. Here, we have shown improved histological healing with OFM augmentation. Identifying materials that offset the poorer mechanical properties of the rotator cuff post-injury/repair and enhance organised tendon healing will be paramount to incorporating augmentation into surgical treatment of the rotator cuff.

Cell–cell communication in bone development and whole-body homeostasis and pharmacological avenues for bone disorders

HighlightsRecent advances in signalling pathways regulating the communication of bone cells.Recent findings in bone‐derived factors and their endocrine functions.Potential pharmacologic target in bone—Wnt or PPAR&ggr; pathways. &NA; Cell–cell communication plays a crucial role in bone development and maintenance, in health and disease. Our knowledge of the signalling pathways that regulate the communication of osteoblasts, osteoclasts and osteocytes is improving with time, giving us a better understanding of the regulation of the bone remodelling process. Bone cell communication has wider significance than the local tissue environment, however, with bone derived factors playing a role in whole‐body homeostasis, including energy metabolism and kidney function. Similarly, there are a range of systemic conditions which affect the maintenance of bone mass. Understanding these complex interactions, the autocrine, paracrine and endocrine signalling involved in the regulation of bone health is paramount to a better understanding of bone disease, and ultimately developing targets for pharmaceutical intervention.

Applying Physiologically Relevant Strains to Tenocytes in an In Vitro Cell Device Induces In Vivo Like Behaviors.

We have developed a novel cell stretching device (called Cell Gym) capable of applying physiologically relevant low magnitude strains to tenocytes on a collagen type I coated membrane. We validated our device thoroughly on two levels: (1) substrate strains, (2) cell level strains. Our cell level strain results showed that the applied stretches were transferred to cells accurately (∼90%). Our gene expression data showed that mechanically stimulated tenocytes (4%) expressed a lower level of COL I gene. COX2 gene was increased but did not reach statistical significance. Our device was then tested to see if it could reproduce results from an in vivo study that measured time-dependent changes in collagen synthesis. Our results showed that collagen synthesis peaked at 24 hrs after exercise and then decreased, which matched the results from the in vivo study. Our study demonstrated that it is important to incorporate physiologically relevant low strain magnitudes in in vitro cell mechanical studies and the need to validate the device thoroughly to operate the device at small strains. This device will be used in designing novel tendon tissue engineering scaffolds in the future.

Local Application of Lactoferrin Promotes Bone Regeneration In a Rat Critical‐Sized Calvarial Defect Model As Demonstrated by Micro‐CT And Histological Analysis

Lactoferrin is a multifunctional glycoprotein with therapeutic potential for bone tissue engineering. The aim of this study was to assess the efficacy of local application of lactoferrin on bone regeneration. Five‐millimetre critical‐sized defects were created over the right parietal bone in 64 Sprague–Dawley rats. The rats were randomized into four groups: group 1 (n  =  20) had empty defects; group 2 (n  =  20) had defects grafted with collagen gels (3 mg/ml); group 3 (n  =  20) had defects grafted with collagen gels impregnated with bovine lactoferrin (10 μg/gel); and group 4 (n  =  4) had sham surgeries (skin and periosteal incisions only). The rats were sacrificed at 4 or 12 weeks post‐operatively, and the calvaria were excised and evaluated with micro‐CT (Skyscan 1172) followed by histology. The bone volume fraction (BV/TV) was higher in lactoferrin‐treated animals at both timepoints, with groups 1, 2, 3 and 4 measuring 10.5  ±  1.1%, 8.6  ±  1.4%, 16.5  ±  0.6% and 24.27  ±  2.6%, respectively, at 4 weeks (P  <  0.05); and 12.2  ±  1.3%, 13.6  ±  1.5%, 21.9  ±  1.2% and 29.3  ±  0.8%, respectively, at 12 weeks (P  <  0.05). Histological analysis revealed that the newly formed bone within the calvarial defects of all groups was a mixture of woven and lamellar bone, with more bone in the group treated with lactoferrin at both timepoints. Our study demonstrated that local application of lactoferrin significantly increased bone regeneration in a rat critical‐sized calvarial defect model. The profound effect of lactoferrin on bone regeneration has therapeutic potential to improve the poor clinical outcomes associated with bony non‐union. LF In Vivo JTERM Authors Contributions. Copyright

The Efficacy of Local Autologous Bone Dust: A Systematic Review

STUDY DESIGN A systematic review of bone dust as an autologous bone graft to encourage osseous fusion. OBJECTIVE To identify and review studies that report on the therapeutic potential of bone dust. The research question was structured as follows: populations-animal and human sources of bone dust harvested using burrs; interventions-autologous bone dust compared with other clinically utilized bone graft options; outcomes assessed-(1) in vitro cell viability, cell differentiation, and osteogenic potential and (2) clinical efficacy in the form of fusion rates as assessed using plain radiographs; study designs-in vitro, preclinical in vivo and clinical studies investigating the therapeutic potential of bone dust, harvested by burring, are included in this systematic review. Little is known about the efficacy of bone dust, generated during burring of local bone in spine surgery, as a bone graft to encourage osseous union. METHODS A systematic search was conducted in Medline, PubMed, OVID, Scopus, and Cochrane library. The following key words were used: bone dust, bone burring, bone paste, bone pate. RESULTS A total of 285 studies were reviewed. Fourteen articles were identified as relevant for inclusion in this systematic review. Current evidence suggests that bone dust retains osteogenic properties, but limited information is available regarding the osteoinductive potential of bone dust. CONCLUSION Bone dust represents a free source of autologous bone, which can be easily collected during the time of surgery and used as an augment to aid osseous fusion. Further research is required to evaluate the osteoinductive potential of bone dust. The retained growth factors in bone dust may potentially induce local osteoprogenitor cells to proliferate and mineralize to form new bone.