Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where David R. Jackson is active.

Publication


Featured researches published by David R. Jackson.


IEEE Transactions on Antennas and Propagation | 1985

Gain enhancement methods for printed circuit antennas

David R. Jackson; Nicolaos G. Alexopoulos

Resonance conditions for a substrate-superstrate printed antenna geometry which allow for large antenna gain are presented. Asymptotic formulas for gain, beamwidth, and bandwidth are given, and the bandwidth limitation of the method is discussed. The method is extended to produce narrow patterns about the horizon, and directive patterns at two different angles.


Proceedings of the IEEE | 2012

Leaky-Wave Antennas

David R. Jackson; Christophe Caloz; Tatsuo Itoh

This paper gives a basic review and a summary of recent developments for leaky-wave antennas (LWAs). An LWA uses a guiding structure that supports wave propagation along the length of the structure, with the wave radiating or “leaking” continuously along the structure. Such antennas may be uniform, quasi-uniform, or periodic. After reviewing the basic physics and operating principles, a summary of some recent advances for these types of structures is given. Recent advances include structures that can scan to endfire, structures that can scan through broadside, structures that are conformal to surfaces, and structures that incorporate power recycling or include active elements. Some of these novel structures are inspired by recent advances in the metamaterials area.


IEEE Transactions on Antennas and Propagation | 1984

Fundamental superstrate (cover) effects on printed circuit antennas

Nicolaos G. Alexopoulos; David R. Jackson

The fundamental effects of superstrate (cover) materials on printed circuits antennas are investigated. Substrate-superstrate resonance conditions are established which maximize antenna gain, radiation resistance, and radiation efficiency. Criteria are determined for material properties and dimensions for which surface waves are eliminated and a radiation efficiency due to substrate-superstrate effects of e_{s} = 100 percent is obtained. Criteria for nearly omnidirectional \bar{H} -plane patterns and nearly omnidirctional \bar{E} -plane patterns are presented. Finally, a general criterion is given for choosing a superstrate to optimize efficiency for the important case of nonmagnetic layers with the antenna at the interface.


IEEE Transactions on Antennas and Propagation | 1988

A leaky-wave analysis of the high-gain printed antenna configuration

David R. Jackson; Arthur A. Oliner

A leaky-wave analysis is used to explain the narrow-beam resonance-gain phenomenon in which narrow beams may be produced from a printed antenna element in a substrate-superstrate geometry. It is demonstrated that the phenomenon is attributable to the presence of both transverse electric and transverse magnetic-mode leaky waves, that are excited on the structure. Asymptotic formulas for the leaky wave are compared with the exact patterns to demonstrate the dominant role of the leaky waves in determining the pattern. Results are presented as a function of frequency, the scan angle, and the permittivity of the superstrate. >


IEEE Transactions on Antennas and Propagation | 1993

Microstrip patch designs that do not excite surface waves

David R. Jackson; Jeffery T. Williams; Arun K. Bhattacharyya; Richard L. Smith; Stephen J. Buchheit; Stuart A. Long

Two variations of a circular microstrip patch design are presented which excite very little surface wave power. Both of the designs are based on the principle that a ring of magnetic current in a substrate (which models the patches) will not excite the dominant TM/sub 0/ surface wave if the radius of the ring is a particular critical value. Numerical results for radiation efficiency and radiated field strength from a ring of magnetic current are shown to verify this basic design principle. The proposed patch designs are chosen to have a radius equal to this critical value, while maintaining resonance at the design frequency. The designs excite very little surface-wave power, and thus have smoother radiation patterns when mounted on finite-size ground planes, due to reduced surface-wave diffraction. They also have reduced mutual coupling, due to the reduced surface-wave excitation. Measured results for radiation patterns and field strength within the substrate are presented to verify the theoretical concepts. >


IEEE Transactions on Antennas and Propagation | 2005

2-D periodic leaky-wave antennas-part I: metal patch design

Tianxia Zhao; David R. Jackson; Jeffery T. Williams; Hung Yu David Yang; Arthur A. Oliner

The far-field radiation characteristics of a two-dimensional (2-D) periodic leaky-wave antenna (LWA) constructed from a periodic array of metal patches on a grounded dielectric substrate is investigated. A simple dipole source is used as the excitation. Reciprocity together with a periodic spectral-domain method of moments is used to calculate the far-field pattern. Design rules for the scan angle, the substrate dielectric constant, and the periodicity are provided. Finally, a comparison of the 2-D periodic LWA and a dielectric-layer LWA is given to show the similar performance of the two antennas.


IEEE Transactions on Antennas and Propagation | 2006

Fundamental properties and optimization of broadside radiation from uniform leaky-wave antennas

Giampiero Lovat; Paolo Burghignoli; David R. Jackson

In this paper, radiation at broadside is studied for a general class of leaky-wave antennas (LWAs) comprised of a grounded slab covered with a partially reflecting surface, on the basis of a simple transverse equivalent network model of the structure. The analysis of the one-dimensional (1-D) version of such a LWA excited by a line source shows that a central role in establishing the features of broadside radiation is played by the condition that the phase and attenuation constants of the leaky mode responsible for radiation are equal. When this happens, a beam with a single peak at broadside is on the verge of splitting into two distinct peaks, and maximum power density is radiated at broadside. Design formulas to achieve such an optimized condition, as well as approximate expressions for the frequency bandwidth and pattern beamwidth of the antenna and for the leaky-wave phase and attenuation constants are derived, both in the absence and in the presence of losses; in addition, an optimal-beamwidth condition (which gives the narrowest broadside beam) is derived. Finally, all the results are extended to the practical case of a 2-D LWA excited by a horizontal dipole


IEEE Transactions on Antennas and Propagation | 2006

Analysis of directive radiation from a line source in a metamaterial slab with low permittivity

Giampiero Lovat; Paolo Burghignoli; Filippo Capolino; David R. Jackson; Donald R. Wilton

In this paper an investigation is presented of metamaterial structures excited by a line source aimed at producing narrow directive beams. The structure under consideration is a grounded slab made of a homogeneous metamaterial medium with a plasma-like dispersive permittivity; for low values of the slab permittivity an extremely directive beam pointing at broadside can be obtained. Conditions for the maximization of radiation at broadside are given and the narrow-beam effect is shown to be related to the excitation of a leaky mode supported by the slab, with radiation maximization corresponding to small and equal values of the phase and attenuation constants. The frequency bandwidth and directivity are expressed in a simple closed form in terms of the attenuation constant of the leaky mode. By increasing the slab height for a fixed frequency, the leaky mode is analytically shown to give rise to a beam that is scanned from broadside to the critical angle for plane-wave refraction, thus being confined to a narrow angular region around broadside. Numerical results are given that illustrate these features, and full-wave simulations of a metamaterial structure made of an array of metallic cylinders are presented that confirm the results of the analytical study. The case of a line source inside a semi-infinite metamaterial region is also considered and its radiation characteristics compared with those of the metamaterial slab


IEEE Transactions on Antennas and Propagation | 1993

Leaky-wave propagation and radiation for a narrow-beam multiple-layer dielectric structure

David R. Jackson; Arthur A. Oliner; Antonio Ip

Previous work has demonstrated that very narrow beam radiation patterns can be obtained from a simple source embedded within multiple dielectric layers of appropriate thicknesses above a ground plane. The configuration consists of dielectric layers having permittivities epsilon /sub 1/ and epsilon /sub 2/ stacked in an alternating arrangement, with epsilon /sub 2/> epsilon /sub 1/. This narrow-beam effect can be attributed to weakly attenuated leaky waves that exist on the structure. Simple asymptotic formulas for the propagation and attenuation constants are derived. The formulas show how the beamwidth varies with the number of layers and the material constants. The exact radiation pattern is compared with the leaky-wave pattern for a specific case to demonstrate the role of the leaky waves in determining the total pattern. >


IEEE Transactions on Antennas and Propagation | 2012

Substrate Integrated Waveguide (SIW) Leaky-Wave Antenna With Transverse Slots

Juhua Liu; David R. Jackson; Yunliang Long

A novel slotted substrate integrated waveguide (SIW) leaky-wave antenna is proposed. This antenna works in the TE10 mode of the SIW. Leakage is obtained by introducing a periodic set of transverse slots on the top of the SIW, which interrupt the current flow on the top wall. It is seen that three modes (a leaky mode, a proper waveguide mode, and a surface-wave-like mode) can all propagate on this structure. The wavenumbers of the modes are calculated theoretically and are numerically evaluated by HFSS simulation. The leakage loss, dielectric loss, and conductor loss are also analyzed. A uniform slotted SIW leaky-wave antenna is designed that has good beam scanning from near broadside (though not exactly at broadside) to forward endfire. This type of SIW leaky-wave antenna has a wide impedance bandwidth and a narrow beam that scans with frequency. Measured results are consistent with the simulation and the theoretical analysis.

Collaboration


Dive into the David R. Jackson's collaboration.

Top Co-Authors

Avatar
Top Co-Authors

Avatar

Jeffery T. Williams

Sandia National Laboratories

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Paolo Burghignoli

Sapienza University of Rome

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Ji Chen

University of Houston

View shared research outputs
Top Co-Authors

Avatar

Paolo Baccarelli

Sapienza University of Rome

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Giampiero Lovat

Sapienza University of Rome

View shared research outputs
Researchain Logo
Decentralizing Knowledge